[U-Boot] [PATCH 2/2] spi: ti_qspi: Remove unnecessary udelay for AM437x

[Vignesh R]

This udelay() was added as an HACK and is no longer required. All
read/write/erase operations work fine even without this delay. Hence,
remove the udelay() call.

Tested read/write/erase operation on AM437x SK. Also tested QSPI Boot.

Signed-off-by: Vignesh R <vigneshr at ti.com>
---
 drivers/spi/ti_qspi.c | 7 -------
 1 file changed, 7 deletions(-)

diff --git a/drivers/spi/ti_qspi.c b/drivers/spi/ti_qspi.c
index fe2a280cc7ae..1c215a0f89e2 100644
--- a/drivers/spi/ti_qspi.c
+++ b/drivers/spi/ti_qspi.c
@@ -225,13 +225,6 @@ static int __ti_qspi_xfer(struct ti_qspi_priv *priv, unsigned int bitlen,
 		priv->cmd |= QSPI_3_PIN;
 	priv->cmd |= 0xfff;
 
-/* FIXME: This delay is required for successfull
- * completion of read/write/erase. Once its root
- * caused, it will be remove from the driver.
- */
-#ifdef CONFIG_AM43XX
-	udelay(100);
-#endif
 	while (words) {
 		u8 xfer_len = 0;
 
-- 
2.9.3