[U-Boot] [PATCH v3 3/9] arm: socfpga: mcvevk: Adding handoff for SDRAM ctrlcfg.extratime1

[Chin Liang See]

Adding new handoff for SDRAM ctrcfg.extratime1 which is
required for stable LPDDR2 operation. Since the board is
using DDR3, the handoff is set to default value 0.

Signed-off-by: Chin Liang See <clsee at altera.com>
Cc: Marek Vasut <marex at denx.de>
Cc: Dinh Nguyen <dinguyen at opensource.altera.com>
---
Changes for v3
- Add macro for all boards to avoid ifdef
---
 board/denx/mcvevk/qts/sdram_config.h | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/board/denx/mcvevk/qts/sdram_config.h b/board/denx/mcvevk/qts/sdram_config.h
index 30c4d7d..ff64f55 100644
--- a/board/denx/mcvevk/qts/sdram_config.h
+++ b/board/denx/mcvevk/qts/sdram_config.h
@@ -49,6 +49,9 @@
 #define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TRTP			5
 #define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING4_PWRDOWNEXIT		3
 #define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING4_SELFRFSHEXIT		512
+#define CONFIG_HPS_SDR_CTRLCFG_EXTRATIME1_CFG_EXTRA_CTL_CLK_RD_TO_WR 0
+#define CONFIG_HPS_SDR_CTRLCFG_EXTRATIME1_CFG_EXTRA_CTL_CLK_RD_TO_WR_BC 0
+#define CONFIG_HPS_SDR_CTRLCFG_EXTRATIME1_CFG_EXTRA_CTL_CLK_RD_TO_WR_DIFF_CHIP 0
 #define CONFIG_HPS_SDR_CTRLCFG_FIFOCFG_INCSYNC			0
 #define CONFIG_HPS_SDR_CTRLCFG_FIFOCFG_SYNCMODE			0
 #define CONFIG_HPS_SDR_CTRLCFG_FPGAPORTRST			0x0
-- 
2.2.2