[U-Boot] [Patch v6 5/9] armv8: fsl-layerscape: spl: remove BSS clearing and board_init_r

[Q.Y. Gong]

Hi York,


I'm still using an older version of toolchain(4.9-2014.07).


But I just tried to use the gcc-linaro-4.9-2016.02.

It couldn't boot up even without my patchset(hang in SPL).


Regards,

Qianyu

________________________________
From: york sun
Sent: Wednesday, September 14, 2016 4:45:37 AM
To: Q.Y. Gong; u-boot at lists.denx.de
Cc: Prabhakar Kushwaha; Vincent Hu; S.H. Xie; Z.Q. Hou; Wenbin Song; Shengzhou Liu
Subject: Re: [Patch v6 5/9] armv8: fsl-layerscape: spl: remove BSS clearing and board_init_r

On 09/08/2016 11:12 PM, Q.Y. Gong wrote:
>
> I can boot it up with this patch set on star server: LS2085ARDB-1.
> I also tested the single patch and no issue.
>
> This is my U-Boot command:
> =>tftp 82000000 b52263/ls2080ardb/u-boot-with-spl.bin;nand erase 80000 180000;nand write 82000000 80000 120000;qixis_reset nand
>

It looks like I have a bad combination of toolchain and code. First I
have to revert commit "ARM: Rework and correct barrier definitions",
then I can make it boot with older toolchains

Linaro GCC 4.9-2015.03, and Linaro GCC 4.9-2014.09

But I cannot use a newer toolchain with the same code, for example
gcc-linaro-4.9-2016.02, gcc-linaro-5.3-2016.02. What's your toolchain
version?

York