[U-Boot] [PATCH v2 3/4] board: sama5d2_xplained: Set 'ethaddr' got from AT24MAC

Wenyou Yang wenyou.yang at atmel.com
Tue Sep 13 04:49:04 CEST 2016


If 'ethaddr' is not set, we will get the ethernet address from AT24MAC,
and set it to 'ethaddr' variable.

Signed-off-by: Wenyou Yang <wenyou.yang at atmel.com>
Signed-off-by: Songjun Wu <songjun.wu at microchip.com>
---

Changes in v2: None

 board/atmel/sama5d2_xplained/sama5d2_xplained.c | 51 +++++++++++++++++++++++++
 include/configs/sama5d2_xplained.h              |  6 +++
 2 files changed, 57 insertions(+)

diff --git a/board/atmel/sama5d2_xplained/sama5d2_xplained.c b/board/atmel/sama5d2_xplained/sama5d2_xplained.c
index 7ccadf2..c94574b 100644
--- a/board/atmel/sama5d2_xplained/sama5d2_xplained.c
+++ b/board/atmel/sama5d2_xplained/sama5d2_xplained.c
@@ -7,6 +7,8 @@
 
 #include <common.h>
 #include <atmel_hlcdc.h>
+#include <dm.h>
+#include <i2c.h>
 #include <lcd.h>
 #include <mmc.h>
 #include <net.h>
@@ -192,6 +194,55 @@ int board_eth_init(bd_t *bis)
 	return rc;
 }
 
+#ifdef CONFIG_CMD_I2C
+static int set_ethaddr_from_eeprom(void)
+{
+	const int ETH_ADDR_LEN = 6;
+	unsigned char ethaddr[ETH_ADDR_LEN];
+	const char *ETHADDR_NAME = "ethaddr";
+	struct udevice *bus, *dev;
+
+	if (getenv(ETHADDR_NAME))
+		return 0;
+
+	if (uclass_get_device_by_seq(UCLASS_I2C, 1, &bus)) {
+		printf("Cannot find I2C bus 1\n");
+		return -1;
+	}
+
+	if (dm_i2c_probe(bus, CONFIG_AT24MAC_ADDR, 0, &dev)) {
+		printf("Failed to probe I2C chip\n");
+		return -1;
+	}
+
+	if (dm_i2c_read(dev, CONFIG_AT24MAC_REG, ethaddr, ETH_ADDR_LEN)) {
+		printf("Failed to read ethernet address from EEPROM\n");
+		return -1;
+	}
+
+	if (!is_valid_ethaddr(ethaddr)) {
+		printf("The ethernet address read from EEPROM is not valid!\n");
+		return -1;
+	}
+
+	return eth_setenv_enetaddr(ETHADDR_NAME, ethaddr);
+}
+#else
+static int set_ethaddr_from_eeprom(void)
+{
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_MISC_INIT_R
+int misc_init_r(void)
+{
+	set_ethaddr_from_eeprom();
+
+	return 0;
+}
+#endif
+
 /* SPL */
 #ifdef CONFIG_SPL_BUILD
 void spl_board_init(void)
diff --git a/include/configs/sama5d2_xplained.h b/include/configs/sama5d2_xplained.h
index 77757a3..cada04f 100644
--- a/include/configs/sama5d2_xplained.h
+++ b/include/configs/sama5d2_xplained.h
@@ -15,6 +15,8 @@
 
 #include "at91-sama5_common.h"
 
+#define CONFIG_MISC_INIT_R
+
 /* SDRAM */
 #define CONFIG_NR_DRAM_BANKS		1
 #define CONFIG_SYS_SDRAM_BASE           ATMEL_BASE_DDRCS
@@ -54,6 +56,10 @@
 #define CONFIG_DOS_PARTITION
 #endif
 
+/* I2C */
+#define CONFIG_AT24MAC_ADDR		0x5c
+#define CONFIG_AT24MAC_REG		0x9a
+
 /* Ethernet Hardware */
 #define CONFIG_MACB
 #define CONFIG_RMII
-- 
2.7.4



More information about the U-Boot mailing list