[U-Boot] [Patch v6 8/9] armv8: ls1046ardb: Add LS1046ARDB board support

york sun york.sun at nxp.com
Wed Sep 21 17:31:18 CEST 2016


On 09/21/2016 12:46 AM, Mingkai Hu wrote:
>
>
>> -----Original Message-----
>> From: york sun
>> Sent: Saturday, September 17, 2016 4:14 AM
>> To: Q.Y. Gong <qianyu.gong at nxp.com>; u-boot at lists.denx.de
>> Cc: Prabhakar Kushwaha <prabhakar.kushwaha at nxp.com>; Mingkai Hu
>> <mingkai.hu at nxp.com>; S.H. Xie <shaohui.xie at nxp.com>; Z.Q. Hou
>> <zhiqiang.hou at nxp.com>; Wenbin Song <wenbin.song at nxp.com>;
>> Shengzhou Liu <shengzhou.liu at nxp.com>
>> Subject: Re: [Patch v6 8/9] armv8: ls1046ardb: Add LS1046ARDB board
>> support
>>
>> On 09/07/2016 03:08 AM, Gong Qianyu wrote:
>>> From: Mingkai Hu <mingkai.hu at nxp.com>
>>>
>>> LS1046ARDB Specification:
>>> -------------------------
>>> Memory subsystem:
>>>  * 8GByte DDR4 SDRAM (64bit bus)
>>>  * 512 Mbyte NAND flash
>>>  * Two 64 Mbyte high-speed SPI flash
>>>  * SD connector to interface with the SD memory card
>>>  * On-board 4G eMMC
>>>
>>> Ethernet:
>>>  * Two XFI 10G ports
>>>  * Two SGMII ports
>>>  * Two RGMII ports
>>>
>>> PCIe:
>>>  * PCIe1 (SerDes2 Lane0) to miniPCIe slot
>>>  * PCIe2 (SerDes2 Lane1) to x2 PCIe slot
>>>  * PCIe3 (SerDes2 Lane2) to x4 PCIe slot
>>
>> Why don't you enable PCIe in the config file?
>>
>
> A follow up patch will enable PCIe support which will use the SVR to differentiate some memory map differences
> for different silicon.

OK. Thanks.
Please note, even I accepted this patch set, it has not been merged due 
to some upstream changes (specifically ad-hoc config ban). I am working 
to get them merged.

York



More information about the U-Boot mailing list