[U-Boot] [PATCH] ARM: Respect CONFIG_SPL_STACK define in lowlevel_init.S

[Siarhei Siamashka]

The SPL and U-Boot proper may use different initial stack
locations, which are configured via CONFIG_SPL_STACK and
CONFIG_SYS_INIT_SP_ADDR defines. The lowlevel_init.S
code needs to handle this in the same way as crt0.S

Without this fix, setting the U-Boot stack location to some
place, which is not safely accessible by the SPL (such as
the DRAM), causes a very early SPL deadlock.

Signed-off-by: Siarhei Siamashka <siarhei.siamashka at gmail.com>
---
 arch/arm/cpu/armv7/lowlevel_init.S | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/cpu/armv7/lowlevel_init.S b/arch/arm/cpu/armv7/lowlevel_init.S
index 1872c57..658934d 100644
--- a/arch/arm/cpu/armv7/lowlevel_init.S
+++ b/arch/arm/cpu/armv7/lowlevel_init.S
@@ -19,7 +19,11 @@ ENTRY(lowlevel_init)
 	/*
 	 * Setup a temporary stack. Global data is not available yet.
 	 */
+#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_STACK)
+	ldr	sp, =CONFIG_SPL_STACK
+#else
 	ldr	sp, =CONFIG_SYS_INIT_SP_ADDR
+#endif
 	bic	sp, sp, #7 /* 8-byte alignment for ABI compliance */
 #ifdef CONFIG_SPL_DM
 	mov	r9, #0
-- 
2.7.3