[U-Boot] [PATCH v3 3/7] arm: omap-common: adds secure image name common to, OMAP and keystone
Srinivas, Madan
madans at ti.com
Fri Sep 9 05:01:01 CEST 2016
As K2 can directly boot u-boot, add u-boot_HS_MLO as the
secure image while booting secure K2 devicesr, for all
boot modes other than SPI flash.
Signed-off-by: Madan Srinivas <madans at ti.com>
Reviewed-by: Tom Rini <trini at konsulko.com>
---
Changes in v3: None
Changes in v2:
- Adds a new name for the signed output image in config_secure.mk
to keep it in line with the image name used by non-secure keystone
devices.
arch/arm/cpu/armv7/omap-common/config_secure.mk | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/arm/cpu/armv7/omap-common/config_secure.mk
b/arch/arm/cpu/armv7/omap-common/config_secure.mk
index 1122439..0ece3f8 100644
--- a/arch/arm/cpu/armv7/omap-common/config_secure.mk
+++ b/arch/arm/cpu/armv7/omap-common/config_secure.mk
@@ -76,6 +76,12 @@ u-boot-spl_HS_ISSW: $(obj)/u-boot-spl.bin
u-boot-spl_HS_SPI_X-LOADER: $(obj)/u-boot-spl.bin
$(call if_changed,mkomapsecimg)
+# For supporting single stage boot on keystone, the image is a full u-boot
+# file, not an SPL. This will work for all boot devices, other than SPI
+# flash
+u-boot_HS_MLO: $(obj)/u-boot.bin
+ $(call if_changed,mkomapsecimg)
+
# For supporting single stage XiP QSPI on AM43xx, the image is a full
u-boot
# file, not an SPL. In this case the mkomapsecimg command looks for a
# u-boot-HS_* prefix
--
2.7.4
More information about the U-Boot
mailing list