[U-Boot] [PATCH v2] drivers: usb: fsl-dt-fixup: Fix the dt for multiple USB nodes in single traversal of device tree
Marek Vasut
marex at denx.de
Wed Sep 14 23:22:18 CEST 2016
On 09/14/2016 07:22 AM, Sriram Dash wrote:
>> From: Sriram Dash [mailto:sriram.dash at nxp.com]
>>
>
> Hello Marek,
>
> Any comments?
Waiting for York to review this.
It's a bulky patch V2 without changelog, shall I review the whole thing
again ?
>> For FSL USB node fixup, the dt is walked multiple times for fixing erratum and phy
>> type. This patch walks the tree and fixes the node till no more USB nodes are left.
>>
>> Signed-off-by: Sriram Dash <sriram.dash at nxp.com>
>> Signed-off-by: Rajesh Bhagat <rajesh.bhagat at nxp.com>
>> ---
>> drivers/usb/common/fsl-dt-fixup.c | 108 +++++++++++++++++---------------------
>> 1 file changed, 47 insertions(+), 61 deletions(-)
>>
>> diff --git a/drivers/usb/common/fsl-dt-fixup.c b/drivers/usb/common/fsl-dt-fixup.c
>> index 9c48852..df785a6 100644
>> --- a/drivers/usb/common/fsl-dt-fixup.c
>> +++ b/drivers/usb/common/fsl-dt-fixup.c
>> @@ -54,25 +54,19 @@ static int fdt_usb_get_node_type(void *blob, int
>> start_offset, }
>>
>> static int fdt_fixup_usb_mode_phy_type(void *blob, const char *mode,
>> - const char *phy_type, int start_offset)
>> + const char *phy_type, int node_offset,
>> + const char **node_type)
>> {
>> const char *prop_mode = "dr_mode";
>> const char *prop_type = "phy_type";
>> - const char *node_type = NULL;
>> - int node_offset;
>> - int err;
>> -
>> - err = fdt_usb_get_node_type(blob, start_offset,
>> - &node_offset, &node_type);
>> - if (err < 0)
>> - return err;
>> + int err = 0;
>>
>> if (mode) {
>> err = fdt_setprop(blob, node_offset, prop_mode, mode,
>> strlen(mode) + 1);
>> if (err < 0)
>> printf("WARNING: could not set %s for %s: %s.\n",
>> - prop_mode, node_type, fdt_strerror(err));
>> + prop_mode, *node_type, fdt_strerror(err));
>> }
>>
>> if (phy_type) {
>> @@ -80,52 +74,48 @@ static int fdt_fixup_usb_mode_phy_type(void *blob, const
>> char *mode,
>> strlen(phy_type) + 1);
>> if (err < 0)
>> printf("WARNING: could not set %s for %s: %s.\n",
>> - prop_type, node_type, fdt_strerror(err));
>> + prop_type, *node_type, fdt_strerror(err));
>> }
>>
>> - return node_offset;
>> + return err;
>> }
>>
>> static int fdt_fixup_usb_erratum(void *blob, const char *prop_erratum,
>> - const char *controller_type, int start_offset)
>> + const char *controller_type, int node_offset,
>> + const char **node_type)
>> {
>> - int node_offset, err;
>> - const char *node_type = NULL;
>> + int err = -1;
>> const char *node_name = NULL;
>>
>> - err = fdt_usb_get_node_type(blob, start_offset,
>> - &node_offset, &node_type);
>> - if (err < 0)
>> - return err;
>> -
>> - if (!strcmp(node_type, FSL_USB2_MPH) || !strcmp(node_type,
>> FSL_USB2_DR))
>> + if (!strcmp(*node_type, FSL_USB2_MPH) ||
>> + !strcmp(*node_type, FSL_USB2_DR))
>> node_name = CHIPIDEA_USB2;
>> else
>> - node_name = node_type;
>> + node_name = *node_type;
>> if (strcmp(node_name, controller_type))
>> return err;
>>
>> err = fdt_setprop(blob, node_offset, prop_erratum, NULL, 0);
>> if (err < 0) {
>> printf("ERROR: could not set %s for %s: %s.\n",
>> - prop_erratum, node_type, fdt_strerror(err));
>> + prop_erratum, *node_type, fdt_strerror(err));
>> }
>>
>> - return node_offset;
>> + return err;
>> }
>>
>> -static int fdt_fixup_erratum(int *usb_erratum_off, void *blob,
>> +static int fdt_fixup_erratum(int node_offset, void *blob,
>> const char *controller_type, char *str,
>> - bool (*has_erratum)(void))
>> + bool (*has_erratum)(void), const char **node_type)
>> {
>> char buf[32] = {0};
>>
>> snprintf(buf, sizeof(buf), "fsl,usb-erratum-%s", str);
>> if (!has_erratum())
>> return -EINVAL;
>> - *usb_erratum_off = fdt_fixup_usb_erratum(blob, buf, controller_type,
>> - *usb_erratum_off);
>> - if (*usb_erratum_off < 0)
>> + node_offset = fdt_fixup_usb_erratum(blob, buf, controller_type,
>> + node_offset, node_type);
>> + if (node_offset < 0)
>> return -ENOSPC;
>> debug("Adding USB erratum %s\n", str);
>> return 0;
>> @@ -135,23 +125,23 @@ void fdt_fixup_dr_usb(void *blob, bd_t *bd) {
>> static const char * const modes[] = { "host", "peripheral", "otg" };
>> static const char * const phys[] = { "ulpi", "utmi", "utmi_dual" };
>> - int usb_erratum_a006261_off = -1;
>> - int usb_erratum_a007075_off = -1;
>> - int usb_erratum_a007792_off = -1;
>> - int usb_erratum_a005697_off = -1;
>> - int usb_erratum_a008751_off = -1;
>> - int usb_mode_off = -1;
>> - int usb_phy_off = -1;
>> + const char *node_type = NULL;
>> + int node_offset = -1;
>> char str[5];
>> - int i, j;
>> - int ret;
>> + int i = 1, j;
>> + int ret, err;
>>
>> - for (i = 1; i <= CONFIG_USB_MAX_CONTROLLER_COUNT; i++) {
>> + do {
>> const char *dr_mode_type = NULL;
>> const char *dr_phy_type = NULL;
>> int mode_idx = -1, phy_idx = -1;
>>
>> - snprintf(str, 5, "%s%d", "usb", i);
>> + err = fdt_usb_get_node_type(blob, node_offset,
>> + &node_offset, &node_type);
>> + if (err < 0)
>> + return;
>> +
>> + snprintf(str, 5, "%s%d", "usb", i++);
>> if (hwconfig(str)) {
>> for (j = 0; j < ARRAY_SIZE(modes); j++) {
>> if (hwconfig_subarg_cmp(str, "dr_mode", @@ -
>> 184,45 +174,41 @@ void fdt_fixup_dr_usb(void *blob, bd_t *bd)
>> if (has_dual_phy())
>> dr_phy_type = phys[2];
>>
>> - usb_mode_off = fdt_fixup_usb_mode_phy_type(blob,
>> - dr_mode_type, NULL,
>> - usb_mode_off);
>> -
>> - if (usb_mode_off < 0)
>> + err = fdt_fixup_usb_mode_phy_type(blob, dr_mode_type, NULL,
>> + node_offset, &node_type);
>> + if (err < 0)
>> return;
>>
>> - usb_phy_off = fdt_fixup_usb_mode_phy_type(blob,
>> - NULL, dr_phy_type,
>> - usb_phy_off);
>> -
>> - if (usb_phy_off < 0)
>> + err = fdt_fixup_usb_mode_phy_type(blob, NULL, dr_phy_type,
>> + node_offset, &node_type);
>> + if (err < 0)
>> return;
>>
>> - ret = fdt_fixup_erratum(&usb_erratum_a006261_off, blob,
>> + ret = fdt_fixup_erratum(node_offset, blob,
>> CHIPIDEA_USB2, "a006261",
>> - has_erratum_a006261);
>> + has_erratum_a006261, &node_type);
>> if (ret == -ENOSPC)
>> return;
>> - ret = fdt_fixup_erratum(&usb_erratum_a007075_off, blob,
>> + ret = fdt_fixup_erratum(node_offset, blob,
>> CHIPIDEA_USB2, "a007075",
>> - has_erratum_a007075);
>> + has_erratum_a007075, &node_type);
>> if (ret == -ENOSPC)
>> return;
>> - ret = fdt_fixup_erratum(&usb_erratum_a007792_off, blob,
>> + ret = fdt_fixup_erratum(node_offset, blob,
>> CHIPIDEA_USB2, "a007792",
>> - has_erratum_a007792);
>> + has_erratum_a007792, &node_type);
>> if (ret == -ENOSPC)
>> return;
>> - ret = fdt_fixup_erratum(&usb_erratum_a005697_off, blob,
>> + ret = fdt_fixup_erratum(node_offset, blob,
>> CHIPIDEA_USB2, "a005697",
>> - has_erratum_a005697);
>> + has_erratum_a005697, &node_type);
>> if (ret == -ENOSPC)
>> return;
>> - ret = fdt_fixup_erratum(&usb_erratum_a008751_off, blob,
>> + ret = fdt_fixup_erratum(node_offset, blob,
>> SNPS_DWC3, "a008751",
>> - has_erratum_a008751);
>> + has_erratum_a008751, &node_type);
>> if (ret == -ENOSPC)
>> return;
>>
>> - }
>> + } while (node_offset > 0);
>> }
>> --
>> 2.1.0
>
--
Best regards,
Marek Vasut
More information about the U-Boot
mailing list