[U-Boot] Sdcard boot for a generic allwinner q8 clone A33 tablet not work.
far5893
far5893 at iperbole.bologna.it
Fri Sep 9 14:10:38 CEST 2016
Hi,
i'm trying to boot a classic A33 q8 clone with uboot copied in sdcard
but nothing happen (not backlight on)
dd if=u-boot-sunxi-with-spl.bin of=/dev/sdb bs=1024 seek=8 on the partitioned sdcard for reference
if i compile with configuration for A13 based tablet on A13 based tablet it work like charm,
so i suppose i'm not in wrong in my setup, how can i debug ?
I dont have sd/usart adapter so i cannot boot from fel, there is a way
to make blink backlight to understand if it is working and is an lcd problem ?
On original android it work perfectly.
I attach original fex and .configure for your references.
Thank
-------------- next part --------------
#
# Automatically generated file; DO NOT EDIT.
# U-Boot 2016.09-rc2 Configuration
#
CONFIG_CREATE_ARCH_SYMLINK=y
# CONFIG_ARC is not set
CONFIG_ARM=y
# CONFIG_AVR32 is not set
# CONFIG_BLACKFIN is not set
# CONFIG_M68K is not set
# CONFIG_MICROBLAZE is not set
# CONFIG_MIPS is not set
# CONFIG_NDS32 is not set
# CONFIG_NIOS2 is not set
# CONFIG_OPENRISC is not set
# CONFIG_PPC is not set
# CONFIG_SANDBOX is not set
# CONFIG_SH is not set
# CONFIG_SPARC is not set
# CONFIG_X86 is not set
# CONFIG_XTENSA is not set
CONFIG_SYS_ARCH="arm"
CONFIG_SYS_CPU="armv7"
CONFIG_SYS_SOC="sunxi"
CONFIG_SYS_BOARD="sunxi"
CONFIG_SYS_CONFIG_NAME="sun8i"
#
# ARM architecture
#
CONFIG_HAS_VBAR=y
CONFIG_HAS_THUMB2=y
CONFIG_CPU_V7=y
CONFIG_SYS_ARM_ARCH=7
# CONFIG_SEMIHOSTING is not set
# CONFIG_SYS_L2CACHE_OFF is not set
# CONFIG_ENABLE_ARM_SOC_BOOT0_HOOK is not set
# CONFIG_ARCH_AT91 is not set
# CONFIG_TARGET_EDB93XX is not set
# CONFIG_TARGET_VCMA9 is not set
# CONFIG_TARGET_SMDK2410 is not set
# CONFIG_TARGET_ASPENITE is not set
# CONFIG_TARGET_GPLUGD is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_KIRKWOOD is not set
# CONFIG_ARCH_MVEBU is not set
# CONFIG_TARGET_DEVKIT3250 is not set
# CONFIG_TARGET_WORK_92105 is not set
# CONFIG_TARGET_MX25PDK is not set
# CONFIG_TARGET_ZMX25 is not set
# CONFIG_TARGET_APF27 is not set
# CONFIG_TARGET_APX4DEVKIT is not set
# CONFIG_TARGET_XFI3 is not set
# CONFIG_TARGET_M28EVK is not set
# CONFIG_TARGET_MX23EVK is not set
# CONFIG_TARGET_MX28EVK is not set
# CONFIG_TARGET_MX23_OLINUXINO is not set
# CONFIG_TARGET_BG0900 is not set
# CONFIG_TARGET_SANSA_FUZE_PLUS is not set
# CONFIG_TARGET_SC_SPS_1 is not set
# CONFIG_ORION5X is not set
# CONFIG_TARGET_SPEAR300 is not set
# CONFIG_TARGET_SPEAR310 is not set
# CONFIG_TARGET_SPEAR320 is not set
# CONFIG_TARGET_SPEAR600 is not set
# CONFIG_TARGET_STV0991 is not set
# CONFIG_TARGET_X600 is not set
# CONFIG_TARGET_IMX31_PHYCORE is not set
# CONFIG_TARGET_MX31ADS is not set
# CONFIG_TARGET_MX31PDK is not set
# CONFIG_TARGET_WOODBURN is not set
# CONFIG_TARGET_WOODBURN_SD is not set
# CONFIG_TARGET_FLEA3 is not set
# CONFIG_TARGET_MX35PDK is not set
# CONFIG_ARCH_BCM283X is not set
# CONFIG_TARGET_VEXPRESS_CA15_TC2 is not set
# CONFIG_TARGET_VEXPRESS_CA5X2 is not set
# CONFIG_TARGET_VEXPRESS_CA9X4 is not set
# CONFIG_TARGET_BRXRE1 is not set
# CONFIG_TARGET_BRPPT1 is not set
# CONFIG_TARGET_CM_T335 is not set
# CONFIG_TARGET_PEPPER is not set
# CONFIG_TARGET_AM335X_IGEP0033 is not set
# CONFIG_TARGET_PCM051 is not set
# CONFIG_TARGET_DRACO is not set
# CONFIG_TARGET_THUBAN is not set
# CONFIG_TARGET_RASTABAN is not set
# CONFIG_TARGET_ETAMIN is not set
# CONFIG_TARGET_PXM2 is not set
# CONFIG_TARGET_RUT is not set
# CONFIG_TARGET_PENGWYN is not set
# CONFIG_TARGET_AM335X_BALTOS is not set
# CONFIG_TARGET_AM335X_EVM is not set
# CONFIG_TARGET_AM335X_SHC is not set
# CONFIG_TARGET_AM335X_SL50 is not set
# CONFIG_TARGET_BAV335X is not set
# CONFIG_TARGET_TI814X_EVM is not set
# CONFIG_TARGET_TI816X_EVM is not set
# CONFIG_TARGET_BCM23550_W1D is not set
# CONFIG_TARGET_BCM28155_AP is not set
# CONFIG_TARGET_BCMCYGNUS is not set
# CONFIG_TARGET_BCMNSP is not set
# CONFIG_ARCH_EXYNOS is not set
# CONFIG_ARCH_S5PC1XX is not set
# CONFIG_ARCH_HIGHBANK is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_KEYSTONE is not set
# CONFIG_ARCH_MESON is not set
# CONFIG_ARCH_MX7 is not set
# CONFIG_ARCH_MX6 is not set
# CONFIG_ARCH_MX5 is not set
# CONFIG_TARGET_M53EVK is not set
# CONFIG_TARGET_MX51EVK is not set
# CONFIG_TARGET_MX53ARD is not set
# CONFIG_TARGET_MX53EVK is not set
# CONFIG_TARGET_MX53LOCO is not set
# CONFIG_TARGET_MX53SMD is not set
# CONFIG_OMAP34XX is not set
# CONFIG_OMAP44XX is not set
# CONFIG_OMAP54XX is not set
# CONFIG_AM43XX is not set
# CONFIG_ARCH_RMOBILE is not set
# CONFIG_TARGET_S32V234EVB is not set
# CONFIG_ARCH_SNAPDRAGON is not set
# CONFIG_ARCH_SOCFPGA is not set
# CONFIG_TARGET_CM_T43 is not set
CONFIG_ARCH_SUNXI=y
# CONFIG_TARGET_TS4800 is not set
# CONFIG_TARGET_VF610TWR is not set
# CONFIG_TARGET_COLIBRI_VF is not set
# CONFIG_TARGET_PCM052 is not set
# CONFIG_ARCH_ZYNQ is not set
# CONFIG_ARCH_ZYNQMP is not set
# CONFIG_TEGRA is not set
# CONFIG_TARGET_VEXPRESS64_AEMV8A is not set
# CONFIG_TARGET_VEXPRESS64_BASE_FVP is not set
# CONFIG_TARGET_VEXPRESS64_BASE_FVP_DRAM is not set
# CONFIG_TARGET_VEXPRESS64_JUNO is not set
# CONFIG_TARGET_LS2080A_EMU is not set
# CONFIG_TARGET_LS2080A_SIMU is not set
# CONFIG_TARGET_LS2080AQDS is not set
# CONFIG_TARGET_LS2080ARDB is not set
# CONFIG_TARGET_HIKEY is not set
# CONFIG_TARGET_LS1012AQDS is not set
# CONFIG_TARGET_LS1012ARDB is not set
# CONFIG_TARGET_LS1012AFRDM is not set
# CONFIG_TARGET_LS1021AQDS is not set
# CONFIG_TARGET_LS1021ATWR is not set
# CONFIG_TARGET_LS1043AQDS is not set
# CONFIG_TARGET_LS1043ARDB is not set
# CONFIG_TARGET_H2200 is not set
# CONFIG_TARGET_ZIPITZ2 is not set
# CONFIG_TARGET_COLIBRI_PXA270 is not set
# CONFIG_ARCH_UNIPHIER is not set
# CONFIG_STM32 is not set
# CONFIG_ARCH_ROCKCHIP is not set
# CONFIG_TARGET_THUNDERX_88XX is not set
CONFIG_SYS_MALLOC_F_LEN=0x400
CONFIG_CPU_V7_HAS_NONSEC=y
CONFIG_CPU_V7_HAS_VIRT=y
CONFIG_ARMV7_NONSEC=y
# CONFIG_ARMV7_BOOT_SEC_DEFAULT is not set
CONFIG_ARMV7_VIRT=y
# CONFIG_ARMV7_LPAE is not set
CONFIG_SUNXI_GEN_SUN6I=y
# CONFIG_MACH_SUN4I is not set
# CONFIG_MACH_SUN5I is not set
# CONFIG_MACH_SUN6I is not set
# CONFIG_MACH_SUN7I is not set
# CONFIG_MACH_SUN8I_A23 is not set
CONFIG_MACH_SUN8I_A33=y
# CONFIG_MACH_SUN8I_A83T is not set
# CONFIG_MACH_SUN8I_H3 is not set
# CONFIG_MACH_SUN9I is not set
# CONFIG_MACH_SUN50I is not set
CONFIG_MACH_SUN8I=y
CONFIG_DRAM_CLK=360
CONFIG_DRAM_ZQ=15291
# CONFIG_DRAM_ODT_EN is not set
CONFIG_SYS_CLK_FREQ=1008000000
# CONFIG_UART0_PORT_F is not set
# CONFIG_OLD_SUNXI_KERNEL_COMPAT is not set
CONFIG_MMC=y
CONFIG_MMC0_CD_PIN="PB4"
CONFIG_MMC1_CD_PIN=""
CONFIG_MMC2_CD_PIN=""
CONFIG_MMC3_CD_PIN=""
CONFIG_MMC1_PINS=""
CONFIG_MMC2_PINS=""
CONFIG_MMC3_PINS=""
CONFIG_MMC_SUNXI_SLOT_EXTRA=-1
CONFIG_INITIAL_USB_SCAN_DELAY=0
CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE"
CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT"
CONFIG_USB0_ID_DET="PH8"
CONFIG_USB1_VBUS_PIN=""
CONFIG_USB2_VBUS_PIN=""
CONFIG_USB3_VBUS_PIN=""
# CONFIG_I2C0_ENABLE is not set
# CONFIG_I2C1_ENABLE is not set
# CONFIG_I2C2_ENABLE is not set
# CONFIG_R_I2C_ENABLE is not set
CONFIG_AXP_GPIO=y
CONFIG_VIDEO=y
# CONFIG_VIDEO_VGA_VIA_LCD is not set
CONFIG_VIDEO_LCD_MODE="x:1024,y:600,depth:18,pclk_khz:50000,le:140,ri:160,up:20,lo:12,hs:20,vs:3,sync:3,vmode:0"
CONFIG_VIDEO_LCD_DCLK_PHASE=0
CONFIG_VIDEO_LCD_POWER="PH7"
CONFIG_VIDEO_LCD_RESET=""
CONFIG_VIDEO_LCD_BL_EN="PH6"
CONFIG_VIDEO_LCD_BL_PWM="PH0"
CONFIG_VIDEO_LCD_BL_PWM_ACTIVE_LOW=y
# CONFIG_VIDEO_LCD_PANEL_I2C is not set
CONFIG_VIDEO_LCD_IF_PARALLEL=y
CONFIG_VIDEO_LCD_PANEL_PARALLEL=y
# CONFIG_VIDEO_LCD_PANEL_LVDS is not set
# CONFIG_VIDEO_LCD_PANEL_MIPI_4_LANE_513_MBPS_VIA_SSD2828 is not set
# CONFIG_VIDEO_LCD_PANEL_EDP_4_LANE_1620M_VIA_ANX9804 is not set
# CONFIG_VIDEO_LCD_PANEL_HITACHI_TX18D42VM is not set
# CONFIG_VIDEO_LCD_TL059WV5C0 is not set
CONFIG_GMAC_TX_DELAY=0
CONFIG_SPL_STACK_R_ADDR=0x4fe00000
CONFIG_DM_GPIO=y
CONFIG_DM_SERIAL=y
#
# ARM debug
#
# CONFIG_DEBUG_LL is not set
CONFIG_DM_KEYBOARD=y
CONFIG_DEFAULT_DEVICE_TREE="sun8i-a33-q8-tablet"
# CONFIG_AHCI is not set
# CONFIG_I8042_KEYB is not set
#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_SYS_MALLOC_F=y
CONFIG_EXPERT=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
# CONFIG_TOOLS_DEBUG is not set
# CONFIG_PHYS_64BIT is not set
#
# Boot images
#
CONFIG_SUPPORT_SPL=y
CONFIG_SPL=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_STACK_R=y
CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x100000
# CONFIG_SPL_SEPARATE_BSS is not set
# CONFIG_FIT is not set
CONFIG_OF_BOARD_SETUP=y
# CONFIG_OF_SYSTEM_SETUP is not set
# CONFIG_OF_STDOUT_VIA_ALIAS is not set
CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5"
CONFIG_ARCH_FIXUP_FDT=y
#
# Boot timing
#
# CONFIG_BOOTSTAGE is not set
CONFIG_BOOTSTAGE_USER_COUNT=20
CONFIG_BOOTSTAGE_STASH_ADDR=0
CONFIG_BOOTSTAGE_STASH_SIZE=4096
#
# Boot media
#
# CONFIG_NAND_BOOT is not set
# CONFIG_ONENAND_BOOT is not set
# CONFIG_QSPI_BOOT is not set
# CONFIG_SATA_BOOT is not set
# CONFIG_SD_BOOT is not set
# CONFIG_SPI_BOOT is not set
CONFIG_BOOTDELAY=2
# CONFIG_CONSOLE_RECORD is not set
# CONFIG_SYS_NO_FLASH is not set
#
# Command line interface
#
CONFIG_CMDLINE=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="=> "
#
# Autoboot options
#
CONFIG_AUTOBOOT=y
# CONFIG_AUTOBOOT_KEYED is not set
#
# FASTBOOT
#
# CONFIG_FASTBOOT is not set
#
# Commands
#
#
# Info commands
#
CONFIG_CMD_BDI=y
CONFIG_CMD_CONSOLE=y
# CONFIG_CMD_CPU is not set
# CONFIG_CMD_LICENSE is not set
#
# Boot commands
#
CONFIG_CMD_BOOTD=y
CONFIG_CMD_BOOTM=y
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_BOOTEFI=y
CONFIG_CMD_ELF=y
CONFIG_CMD_FDT=y
CONFIG_CMD_GO=y
CONFIG_CMD_RUN=y
CONFIG_CMD_IMI=y
# CONFIG_CMD_IMLS is not set
CONFIG_CMD_XIMG=y
CONFIG_CMD_POWEROFF=y
#
# Environment commands
#
# CONFIG_CMD_ASKENV is not set
CONFIG_CMD_EXPORTENV=y
CONFIG_CMD_IMPORTENV=y
CONFIG_CMD_EDITENV=y
# CONFIG_CMD_GREPENV is not set
CONFIG_CMD_SAVEENV=y
CONFIG_CMD_ENV_EXISTS=y
#
# Memory commands
#
CONFIG_CMD_MEMORY=y
CONFIG_CMD_CRC32=y
# CONFIG_LOOPW is not set
# CONFIG_CMD_MEMTEST is not set
# CONFIG_CMD_MX_CYCLIC is not set
# CONFIG_CMD_MEMINFO is not set
#
# Device access commands
#
CONFIG_CMD_DM=y
# CONFIG_CMD_DEMO is not set
CONFIG_CMD_LOADB=y
CONFIG_CMD_LOADS=y
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_ARMFLASH is not set
CONFIG_CMD_MMC=y
# CONFIG_CMD_NAND is not set
# CONFIG_CMD_SF is not set
# CONFIG_CMD_SPI is not set
# CONFIG_CMD_I2C is not set
CONFIG_CMD_USB=y
# CONFIG_CMD_DFU is not set
# CONFIG_CMD_USB_MASS_STORAGE is not set
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
#
# Shell scripting commands
#
CONFIG_CMD_ECHO=y
CONFIG_CMD_ITEST=y
CONFIG_CMD_SOURCE=y
CONFIG_CMD_SETEXPR=y
#
# Network commands
#
CONFIG_CMD_NET=y
# CONFIG_CMD_TFTPPUT is not set
# CONFIG_CMD_TFTPSRV is not set
# CONFIG_CMD_RARP is not set
CONFIG_CMD_DHCP=y
CONFIG_CMD_NFS=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
# CONFIG_CMD_CDP is not set
# CONFIG_CMD_SNTP is not set
# CONFIG_CMD_DNS is not set
# CONFIG_CMD_LINK_LOCAL is not set
#
# Misc commands
#
# CONFIG_CMD_CACHE is not set
# CONFIG_CMD_TIME is not set
CONFIG_CMD_MISC=y
# CONFIG_CMD_TIMER is not set
# CONFIG_CMD_QFW is not set
#
# Power commands
#
#
# Security commands
#
#
# Filesystem commands
#
CONFIG_CMD_EXT2=y
CONFIG_CMD_EXT4=y
# CONFIG_CMD_EXT4_WRITE is not set
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
CONFIG_SUPPORT_OF_CONTROL=y
#
# Device Tree Control
#
CONFIG_OF_CONTROL=y
# CONFIG_SPL_OF_CONTROL is not set
CONFIG_OF_SEPARATE=y
# CONFIG_OF_EMBED is not set
CONFIG_NET=y
# CONFIG_NET_RANDOM_ETHADDR is not set
# CONFIG_NETCONSOLE is not set
CONFIG_NET_TFTP_VARS=y
CONFIG_BOOTP_PXE_CLIENTARCH=0x15
CONFIG_BOOTP_VCI_STRING="U-Boot.armv7"
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_DM=y
# CONFIG_SPL_DM is not set
CONFIG_DM_WARN=y
CONFIG_DM_DEVICE_REMOVE=y
CONFIG_DM_STDIO=y
CONFIG_DM_SEQ_ALIAS=y
# CONFIG_SPL_DM_SEQ_ALIAS is not set
# CONFIG_REGMAP is not set
# CONFIG_SPL_REGMAP is not set
# CONFIG_DEVRES is not set
CONFIG_SIMPLE_BUS=y
CONFIG_OF_TRANSLATE=y
# CONFIG_ADC is not set
# CONFIG_ADC_EXYNOS is not set
# CONFIG_ADC_SANDBOX is not set
# CONFIG_BLK is not set
# CONFIG_BLOCK_CACHE is not set
#
# Clock
#
# CONFIG_CLK is not set
# CONFIG_CPU is not set
#
# Hardware crypto devices
#
# CONFIG_FSL_CAAM is not set
#
# Demo for driver model
#
# CONFIG_DM_DEMO is not set
#
# DFU support
#
# CONFIG_DFU_TFTP is not set
#
# DMA Support
#
# CONFIG_DMA is not set
# CONFIG_TI_EDMA3 is not set
#
# GPIO Support
#
# CONFIG_ALTERA_PIO is not set
# CONFIG_DWAPB_GPIO is not set
# CONFIG_ATMEL_PIO4 is not set
# CONFIG_INTEL_BROADWELL_GPIO is not set
# CONFIG_LPC32XX_GPIO is not set
# CONFIG_MSM_GPIO is not set
# CONFIG_ROCKCHIP_GPIO is not set
# CONFIG_TEGRA_GPIO is not set
# CONFIG_TEGRA186_GPIO is not set
# CONFIG_VYBRID_GPIO is not set
# CONFIG_DM_74X164 is not set
# CONFIG_DM_PCA953X is not set
# CONFIG_MPC85XX_GPIO is not set
#
# I2C support
#
# CONFIG_DM_I2C is not set
# CONFIG_DM_I2C_COMPAT is not set
# CONFIG_SYS_I2C_DW is not set
# CONFIG_CROS_EC_KEYB is not set
#
# LED Support
#
# CONFIG_LED is not set
#
# Mailbox Controller Support
#
# CONFIG_DM_MAILBOX is not set
#
# Memory Controller drivers
#
#
# Multifunction device drivers
#
# CONFIG_MISC is not set
# CONFIG_CROS_EC is not set
# CONFIG_FSL_SEC_MON is not set
# CONFIG_MXC_OCOTP is not set
# CONFIG_NUVOTON_NCT6102D is not set
# CONFIG_PWRSEQ is not set
# CONFIG_PCA9551_LED is not set
# CONFIG_WINBOND_W83627 is not set
#
# MMC Host controller Support
#
# CONFIG_DM_MMC is not set
#
# MTD Support
#
# CONFIG_MTD is not set
#
# NAND Device Support
#
# CONFIG_NAND_DENALI is not set
# CONFIG_NAND_VF610_NFC is not set
# CONFIG_NAND_PXA3XX is not set
# CONFIG_NAND_ARASAN is not set
#
# Generic NAND options
#
# CONFIG_SYS_NAND_U_BOOT_LOCATIONS is not set
# CONFIG_SPL_NAND_DENALI is not set
#
# SPI Flash Support
#
# CONFIG_SPI_FLASH is not set
CONFIG_DM_ETH=y
# CONFIG_PHYLIB is not set
CONFIG_NETDEVICES=y
# CONFIG_ALTERA_TSE is not set
# CONFIG_E1000 is not set
# CONFIG_ETH_DESIGNWARE is not set
# CONFIG_ETHOC is not set
# CONFIG_RTL8139 is not set
# CONFIG_RTL8169 is not set
# CONFIG_SUN8I_EMAC is not set
#
# PCI
#
# CONFIG_DM_PCI is not set
#
# Pin controllers
#
# CONFIG_PINCTRL is not set
#
# Power
#
#
# Power Domain Support
#
# CONFIG_POWER_DOMAIN is not set
# CONFIG_DM_PMIC is not set
# CONFIG_DM_REGULATOR is not set
# CONFIG_SUNXI_NO_PMIC is not set
CONFIG_AXP221_POWER=y
CONFIG_AXP_DCDC1_VOLT=3000
CONFIG_AXP_DCDC2_VOLT=1100
CONFIG_AXP_DCDC3_VOLT=1200
CONFIG_AXP_DCDC4_VOLT=0
CONFIG_AXP_DCDC5_VOLT=1500
CONFIG_AXP_ALDO1_VOLT=3000
CONFIG_AXP_ALDO2_VOLT=2500
CONFIG_AXP_ALDO3_VOLT=3000
CONFIG_AXP_DLDO1_VOLT=3300
CONFIG_AXP_DLDO2_VOLT=0
CONFIG_AXP_DLDO3_VOLT=0
CONFIG_AXP_DLDO4_VOLT=0
CONFIG_AXP_ELDO1_VOLT=0
CONFIG_AXP_ELDO2_VOLT=0
CONFIG_AXP_ELDO3_VOLT=0
# CONFIG_DM_PWM is not set
# CONFIG_RAM is not set
#
# Remote Processor drivers
#
#
# Reset Controller Support
#
# CONFIG_DM_RESET is not set
#
# Real Time Clock
#
# CONFIG_DM_RTC is not set
#
# Serial drivers
#
CONFIG_REQUIRE_SERIAL_CONSOLE=y
CONFIG_SERIAL_PRESENT=y
CONFIG_SPL_SERIAL_PRESENT=y
# CONFIG_DEBUG_UART is not set
# CONFIG_DEBUG_UART_SKIP_INIT is not set
# CONFIG_ALTERA_JTAG_UART is not set
# CONFIG_ALTERA_UART is not set
# CONFIG_FSL_LPUART is not set
CONFIG_SYS_NS16550=y
# CONFIG_MSM_SERIAL is not set
#
# Sound support
#
# CONFIG_SOUND is not set
#
# SPI Support
#
# CONFIG_DM_SPI is not set
# CONFIG_FSL_ESPI is not set
# CONFIG_TI_QSPI is not set
#
# SPMI support
#
# CONFIG_SPMI is not set
#
# System reset device drivers
#
# CONFIG_SYSRESET is not set
# CONFIG_DM_THERMAL is not set
#
# Timer Support
#
# CONFIG_TIMER is not set
#
# TPM support
#
CONFIG_USB=y
CONFIG_DM_USB=y
#
# USB Host Controller Drivers
#
# CONFIG_USB_XHCI_HCD is not set
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_EHCI is not set
# CONFIG_USB_OHCI_HCD is not set
# CONFIG_USB_UHCI_HCD is not set
#
# MUSB Controller Driver
#
CONFIG_USB_MUSB_HOST=y
# CONFIG_USB_MUSB_GADGET is not set
CONFIG_USB_MUSB_SUNXI=y
#
# ULPI drivers
#
#
# USB peripherals
#
CONFIG_USB_STORAGE=y
CONFIG_USB_KEYBOARD=y
# CONFIG_USB_GADGET is not set
#
# Graphics support
#
CONFIG_DM_VIDEO=y
CONFIG_VIDEO_BPP8=y
CONFIG_VIDEO_BPP16=y
CONFIG_VIDEO_BPP32=y
CONFIG_CONSOLE_NORMAL=y
# CONFIG_CONSOLE_ROTATION is not set
# CONFIG_CONSOLE_TRUETYPE is not set
#
# TrueType Fonts
#
# CONFIG_VIDCONSOLE_AS_LCD is not set
# CONFIG_VIDEO_VESA is not set
# CONFIG_VIDEO_LCD_ANX9804 is not set
# CONFIG_VIDEO_LCD_SSD2828 is not set
# CONFIG_VIDEO_LCD_HITACHI_TX18D42VM is not set
# CONFIG_VIDEO_MVEBU is not set
# CONFIG_DISPLAY is not set
# CONFIG_VIDEO_ROCKCHIP is not set
# CONFIG_VIDEO_TEGRA20 is not set
# CONFIG_VIDEO_TEGRA124 is not set
# CONFIG_VIDEO_BRIDGE is not set
# CONFIG_PHYS_TO_BUS is not set
#
# File systems
#
#
# Library routines
#
# CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED is not set
CONFIG_HAVE_PRIVATE_LIBGCC=y
CONFIG_USE_PRIVATE_LIBGCC=y
CONFIG_SYS_HZ=1000
CONFIG_USE_TINY_PRINTF=y
CONFIG_REGEX=y
# CONFIG_LIB_RAND is not set
# CONFIG_CMD_DHRYSTONE is not set
# CONFIG_RSA is not set
# CONFIG_TPM is not set
#
# Hashing Support
#
# CONFIG_SHA1 is not set
# CONFIG_SHA256 is not set
# CONFIG_SHA_HW_ACCEL is not set
#
# Compression Support
#
# CONFIG_LZ4 is not set
# CONFIG_ERRNO_STR is not set
CONFIG_OF_LIBFDT=y
# CONFIG_OF_LIBFDT_OVERLAY is not set
# CONFIG_SPL_OF_LIBFDT is not set
CONFIG_EFI_LOADER=y
# CONFIG_UNIT_TEST is not set
-------------- next part --------------
[product]
version = "100"
machine = "evb"
[platform]
eraseflag = 1
next_work = 3
boot0 = 12
[target]
boot_clock = 1008
storage_type = 0
boot0 = 3000
boot1_ddr = 0
boot1_free = 0
[key_detect_en]
keyen_flag = 1
[power_sply]
dcdc1_vol = 3000
dcdc2_vol = 1100
dcdc3_vol = 1200
dcdc4_vol = 0
dcdc5_vol = 1500
aldo2_vol = 2500
aldo3_vol = 3000
[card_boot]
logical_start = 40960
sprite_gpio0 =
next_work = 3
[card0_boot_para]
card_ctrl = 0
card_high_speed = 1
card_line = 4
sdc_d1 = port:PF00<2><1><2><default>
sdc_d0 = port:PF01<2><1><2><default>
sdc_clk = port:PF02<2><1><2><default>
sdc_cmd = port:PF03<2><1><2><default>
sdc_d3 = port:PF04<2><1><2><default>
sdc_d2 = port:PF05<2><1><2><default>
[card2_boot_para]
card_ctrl = 2
card_high_speed = 1
card_line = 4
sdc_2xmode = 1
sdc_clk = port:PC05<3><1><2><default>
sdc_cmd = port:PC06<3><1><2><default>
sdc_d0 = port:PC08<3><1><2><default>
sdc_d1 = port:PC09<3><1><2><default>
sdc_d2 = port:PC10<3><1><2><default>
sdc_d3 = port:PC11<3><1><2><default>
[twi_para]
twi_port = 0
twi_scl = port:PH02<2><default><default><default>
twi_sda = port:PH03<2><default><default><default>
[uart_para]
uart_debug_port = 0
uart_debug_tx = port:PF02<3><1><default><default>
uart_debug_rx = port:PF04<3><1><default><default>
[force_uart_para]
force_uart_port = 0
force_uart_tx = port:PF02<3><1><default><default>
force_uart_rx = port:PF04<3><1><default><default>
[jtag_para]
jtag_enable = 1
jtag_ms = port:PF00<3><default><default><default>
jtag_ck = port:PF05<3><default><default><default>
jtag_do = port:PF03<3><default><default><default>
jtag_di = port:PF01<3><default><default><default>
[clock]
pll3 = 297
pll4 = 300
pll6 = 600
pll8 = 408
pll9 = 480
pll10 = 297
pll_cpupat = 0
pll_gpupat = -1002379674
pll_videopat = 0
pll_vepat = 0
pll_hsicpat = 0
pll_depat = 0
pll_mipipat = 0
[pm_para]
standby_mode = 1
[dram_para]
dram_clk = 360
dram_type = 3
dram_zq = 0x3bbb
dram_odt_en = 1
dram_para1 = 284295680
dram_para2 = 16
dram_mr0 = 7280
dram_mr1 = 64
dram_mr2 = 24
dram_mr3 = 0
dram_tpr0 = 0x44a0c9
dram_tpr1 = 0x1c218c7
dram_tpr2 = 0x3f02b
dram_tpr3 = 0x0
dram_tpr4 = 0x0
dram_tpr5 = 0x0
dram_tpr6 = 0x0
dram_tpr7 = 0x0
dram_tpr8 = 0x0
dram_tpr9 = 0x0
dram_tpr10 = 0x0
dram_tpr11 = 0x0
dram_tpr12 = 0xa8
dram_tpr13 = 0x10901
[pm_para]
standby_mode = 1
[wakeup_src_para]
cpu_en = 0
cpu_freq = 48
pll_ratio = 273
dram_selfresh_en = 1
dram_freq = 36
wakeup_src_wl = port:PL07<4><default><default><0>
wakeup_src_bt = port:PL09<4><default><default><0>
[twi0]
twi_used = 1
twi_scl = port:PH02<2><default><default><default>
twi_sda = port:PH03<2><default><default><default>
[twi1]
twi_used = 1
twi_scl = port:PH04<2><default><default><default>
twi_sda = port:PH05<2><default><default><default>
[twi2]
twi_used = 1
twi_scl = port:PE12<3><default><default><default>
twi_sda = port:PE13<3><default><default><default>
[uart0]
uart_used = 1
uart_port = 0
uart_type = 2
uart_tx = port:PF02<3><1><default><default>
uart_rx = port:PF04<3><1><default><default>
[uart1]
uart_used = 1
uart_type = 4
uart_tx = port:PG06<2><1><default><default>
uart_rx = port:PG07<2><1><default><default>
uart_rts = port:PG08<2><1><default><default>
uart_cts = port:PG09<2><2><default><default>
[uart2]
uart_used = 0
uart_type = 4
uart_tx = port:PB00<2><1><default><default>
uart_rx = port:PB01<2><1><default><default>
uart_rts = port:PB02<2><1><default><default>
uart_cts = port:PB03<2><1><default><default>
[uart3]
uart_used = 0
uart_type = 4
uart_tx = port:PH06<3><1><default><default>
uart_rx = port:PH07<3><1><default><default>
uart_rts = port:PH08<3><1><default><default>
uart_cts = port:PH09<3><1><default><default>
[uart4]
uart_used = 0
uart_port = 4
uart_type = 2
uart_tx = port:PA04<2><1><default><default>
uart_rx = port:PA05<2><1><default><default>
uart_rts = port:PA06<2><1><default><default>
uart_cts = port:PA07<2><1><default><default>
[spi0]
spi_used = 0
spi_cs_bitmap = 1
spi_mosi = port:PC00<3><default><default><default>
spi_miso = port:PC01<3><default><default><default>
spi_sclk = port:PC02<3><default><default><default>
spi_cs0 = port:PC03<3><1><default><default>
[spi1]
spi_used = 0
spi_cs_bitmap = 1
spi_cs0 = port:PA00<2><1><default><default>
spi_sclk = port:PA01<2><default><default><default>
spi_mosi = port:PA02<2><default><default><default>
spi_miso = port:PA03<2><default><default><default>
[spi_devices]
spi_dev_num = 1
[spi_board0]
modalias = "at25df641"
max_speed_hz = 50000000
bus_num = 0
chip_select = 0
mode = 0
[ctp_para]
ctp_used = 1
ctp_name = "gsl1680_d702"
ctp_twi_id = 0
ctp_twi_addr = 0x40
ctp_screen_max_x = 800
ctp_screen_max_y = 480
ctp_revert_x_flag = 1
ctp_revert_y_flag = 1
ctp_exchange_x_y_flag = 1
ctp_int_port = port:PB05<4><default><default><default>
ctp_wakeup = port:PH01<1><default><default><1>
ctp_light = port:PL10<1><default><default><1>
ctp_power_ldo = "axp22_eldo1"
ctp_power_ldo_vol = 3000
ctp_power_io =
[ctp_list_para]
ctp_det_used = 1
ft5x_ts = 0
gt82x = 0
gslX680 = 0
tc1126 = 1
gslX680new = 1
gt9xx_ts = 0
gt9xxf_ts = 0
tu_ts = 0
gt818_ts = 0
zet622x = 0
aw5306_ts = 0
icn83xx_ts = 0
[tkey_para]
tkey_used = 0
tkey_twi_id =
tkey_twi_addr =
tkey_int =
[motor_para]
motor_used = 0
motor_shake = port:power3<1><default><default><1>
motor_ldo = ""
motor_ldo_voltage = 3300
[ths_para]
ths_used = 1
ths_trip1_count = 3
ths_trip1_0 = 75
ths_trip1_1 = 90
ths_trip1_2 = 110
ths_trip1_0_min = 0
ths_trip1_0_max = 1
ths_trip1_1_min = 1
ths_trip1_1_max = 3
ths_trip1_2_min = 0
ths_trip1_2_max = 0
[cooler_table]
cooler_count = 4
cooler0 = "1344000 4 4294967295 0"
cooler1 = "1200000 4 4294967295 0"
cooler2 = "1008000 4 4294967295 0"
cooler3 = "648000 4 4294967295 0"
[nand0_para]
nand_support_2ch = 0
nand0_used = 1
nand0_we = port:PC00<2><default><2><default>
nand0_ale = port:PC01<2><default><2><default>
nand0_cle = port:PC02<2><default><2><default>
nand0_ce1 = port:PC03<2><default><2><default>
nand0_ce0 = port:PC04<2><default><2><default>
nand0_nre = port:PC05<2><default><2><default>
nand0_rb0 = port:PC06<2><default><2><default>
nand0_rb1 = port:PC07<2><default><2><default>
nand0_d0 = port:PC08<2><default><2><default>
nand0_d1 = port:PC09<2><default><2><default>
nand0_d2 = port:PC10<2><default><2><default>
nand0_d3 = port:PC11<2><default><2><default>
nand0_d4 = port:PC12<2><default><2><default>
nand0_d5 = port:PC13<2><default><2><default>
nand0_d6 = port:PC14<2><default><2><default>
nand0_d7 = port:PC15<2><default><2><default>
nand0_ndqs = port:PC16<2><default><2><default>
nand0_ce2 = port:PC17<2><default><2><default>
nand0_ce3 = port:PC18<2><default><2><default>
[disp_init]
disp_init_enable = 1
disp_mode = 0
screen0_output_type = 1
screen0_output_mode = 4
screen1_output_type = 1
screen1_output_mode = 4
fb0_format = 10
fb0_pixel_sequence = 0
fb0_scaler_mode_enable = 0
fb0_width = 0
fb0_height = 0
fb1_format = 10
fb1_pixel_sequence = 0
fb1_scaler_mode_enable = 0
fb1_width = 0
fb1_height = 0
lcd0_backlight = 197
lcd1_backlight = 197
lcd0_bright = 50
lcd0_contrast = 50
lcd0_saturation = 57
lcd0_hue = 50
lcd1_bright = 50
lcd1_contrast = 50
lcd1_saturation = 57
lcd1_hue = 50
[lcd0_para]
lcd_used = 1
lcd_driver_name = "default_lcd"
lcd_if = 0
lcd_x = 1024
lcd_y = 600
lcd_width = 197
lcd_height = 114
lcd_dclk_freq = 50
lcd_pwm_used = 1
lcd_pwm_ch = 0
lcd_pwm_freq = 50000
lcd_pwm_pol = 1
lcd_hbp = 160
lcd_ht = 1344
lcd_hspw = 20
lcd_vbp = 23
lcd_vt = 635
lcd_vspw = 3
lcd_lvds_if = 0
lcd_dsi_lane = 4
lcd_dsi_format = 2
lcd_dsi_eotp = 0
lcd_dsi_vc = 0
lcd_dsi_te = 0
lcd_frm = 1
lcd_gamma_en = 0
lcd_bright_curve_en = 0
lcd_cmap_en = 0
deu_mode = 0
lcdgamma4iep = 22
smart_color = 90
lcd_gpio_0 = port:PH07<1><0><default><1>
lcd_bl_en = port:PH06<1><0><default><1>
lcd_power = port:power2<1><0><default><1>
lcdd0 = port:PD00<2><0><default><default>
lcdd1 = port:PD01<2><0><default><default>
lcdd2 = port:PD02<2><0><default><default>
lcdd3 = port:PD03<2><0><default><default>
lcdd4 = port:PD04<2><0><default><default>
lcdd5 = port:PD05<2><0><default><default>
lcdd6 = port:PD06<2><0><default><default>
lcdd7 = port:PD07<2><0><default><default>
lcdd8 = port:PD08<2><0><default><default>
lcdd9 = port:PD09<2><0><default><default>
lcdd10 = port:PD10<2><0><default><default>
lcdd11 = port:PD11<2><0><default><default>
lcdd12 = port:PD12<2><0><default><default>
lcdd13 = port:PD13<2><0><default><default>
lcdd14 = port:PD14<2><0><default><default>
lcdd15 = port:PD15<2><0><default><default>
lcdd16 = port:PD16<2><0><default><default>
lcdd17 = port:PD17<2><0><default><default>
lcdd18 = port:PD18<2><0><default><default>
lcdd19 = port:PD19<2><0><default><default>
lcdd20 = port:PD20<2><0><default><default>
lcdd21 = port:PD21<2><0><default><default>
lcdd22 = port:PD22<2><0><default><default>
lcdd23 = port:PD23<2><0><default><default>
lcdclk = port:PD24<2><0><default><default>
lcdde = port:PD25<2><0><default><default>
lcdhsync = port:PD26<2><0><default><default>
lcdvsync = port:PD27<2><0><default><default>
[pwm0_para]
pwm_used = 1
pwm_positive = port:PH00<2><0><default><default>
[pwm1_para]
pwm_used = 0
pwm_positive = port:PH01<2><0><default><default>
[csi0]
vip_used = 1
vip_mode = 0
vip_dev_qty = 2
vip_define_sensor_list = 0
vip_csi_pck = port:PE00<2><default><default><default>
vip_csi_mck = port:PE01<2><default><default><default>
vip_csi_hsync = port:PE02<2><default><default><default>
vip_csi_vsync = port:PE03<2><default><default><default>
vip_csi_d0 = port:PE04<2><default><default><default>
vip_csi_d1 = port:PE05<2><default><default><default>
vip_csi_d2 = port:PE06<2><default><default><default>
vip_csi_d3 = port:PE07<2><default><default><default>
vip_csi_d4 = port:PE08<2><default><default><default>
vip_csi_d5 = port:PE09<2><default><default><default>
vip_csi_d6 = port:PE10<2><default><default><default>
vip_csi_d7 = port:PE11<2><default><default><default>
vip_dev0_mname = "gc0309"
vip_dev0_pos = "rear"
vip_dev0_lane = 1
vip_dev0_twi_id = 2
vip_dev0_twi_addr = 66
vip_dev0_isp_used = 0
vip_dev0_fmt = 0
vip_dev0_stby_mode = 0
vip_dev0_vflip = 0
vip_dev0_hflip = 0
vip_dev0_iovdd = "axp22_dldo3"
vip_dev0_iovdd_vol = 2800000
vip_dev0_avdd = "axp22_ldoio0"
vip_dev0_avdd_vol = 2800000
vip_dev0_dvdd = "axp22_eldo2"
vip_dev0_dvdd_vol = 1800000
vip_dev0_afvdd = ""
vip_dev0_afvdd_vol = 2800000
vip_dev0_power_en =
vip_dev0_reset = port:PE14<1><default><default><0>
vip_dev0_pwdn = port:PE17<1><default><default><1>
vip_dev0_flash_en = port:PB07<1><default><default><0>
vip_dev0_flash_mode =
vip_dev0_af_pwdn =
vip_dev1_mname = "gc0309"
vip_dev1_pos = "front"
vip_dev1_lane = 1
vip_dev1_twi_id = 2
vip_dev1_twi_addr = 66
vip_dev1_isp_used = 0
vip_dev1_fmt = 0
vip_dev1_stby_mode = 0
vip_dev1_vflip = 0
vip_dev1_hflip = 0
vip_dev1_iovdd = "axp22_dldo3"
vip_dev1_iovdd_vol = 2800000
vip_dev1_avdd = "axp22_ldoio0"
vip_dev1_avdd_vol = 2800000
vip_dev1_dvdd = "axp22_eldo2"
vip_dev1_dvdd_vol = 1800000
vip_dev1_afvdd = ""
vip_dev1_afvdd_vol = 2800000
vip_dev1_power_en =
vip_dev1_reset = port:PE14<1><default><default><0>
vip_dev1_pwdn = port:PE15<1><default><default><1>
vip_dev1_flash_en =
vip_dev1_flash_mode =
vip_dev1_af_pwdn =
[mmc0_para]
sdc_used = 1
sdc_detmode = 2
sdc_buswidth = 4
sdc_d1 = port:PF00<2><1><2><default>
sdc_d0 = port:PF01<2><1><2><default>
sdc_clk = port:PF02<2><1><2><default>
sdc_cmd = port:PF03<2><1><2><default>
sdc_d3 = port:PF04<2><1><2><default>
sdc_d2 = port:PF05<2><1><2><default>
sdc_det = port:PB04<4><1><2><default>
sdc_use_wp = 0
sdc_wp =
sdc_isio = 0
sdc_regulator = "none"
[mmc1_para]
sdc_used = 1
sdc_detmode = 4
sdc_buswidth = 4
sdc_clk = port:PG00<2><1><1><default>
sdc_cmd = port:PG01<2><1><1><default>
sdc_d0 = port:PG02<2><1><1><default>
sdc_d1 = port:PG03<2><1><1><default>
sdc_d2 = port:PG04<2><1><1><default>
sdc_d3 = port:PG05<2><1><1><default>
sdc_det =
sdc_use_wp = 0
sdc_wp =
sdc_isio = 1
sdc_regulator = "none"
[mmc2_para]
sdc_used = 0
sdc_detmode = 3
sdc_buswidth = 8
sdc_2xmode = 1
sdc_clk = port:PC05<3><1><2><default>
sdc_cmd = port:PC06<3><1><2><default>
sdc_d0 = port:PC08<3><1><2><default>
sdc_d1 = port:PC09<3><1><2><default>
sdc_d2 = port:PC10<3><1><2><default>
sdc_d3 = port:PC11<3><1><2><default>
sdc_d4 = port:PC12<3><1><2><default>
sdc_d5 = port:PC13<3><1><2><default>
sdc_d6 = port:PC14<3><1><2><default>
sdc_d7 = port:PC15<3><1><2><default>
emmc_rst = port:PC16<3><1><2><default>
sdc_power_supply = "axp22_dcdc1"
sdc_det =
sdc_use_wp = 0
sdc_wp =
sdc_isio = 0
sdc_regulator = "none"
[usbc0]
usb_used = 1
usb_port_type = 2
usb_detect_type = 1
usb_id_gpio = port:PH08<0><1><default><default>
usb_det_vbus_gpio = "axp_ctrl"
usb_drv_vbus_gpio = port:power4<1><0><default><0>
usb_restrict_gpio =
usb_host_init_state = 0
usb_restric_flag = 0
usb_restric_voltage = 3550000
usb_restric_capacity = 5
usb_regulator_io = "nocare"
usb_regulator_vol = 0
usb_regulator_id_vbus = "axp22_dcdc1"
usb_regulator_id_vbus_vol = 3000000
[usbc1]
usb_used = 1
usb_drv_vbus_gpio =
usb_restrict_gpio =
usb_host_init_state = 0
usb_restric_flag = 0
usb_regulator_io = "nocare"
usb_regulator_vol = 0
usb_not_suspend = 0
[usb_feature]
vendor_id = 7994
mass_storage_id = 4096
adb_id = 4097
manufacturer_name = "USB Developer"
product_name = "Android"
serial_number = "20080411"
[msc_feature]
vendor_name = "USB 2.0"
product_name = "USB Flash Driver"
release = 100
luns = 2
[serial_feature]
serial_unique = 1
[gsensor_para]
gsensor_used = 1
gsensor_twi_id = 1
gsensor_twi_addr = 0x18
gsensor_int1 = port:PB06<4><1><default><default>
gsensor_int2 =
[gsensor_list_para]
gsensor_det_used = 1
bma250 = 0
stk831x = 1
mma8452 = 0
mma7660 = 0
mma865x = 0
mc32x0 = 1
gma30x = 1
afa750 = 0
lis3de_acc = 0
lis3dh_acc = 0
kxtik = 0
dmard10 = 0
dmard09 = 1
mxc622x = 0
fxos8700 = 0
lsm303d = 0
[gps_para]
[i2c_gpio_para]
[wifi_para]
wifi_used = 1
wifi_sdc_id = 1
wifi_usbc_id = 1
wifi_usbc_type = 1
wifi_mod_sel = 7
wifi_power = "axp22_dldo1"
wifi_power_ext1 = "axp22_dldo2"
wifi_power_ext2 = ""
rda5990_wl_host_wake = port:PL07<4><default><default><0>
rda5990_bt_host_wake = port:PL06<4><default><default><0>
rda5990_lpo_use_apclk = 1
[bt_para]
bt_used = 1
bt_uart_id = 1
[3g_para]
3g_used = 0
3g_usbc_num = 1
3g_uart_num = 2
bb_name = ""
bb_vbat =
bb_on =
bb_pwr_on = port:PL03<1><default><default><0>
bb_wake = port:PL04<1><default><default><0>
bb_rf_dis = port:PL11<1><default><default><0>
bb_rst = port:PL05<1><default><default><0>
bb_dldo = "axp22_aldo1"
bb_dldo_min_uV = 2800000
bb_dldo_max_uV = 2800000
[gy_para]
gy_used = 0
gy_twi_id = 1
gy_twi_addr = 106
gy_int1 =
gy_int2 =
[gy_list_para]
gy_det_used = 0
l3gd20_gyr = 1
[ls_para]
ls_used = 0
ls_twi_id = 1
ls_twi_addr = 35
ls_int = port:PB07<4><1><default><default>
[ls_list_para]
ls_det_used = 0
ltr_501als = 1
jsa1212 = 1
[compass_para]
compass_used = 0
compass_twi_id = 1
compass_twi_addr = 13
compass_int =
[i2s0]
i2s0_used = 0
i2s0_channel = 2
i2s0_master = 4
i2s0_select = 1
audio_format = 1
signal_inversion = 1
over_sample_rate = 512
sample_resolution = 16
word_select_size = 32
pcm_sync_period = 256
msb_lsb_first = 0
sign_extend = 0
slot_index = 0
slot_width = 16
frame_width = 1
tx_data_mode = 1
rx_data_mode = 1
i2s0_mclk =
i2s0_bclk = port:PB04<2><1><default><default>
i2s0_lrclk = port:PB05<2><1><default><default>
i2s0_dout0 = port:PB06<2><1><default><default>
i2s0_dout1 =
i2s0_dout2 =
i2s0_dout3 =
i2s0_din = port:PB07<2><1><default><default>
[i2s1]
i2s1_used = 0
i2s1_channel = 2
i2s1_master = 4
i2s1_select = 1
audio_format = 1
signal_inversion = 1
over_sample_rate = 512
sample_resolution = 16
word_select_size = 32
pcm_sync_period = 64
msb_lsb_first = 0
sign_extend = 0
slot_index = 0
slot_width = 16
frame_width = 1
tx_data_mode = 0
rx_data_mode = 0
i2s1_mclk =
i2s1_bclk = port:PG11<2><1><default><default>
i2s1_lrclk = port:PG10<2><1><default><default>
i2s1_dout = port:PG12<2><1><default><default>
i2s1_din = port:PG13<2><1><default><default>
[audio0]
audio_used = 1
audio_hp_ldo = "none"
headphone_vol = 59
earpiece_vol = 62
cap_vol = 5
pa_single_vol = 50
pa_double_used = 0
pa_double_vol = 62
headphone_direct_used = 1
headset_mic_vol = 3
main_mic_vol = 1
audio_pa_ctrl = port:PH09<1><default><default><0>
aif2_used = 0
aif3_used = 0
headphone_mute_used = 0
DAC_VOL_CTRL_SPK = 39064
DAC_VOL_CTRL_HEADPHONE = 41120
agc_used = 0
drc_used = 0
[pmu1_para]
pmu_used = 1
pmu_twi_addr = 52
pmu_twi_id = 1
pmu_irq_id = 0
pmu_battery_rdc = 100
pmu_battery_cap = 4000
pmu_batdeten = 1
pmu_chg_ic_temp = 0
pmu_runtime_chgcur = 300
pmu_earlysuspend_chgcur = 1200
pmu_suspend_chgcur = 1200
pmu_shutdown_chgcur = 1200
pmu_init_chgvol = 4200
pmu_init_chgend_rate = 15
pmu_init_chg_enabled = 1
pmu_init_adc_freq = 800
pmu_init_adcts_freq = 800
pmu_init_chg_pretime = 70
pmu_init_chg_csttime = 720
pmu_batt_cap_correct = 1
pmu_bat_regu_en = 1
pmu_bat_para1 = 0
pmu_bat_para2 = 0
pmu_bat_para3 = 0
pmu_bat_para4 = 0
pmu_bat_para5 = 0
pmu_bat_para6 = 0
pmu_bat_para7 = 0
pmu_bat_para8 = 0
pmu_bat_para9 = 1
pmu_bat_para10 = 2
pmu_bat_para11 = 3
pmu_bat_para12 = 5
pmu_bat_para13 = 10
pmu_bat_para14 = 16
pmu_bat_para15 = 31
pmu_bat_para16 = 43
pmu_bat_para17 = 49
pmu_bat_para18 = 53
pmu_bat_para19 = 57
pmu_bat_para20 = 60
pmu_bat_para21 = 63
pmu_bat_para22 = 66
pmu_bat_para23 = 71
pmu_bat_para24 = 77
pmu_bat_para25 = 80
pmu_bat_para26 = 84
pmu_bat_para27 = 88
pmu_bat_para28 = 92
pmu_bat_para29 = 94
pmu_bat_para30 = 96
pmu_bat_para31 = 98
pmu_bat_para32 = 100
pmu_usbvol_limit = 0
pmu_usbcur_limit = 0
pmu_usbvol = 4000
pmu_usbcur = 0
pmu_usbvol_pc = 4400
pmu_usbcur_pc = 500
pmu_pwroff_vol = 3300
pmu_pwron_vol = 2600
pmu_pekoff_time = 6000
pmu_pekoff_func = 0
pmu_pekoff_en = 1
pmu_peklong_time = 1500
pmu_pekon_time = 1000
pmu_pwrok_time = 64
pmu_battery_warning_level1 = 15
pmu_battery_warning_level2 = 0
pmu_restvol_adjust_time = 60
pmu_ocv_cou_adjust_time = 60
pmu_chgled_func = 1
pmu_chgled_type = 0
pmu_vbusen_func = 1
pmu_reset = 0
pmu_IRQ_wakeup = 0
pmu_hot_shutdowm = 1
pmu_inshort = 0
power_start = 0
pmu_temp_enable = 0
pmu_charge_ltf = 2261
pmu_charge_htf = 388
pmu_discharge_ltf = 3200
pmu_discharge_htf = 237
pmu_temp_para1 = 7466
pmu_temp_para2 = 4480
pmu_temp_para3 = 3518
pmu_temp_para4 = 2786
pmu_temp_para5 = 2223
pmu_temp_para6 = 1788
pmu_temp_para7 = 1448
pmu_temp_para8 = 969
pmu_temp_para9 = 664
pmu_temp_para10 = 466
pmu_temp_para11 = 393
pmu_temp_para12 = 333
pmu_temp_para13 = 283
pmu_temp_para14 = 242
pmu_temp_para15 = 179
pmu_temp_para16 = 134
[pmu2_para]
pmu_used = 0
pmu_twi_addr = 52
pmu_twi_id = 1
pmu_irq_id = 0
[recovery_key]
key_min = 3
key_max = 5
[dvfs_table]
extremity_freq = 1344000000
max_freq = 1200000000
min_freq = 120000000
LV_count = 8
LV1_freq = 1536000000
LV1_volt = 1500
LV2_freq = 1344000000
LV2_volt = 1460
LV3_freq = 1200000000
LV3_volt = 1320
LV4_freq = 1008000000
LV4_volt = 1200
LV5_freq = 816000000
LV5_volt = 1100
LV6_freq = 648000000
LV6_volt = 1040
LV7_freq = 0
LV7_volt = 1040
LV8_freq = 0
LV8_volt = 1040
[Vdevice]
Vdevice_used = 1
Vdevice_0 = port:PA01<5><1><2><default>
Vdevice_1 = port:PA02<5><1><2><default>
[s_uart0]
s_uart_used = 0
s_uart_tx = port:PL02<2><default><default><default>
s_uart_rx = port:PL03<2><default><default><default>
[s_rsb0]
s_rsb_used = 1
s_rsb_sck = port:PL00<2><1><2><default>
s_rsb_sda = port:PL01<2><1><2><default>
[s_jtag0]
s_jtag_used = 0
s_jtag_tms = port:PL04<2><1><2><default>
s_jtag_tck = port:PL05<2><1><2><default>
s_jtag_tdo = port:PL06<2><1><2><default>
s_jtag_tdi = port:PL07<2><1><2><default>
[s_powchk]
s_powchk_used = -2147483648
s_power_reg = 32865
s_system_power = 50
[mali_para]
mali_used = 1
mali_clkdiv = 1
mali_extreme_freq = 408
mali_extreme_vol = 1100
[dram_dvfs_table]
LV_count = 3
LV1_freq = 552000000
LV1_volt = 1100
LV2_freq = 360000000
LV2_volt = 1100
LV3_freq = 0
LV3_volt = 1100
[charging_type]
charging_type = 1
[dram_scene_table]
LV_count = 3
LV1_scene = 1
LV1_freq = 360000000
LV2_scene = 2
LV2_freq = 240000000
LV3_scene = 3
LV3_freq = 168000000
leds_used = 0
red_led = port:power3<1><default><default><0>
red_led_active_low = 1
green_led = port:power1<1><default><default><0>
green_led_active_low = 0
blue_led =
blue_led_active_low = 0
More information about the U-Boot
mailing list