[U-Boot] [PATCH 4/5] imx: mx6ullevk: support plugin

[Peng Fan]

On Thu, Sep 22, 2016 at 11:48:16AM -0400, Tom Rini wrote:
>On Mon, Sep 19, 2016 at 11:55:43AM +0800, van.freenix at gmail.com wrote:
>
>> From: Peng Fan <peng.fan at nxp.com>
>> 
>> Add plugin code for mx6ullevk.
>> Define CONFIG_USE_PLUGIN in include/configs/mx6ullevk.h to use plugin code.
>> 
>> Signed-off-by: Peng Fan <peng.fan at nxp.com>
>> Cc: Stefano Babic <sbabic at denx.de>
>
>So we need an option in arch/arm/cpu/armv7/mx6/Kconfig to offer plugin
>support, and 'USE_PLUGIN' is too generic of a name.  Perhaps
>USE_IMXIMG_PLUGIN ?

Yeah. Will include this only for plugin board code. About host tools,
I'll try to make PLUGIN always be there.

>
>> ---
>>  board/freescale/mx6ullevk/Makefile |   4 ++
>>  board/freescale/mx6ullevk/plugin.S | 139 +++++++++++++++++++++++++++++++++++++
>>  2 files changed, 143 insertions(+)
>>  create mode 100644 board/freescale/mx6ullevk/plugin.S
>> 
>> diff --git a/board/freescale/mx6ullevk/Makefile b/board/freescale/mx6ullevk/Makefile
>> index c64fba4..0ee905b 100644
>> --- a/board/freescale/mx6ullevk/Makefile
>> +++ b/board/freescale/mx6ullevk/Makefile
>> @@ -4,3 +4,7 @@
>>  #
>>  
>>  obj-y  := mx6ullevk.o
>> +
>> +extra-$(CONFIG_USE_PLUGIN) :=  plugin.bin
>> +$(obj)/plugin.bin: $(obj)/plugin.o
>> +	$(OBJCOPY) -O binary --gap-fill 0xff $< $@
>
>And then we can move this logic up a bit higher and say that
>$(BOARDDIR)/plugin.S will make $(BOARDDIR)/plugin.bin or so

Will add this to arch/arm/imx-common/Makefile.

Thanks,
Peng.

>
>Thanks!
>
>-- 
>Tom



--