[U-Boot] [PATCH RFC 5/5] imx: mx6ul: Add initial board support for Engicam GEAM6UL
Michael Trimarchi
michael at amarulasolutions.com
Sun Sep 4 15:10:47 CEST 2016
Hi Fabio
On Sun, Sep 4, 2016 at 3:08 PM, Fabio Estevam <festevam at gmail.com> wrote:
> Hi Jagan,
>
> On Sat, Sep 3, 2016 at 5:22 AM, Jagan Teki <jagannadh.teki at gmail.com> wrote:
>>
>> diff --git a/board/freescale/mx6ul/Kconfig b/board/freescale/mx6ul/Kconfig
>> index f97b905..d902cd0 100644
>> --- a/board/freescale/mx6ul/Kconfig
>> +++ b/board/freescale/mx6ul/Kconfig
>
> At least for i.MX we follow the convention:
> board/vendor/vendorboardname, so under board/freescale directory we
> would expect boards manufactured by FSL/NXP only.
>
>> @@ -1,4 +1,4 @@
>> -if TARGET_MX6UL_14X14_EVK || TARGET_MX6UL_9X9_EVK
>> +if TARGET_MX6UL_14X14_EVK || TARGET_MX6UL_9X9_EVK || TARGET_MX6UL_GEAM_KIT
>>
>> config SYS_BOARD
>> default "mx6ul"
>> diff --git a/board/freescale/mx6ul/MAINTAINERS b/board/freescale/mx6ul/MAINTAINERS
>> index 20caeee..3265858 100644
>> --- a/board/freescale/mx6ul/MAINTAINERS
>> +++ b/board/freescale/mx6ul/MAINTAINERS
>> @@ -5,3 +5,8 @@ F: board/freescale/mx6ul/
>
> It would be better if you were listed as the maintainer of the Engicam
> mx6ul board.
>
> How can I person that does not have the hardware nor it is familiar
> with it, be the maintainer of such platform?
>
Hardware is on the way ;).
Michael
>> --- a/board/freescale/mx6ul/board.c
>> +++ b/board/freescale/mx6ul/board.c
>> @@ -693,8 +693,10 @@ int checkboard(void)
>> {
>> if (is_mx6ul_9x9_evk())
>> puts("Board: MX6UL 9x9 EVK\n");
>> - else
>> + else if (is_mx6ul_14x14_evk())
>> puts("Board: MX6UL 14x14 EVK\n");
>> + else
>> + puts("Board: MX6UL GEA KIT\n");
>>
>> return 0;
>
> If I want to change board.c to improve/fix the code for mx6ulevk there
> is risk that such change could break mx6ulgea support.
>
> I prefer that you place the new board at board/engicam/mx6ulgea, or something.
>
>
>> --- a/include/configs/mx6ul.h
>> +++ b/include/configs/mx6ul.h
>> @@ -14,6 +14,7 @@
>> #include <asm/imx-common/gpio.h>
>>
>> #define is_mx6ul_9x9_evk() CONFIG_IS_ENABLED(TARGET_MX6UL_9X9_EVK)
>> +#define is_mx6ul_14x14_evk() CONFIG_IS_ENABLED(TARGET_MX6UL_14x14_EVK)
>
> This seems to be an unrelated change.
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
--
| Michael Nazzareno Trimarchi Amarula Solutions BV |
| COO - Founder Cruquiuskade 47 |
| +31(0)851119172 Amsterdam 1018 AM NL |
| [`as] http://www.amarulasolutions.com |
More information about the U-Boot
mailing list