[U-Boot] [PATCH v3 00/14] MIPS L2 cache support

[Paul Burton]

This series introduces support for initialising & maintaining L2 caches
on MIPS systems. This allows U-Boot to function correctly on systems
where such caches are present, whereas without performing L2 maintenance
it is likely to fail with cache coherence issues when writing code or
performing DMA transfers. It also fixes up a few issues with the cache
code in general, in particular ensuring that it clears execution hazards
at appropriate points.

Paul Burton (14):
  board_f: Add a mach_cpu_init callback
  MIPS: ath79: Use mach_cpu_init instead of arch_cpu_init
  MIPS: Probe cache line sizes once during boot
  MIPS: Enable use of the instruction cache earlier
  MIPS: Preserve Config implementation-defined bits
  MIPS: If we don't need DDR for cache init, init cache first
  MIPS: Define register names for cache init
  MIPS: Map CM Global Control Registers
  MIPS: L2 cache support
  MIPS: Join the coherent domain when a CM is present
  MIPS: Malta: Enable CM & L2 support
  MIPS: Ensure Config.K0=2 applies before any memory accesses
  MIPS: Clear hazard between TagLo writes & cache ops
  MIPS: Ensure cache ops complete in mips_cache_reset

 arch/mips/Kconfig                   |  24 ++++
 arch/mips/cpu/Makefile              |   2 +
 arch/mips/cpu/cm_init.S             |  45 ++++++
 arch/mips/cpu/cpu.c                 |   7 +
 arch/mips/cpu/start.S               |  27 ++--
 arch/mips/include/asm/cache.h       |   9 ++
 arch/mips/include/asm/cm.h          |  62 +++++++++
 arch/mips/include/asm/global_data.h |   7 +
 arch/mips/include/asm/mipsregs.h    |   6 +
 arch/mips/lib/cache.c               | 101 +++++++++++---
 arch/mips/lib/cache_init.S          | 271 +++++++++++++++++++++++++++++++++---
 arch/mips/mach-ath79/cpu.c          |   2 +-
 board/imgtec/malta/lowlevel_init.S  |   6 -
 common/board_f.c                    |   6 +
 14 files changed, 522 insertions(+), 53 deletions(-)
 create mode 100644 arch/mips/cpu/cm_init.S
 create mode 100644 arch/mips/include/asm/cm.h

-- 
2.10.0