[U-Boot] [PATCH 12/21] ARM: tegra: pull Tegra124 SoC DT from Linux v4.7
Stephen Warren
swarren at wwwdotorg.org
Tue Sep 13 18:45:53 CEST 2016
From: Stephen Warren <swarren at nvidia.com>
The primary benefit of this change is that it adds all missing clocks and
resets properties to peripherals. This will allow peripheral drivers to
migrate to the standard clock and reset APIs in the future.
Main changes:
* USB phy_type property is aligned with the kernel, so board files are
updated so the final DT content doesn't change. I'm not convinved that
Nyan uses HSIC phy_type. However, I'd rather this change be a no-op,
and any DT bug-fixes be separate.
* Sync misc changes from the kernel: missing DT content, minor compatible
value fixes, typos.
Remaining deltas relative to the Linux DT:
* U-Boot uses #address-cells/#size-cells of 1 whereas the kernel uses 2.
I believe U-Boot's DT parsing currently assumes that these values match
the physical address size, so I didn't synchronize this part of the DT.
* U-Boot uses the original XUSB PHY DT binding, wherease the kernel DT
has moved to a newer version. Thus, XUSB client nodes include properties
names phys and phy-names that do not appear in the kernel, and don't
include pad definitions in the padctl node.
Signed-off-by: Stephen Warren <swarren at nvidia.com>
---
arch/arm/dts/tegra124-nyan.dtsi | 2 +
arch/arm/dts/tegra124.dtsi | 59 ++++++++++++++++++++++---
include/dt-bindings/thermal/tegra124-soctherm.h | 1 +
3 files changed, 55 insertions(+), 7 deletions(-)
diff --git a/arch/arm/dts/tegra124-nyan.dtsi b/arch/arm/dts/tegra124-nyan.dtsi
index 780131f7361c..51895e4816c4 100644
--- a/arch/arm/dts/tegra124-nyan.dtsi
+++ b/arch/arm/dts/tegra124-nyan.dtsi
@@ -424,10 +424,12 @@
usb at 7d004000 { /* Internal webcam. */
status = "okay";
+ phy_type = "hsic";
};
usb-phy at 7d004000 {
status = "okay";
+ phy_type = "hsic";
vbus-supply = <&vdd_run_cam>;
};
diff --git a/arch/arm/dts/tegra124.dtsi b/arch/arm/dts/tegra124.dtsi
index 275a509f753e..83d63480471b 100644
--- a/arch/arm/dts/tegra124.dtsi
+++ b/arch/arm/dts/tegra124.dtsi
@@ -196,13 +196,18 @@
lic: interrupt-controller at 60004000 {
compatible = "nvidia,tegra124-ictlr", "nvidia,tegra30-ictlr";
+ reg = <0x0 0x60004000 0x0 0x100>,
+ <0x0 0x60004100 0x0 0x100>,
+ <0x0 0x60004200 0x0 0x100>,
+ <0x0 0x60004300 0x0 0x100>,
+ <0x0 0x60004400 0x0 0x100>;
interrupt-controller;
#interrupt-cells = <3>;
interrupt-parent = <&gic>;
};
timer at 60005000 {
- compatible = "nvidia,tegra124-timer", "nvidia,tegra20-timer";
+ compatible = "nvidia,tegra124-timer", "nvidia,tegra30-timer", "nvidia,tegra20-timer";
reg = <0x60005000 0x400>;
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
@@ -316,7 +321,7 @@
* driver and APB DMA based serial driver for higher baudrate
* and performace. To enable the 8250 based driver, the compatible
* is "nvidia,tegra124-uart", "nvidia,tegra20-uart" and to enable
- * the APB DMA based serial driver, the comptible is
+ * the APB DMA based serial driver, the compatible is
* "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart".
*/
uarta: serial at 70006000 {
@@ -399,10 +404,15 @@
i2c at 7000c400 {
compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
reg = <0x7000c400 0x100>;
- interrupts = <0 84 0x04>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&tegra_car 54>;
+ clocks = <&tegra_car TEGRA124_CLK_I2C2>;
+ clock-names = "div-clk";
+ resets = <&tegra_car 54>;
+ reset-names = "i2c";
+ dmas = <&apbdma 22>, <&apbdma 22>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -631,6 +641,41 @@
status = "disabled";
};
+ usb at 70090000 {
+ compatible = "nvidia,tegra124-xusb";
+ reg = <0x70090000 0x8000>,
+ <0x70098000 0x1000>,
+ <0x70099000 0x1000>;
+ reg-names = "hcd", "fpci", "ipfs";
+
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&tegra_car TEGRA124_CLK_XUSB_HOST>,
+ <&tegra_car TEGRA124_CLK_XUSB_HOST_SRC>,
+ <&tegra_car TEGRA124_CLK_XUSB_FALCON_SRC>,
+ <&tegra_car TEGRA124_CLK_XUSB_SS>,
+ <&tegra_car TEGRA124_CLK_XUSB_SS_DIV2>,
+ <&tegra_car TEGRA124_CLK_XUSB_SS_SRC>,
+ <&tegra_car TEGRA124_CLK_XUSB_HS_SRC>,
+ <&tegra_car TEGRA124_CLK_XUSB_FS_SRC>,
+ <&tegra_car TEGRA124_CLK_PLL_U_480M>,
+ <&tegra_car TEGRA124_CLK_CLK_M>,
+ <&tegra_car TEGRA124_CLK_PLL_E>;
+ clock-names = "xusb_host", "xusb_host_src",
+ "xusb_falcon_src", "xusb_ss",
+ "xusb_ss_div2", "xusb_ss_src",
+ "xusb_hs_src", "xusb_fs_src",
+ "pll_u_480m", "clk_m", "pll_e";
+ resets = <&tegra_car 89>, <&tegra_car 156>,
+ <&tegra_car 143>;
+ reset-names = "xusb_host", "xusb_ss", "xusb_src";
+
+ nvidia,xusb-padctl = <&padctl>;
+
+ status = "disabled";
+ };
+
padctl: padctl at 7009f000 {
compatible = "nvidia,tegra124-xusb-padctl";
reg = <0x7009f000 0x1000>;
@@ -820,7 +865,7 @@
};
usb at 7d000000 {
- compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci";
+ compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci", "usb-ehci";
reg = <0x7d000000 0x4000>;
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
phy_type = "utmi";
@@ -857,10 +902,10 @@
};
usb at 7d004000 {
- compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci";
+ compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci", "usb-ehci";
reg = <0x7d004000 0x4000>;
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
- phy_type = "hsic";
+ phy_type = "utmi";
clocks = <&tegra_car TEGRA124_CLK_USB2>;
resets = <&tegra_car 58>;
reset-names = "usb";
diff --git a/include/dt-bindings/thermal/tegra124-soctherm.h b/include/dt-bindings/thermal/tegra124-soctherm.h
index 85aaf66690f9..729ab9fc325e 100644
--- a/include/dt-bindings/thermal/tegra124-soctherm.h
+++ b/include/dt-bindings/thermal/tegra124-soctherm.h
@@ -9,5 +9,6 @@
#define TEGRA124_SOCTHERM_SENSOR_MEM 1
#define TEGRA124_SOCTHERM_SENSOR_GPU 2
#define TEGRA124_SOCTHERM_SENSOR_PLLX 3
+#define TEGRA124_SOCTHERM_SENSOR_NUM 4
#endif
--
2.9.3
More information about the U-Boot
mailing list