[U-Boot] [PATCH] fsl-ifc-nand : Corrected the programming of chip select

[Matt Weber]

Corrected the chip selection in IFC_NAND_CSEL register. Due to this
issue in multi-chip nand use-case, IFC was always pointing to the last
probed chip even though the user select another device through "nand
device" command.

Signed-off-by: Ronak Desai <ronak.desai at rockwellcollins.com>
Signed-off-by: Matthew Weber <matthew.weber at rockwellcollins.com>
---
 drivers/mtd/nand/fsl_ifc_nand.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mtd/nand/fsl_ifc_nand.c b/drivers/mtd/nand/fsl_ifc_nand.c
index 7001cbd..2ce4a7d 100644
--- a/drivers/mtd/nand/fsl_ifc_nand.c
+++ b/drivers/mtd/nand/fsl_ifc_nand.c
@@ -296,7 +296,7 @@ static int fsl_ifc_run_command(struct mtd_info *mtd)
 	int i;
 
 	/* set the chip select for NAND Transaction */
-	ifc_out32(&ifc->ifc_nand.nand_csel, ifc_ctrl->cs_nand);
+	ifc_out32(&ifc->ifc_nand.nand_csel, priv->bank << IFC_NAND_CSEL_SHIFT);
 
 	/* start read/write seq */
 	ifc_out32(&ifc->ifc_nand.nandseq_strt,
-- 
1.9.1