[U-Boot] [PATCH 1/2] ARM: keystone2: Add support for parsing monitor header

[Lokesh Vutla]

Given that boot monitor image is being generated to a specific target location
depending on the SoC and U-boot relies on addr_mon env variable to be aligned
with boot monitor target location. When ever the target address gets updated in
boot monitor, it is difficult to sync between u-boot and boot monitor and also
there is no way to update user that boot monitor image is updated.

To avoid this problem, boot monitor image is being generated with mkimage
header. Adding support in mon_install command for parsing this header.

Signed-off-by: Suman Anna <s-anna at ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla at ti.com>
---
 arch/arm/mach-keystone/cmd_mon.c | 22 ++++++++++++++++++----
 1 file changed, 18 insertions(+), 4 deletions(-)

diff --git a/arch/arm/mach-keystone/cmd_mon.c b/arch/arm/mach-keystone/cmd_mon.c
index 6a9bdc9..591e758 100644
--- a/arch/arm/mach-keystone/cmd_mon.c
+++ b/arch/arm/mach-keystone/cmd_mon.c
@@ -9,14 +9,16 @@
 
 #include <common.h>
 #include <command.h>
+#include <image.h>
 #include <mach/mon.h>
 asm(".arch_extension sec\n\t");
 
 static int do_mon_install(cmd_tbl_t *cmdtp, int flag, int argc,
 			  char * const argv[])
 {
-	u32 addr, dpsc_base = 0x1E80000, freq;
+	u32 addr, dpsc_base = 0x1E80000, freq, load_addr, size;
 	int     rcode = 0;
+	struct image_header *header;
 
 	if (argc < 2)
 		return CMD_RET_USAGE;
@@ -25,9 +27,21 @@ static int do_mon_install(cmd_tbl_t *cmdtp, int flag, int argc,
 
 	addr = simple_strtoul(argv[1], NULL, 16);
 
-	rcode = mon_install(addr, dpsc_base, freq);
-	printf("## installed monitor, freq [%d], status %d\n",
-	       freq, rcode);
+	header = (struct image_header *)addr;
+
+	if (image_get_magic(header) != IH_MAGIC) {
+		printf("## Please update monitor image\n");
+		return -EFAULT;
+	}
+
+	load_addr = image_get_load(header);
+	size = image_get_data_size(header);
+	memcpy((void *)load_addr, (void *)(addr + sizeof(struct image_header)),
+	       size);
+
+	rcode = mon_install(load_addr, dpsc_base, freq);
+	printf("## installed monitor @ 0x%x, freq [%d], status %d\n",
+	       load_addr, freq, rcode);
 
 	return 0;
 }
-- 
2.9.3