[U-Boot] [Patch v6 5/9] armv8: fsl-layerscape: spl: remove BSS clearing and board_init_r

[york sun]

On 09/08/2016 11:12 PM, Q.Y. Gong wrote:
>
> I can boot it up with this patch set on star server: LS2085ARDB-1.
> I also tested the single patch and no issue.
>
> This is my U-Boot command:
> =>tftp 82000000 b52263/ls2080ardb/u-boot-with-spl.bin;nand erase 80000 180000;nand write 82000000 80000 120000;qixis_reset nand
>

It looks like I have a bad combination of toolchain and code. First I 
have to revert commit "ARM: Rework and correct barrier definitions", 
then I can make it boot with older toolchains

Linaro GCC 4.9-2015.03, and Linaro GCC 4.9-2014.09

But I cannot use a newer toolchain with the same code, for example 
gcc-linaro-4.9-2016.02, gcc-linaro-5.3-2016.02. What's your toolchain 
version?

York