[U-Boot] [PATCH v2 00/12] binman: A tool for creating firmware images
Simon Glass
sjg at chromium.org
Sun Sep 25 23:52:16 CEST 2016
This series introduces binman, a tool designed to create firmware images.
It provides a way to bring together various binaries and place them in an
image, at particular positions and with configurable alignment.
Packaging of firmware is quite a different task from building the various
parts. In many cases the various binaries which go into the image come from
separate build systems. For example, ARM Trusted Firmware is used on ARMv8
devices but is not built in the U-Boot tree. If a Linux kernel is included
in the firmware image, it is built elsewhere.
It is of course possible to add more and more build rules to the U-Boot
build system to cover these cases. It can shell out to other Makefiles and
build scripts. But it seems better to create a clear divide between building
software and packaging it.
U-Boot supports a very large number of boards. Many of these have their own
specific rules for how an image should be put together so that it boots
correctly. At present these rules are described by manual instructions,
different for each board. By turning these instructions into a standard
format, we can support making valid images for any board without manual
effort, lots of READMEs, etc.
Images consist of a number of entries which are combined to make up the
final image. The image is described in the device tree for the board, meaning
that it can be accessed at run-time if desired.
Binman is an extensible tool. A set of standard entries is provides, but
new entries can be created fairly easily. Entries can be as simple as
providing the name of a file to include. They can also handle more complex
requirements, such as adjusting the input file or reading header information
from one entry to control the position of another.
U-Boot's mkimage builds FIT images and various other binaries. Binman
augments this by allowing these binaries to be packed together. While FIT
should be used where possible, it cannot be used everywhere. For example,
many devices require executable code at a particular offset in the image.
X86 machines require lots of binary blobs at particular places, and a
microcode collection easily accessible at boot.
So far binman has enough functionality to be useful, but apart from a few RFC
patches, no attempt is made to switch boards over to use it. There should be
enough material to permit review and comments.
The series is available at u-boot-dm/binman-working
Future work and missing features are documented in the README.
Changes in v2:
- Add a new patch to fix a bug in GetProp()
- Add new patch to adjust GetProps() in fdt_normal to use the node path
- Add a new patch to allow testing of the fallback Fdt library
- Add test for code coverage
- drop the unused __len__() method
- Fix the -b option
- Add automated test coverage
- Various changes and improvements based on using this tool for a while
- Put the binman definition in a common file for x86
Simon Glass (12):
dtoc: Fix bug in GetProp()
dtoc: Adjust GetProps() in fdt_normal to use the node path
dtoc: Add a way for tests to request the fallback library
binman: Introduce binman, a tool for building binary images
binman: Add basic entry types for U-Boot
binman: Add support for building x86 ROMs
binman: Add support for u-boot.img as an input binary
binman: Add support for building x86 ROMs with SPL
binman: Add a build rule for binman
binman: Allow configuration options to be used in .dts files
RFC: Use binman for a sunxi board
RFC: Use binman for an x86 board
Makefile | 55 +-
arch/arm/dts/sun7i-a20-pcduino3.dts | 12 +
arch/x86/dts/binman.dtsi | 62 ++
arch/x86/dts/chromebook_link.dts | 1 +
scripts/Makefile.lib | 5 +
tools/binman/.gitignore | 1 +
tools/binman/README | 491 +++++++++++++
tools/binman/binman | 1 +
tools/binman/binman.py | 116 ++++
tools/binman/cmdline.py | 53 ++
tools/binman/control.py | 118 ++++
tools/binman/entry_test.py | 27 +
tools/binman/etype/_testing.py | 26 +
tools/binman/etype/blob.py | 37 +
tools/binman/etype/entry.py | 190 +++++
tools/binman/etype/intel_descriptor.py | 55 ++
tools/binman/etype/intel_me.py | 17 +
tools/binman/etype/intel_mrc.py | 17 +
tools/binman/etype/intel_vga.py | 17 +
tools/binman/etype/u_boot.py | 17 +
tools/binman/etype/u_boot_dtb.py | 17 +
tools/binman/etype/u_boot_dtb_with_ucode.py | 72 ++
tools/binman/etype/u_boot_img.py | 17 +
tools/binman/etype/u_boot_nodtb.py | 17 +
tools/binman/etype/u_boot_spl.py | 17 +
tools/binman/etype/u_boot_spl_bss_pad.py | 26 +
tools/binman/etype/u_boot_spl_with_ucode_ptr.py | 28 +
tools/binman/etype/u_boot_ucode.py | 77 +++
tools/binman/etype/u_boot_with_ucode_ptr.py | 73 ++
tools/binman/etype/x86_start16.py | 17 +
tools/binman/etype/x86_start16_spl.py | 17 +
tools/binman/fdt_test.py | 48 ++
tools/binman/func_test.py | 763 +++++++++++++++++++++
tools/binman/image.py | 229 +++++++
tools/binman/test/01_invalid.dts | 5 +
tools/binman/test/02_missing_node.dts | 6 +
tools/binman/test/03_empty.dts | 9 +
tools/binman/test/04_invalid_entry.dts | 11 +
tools/binman/test/05_simple.dts | 11 +
tools/binman/test/06_dual_image.dts | 22 +
tools/binman/test/07_bad_align.dts | 12 +
tools/binman/test/08_pack.dts | 30 +
tools/binman/test/09_pack_extra.dts | 35 +
tools/binman/test/10_pack_align_power2.dts | 12 +
tools/binman/test/11_pack_align_size_power2.dts | 12 +
tools/binman/test/12_pack_inv_align.dts | 13 +
tools/binman/test/13_pack_inv_size_align.dts | 13 +
tools/binman/test/14_pack_overlap.dts | 16 +
tools/binman/test/15_pack_overflow.dts | 12 +
tools/binman/test/16_pack_image_overflow.dts | 13 +
tools/binman/test/17_pack_image_size.dts | 13 +
tools/binman/test/18_pack_image_align.dts | 13 +
tools/binman/test/19_pack_inv_image_align.dts | 14 +
.../binman/test/20_pack_inv_image_align_power2.dts | 13 +
tools/binman/test/21_image_pad.dts | 16 +
tools/binman/test/22_image_name.dts | 21 +
tools/binman/test/23_blob.dts | 12 +
tools/binman/test/24_sorted.dts | 17 +
tools/binman/test/25_pack_zero_size.dts | 15 +
tools/binman/test/26_pack_u_boot_dtb.dts | 14 +
tools/binman/test/27_pack_4gb_no_size.dts | 18 +
tools/binman/test/28_pack_4gb_outside.dts | 19 +
tools/binman/test/29_x86-rom.dts | 19 +
tools/binman/test/30_x86-rom-me-no-desc.dts | 15 +
tools/binman/test/31_x86-rom-me.dts | 18 +
tools/binman/test/32_intel-vga.dts | 13 +
tools/binman/test/33_x86-start16.dts | 13 +
tools/binman/test/34_x86_ucode.dts | 29 +
tools/binman/test/35_x86_single_ucode.dts | 26 +
tools/binman/test/36_u_boot_img.dts | 11 +
tools/binman/test/37_x86_no_ucode.dts | 20 +
tools/binman/test/38_x86_ucode_missing_node.dts | 26 +
tools/binman/test/39_x86_ucode_missing_node2.dts | 23 +
tools/binman/test/40_x86_ucode_not_in_image.dts | 28 +
tools/binman/test/41_unknown_pos_size.dts | 11 +
tools/binman/test/u_boot_no_ucode_ptr | Bin 0 -> 4182 bytes
tools/binman/test/u_boot_no_ucode_ptr.c | 15 +
tools/binman/test/u_boot_ucode_ptr | Bin 0 -> 4175 bytes
tools/binman/test/u_boot_ucode_ptr.c | 15 +
tools/binman/test/u_boot_ucode_ptr.lds | 18 +
tools/dtoc/fdt_fallback.py | 2 +-
tools/dtoc/fdt_normal.py | 9 +-
tools/dtoc/fdt_select.py | 16 +-
83 files changed, 3425 insertions(+), 55 deletions(-)
create mode 100644 arch/x86/dts/binman.dtsi
create mode 100644 tools/binman/.gitignore
create mode 100644 tools/binman/README
create mode 120000 tools/binman/binman
create mode 100755 tools/binman/binman.py
create mode 100644 tools/binman/cmdline.py
create mode 100644 tools/binman/control.py
create mode 100644 tools/binman/entry_test.py
create mode 100644 tools/binman/etype/_testing.py
create mode 100644 tools/binman/etype/blob.py
create mode 100644 tools/binman/etype/entry.py
create mode 100644 tools/binman/etype/intel_descriptor.py
create mode 100644 tools/binman/etype/intel_me.py
create mode 100644 tools/binman/etype/intel_mrc.py
create mode 100644 tools/binman/etype/intel_vga.py
create mode 100644 tools/binman/etype/u_boot.py
create mode 100644 tools/binman/etype/u_boot_dtb.py
create mode 100644 tools/binman/etype/u_boot_dtb_with_ucode.py
create mode 100644 tools/binman/etype/u_boot_img.py
create mode 100644 tools/binman/etype/u_boot_nodtb.py
create mode 100644 tools/binman/etype/u_boot_spl.py
create mode 100644 tools/binman/etype/u_boot_spl_bss_pad.py
create mode 100644 tools/binman/etype/u_boot_spl_with_ucode_ptr.py
create mode 100644 tools/binman/etype/u_boot_ucode.py
create mode 100644 tools/binman/etype/u_boot_with_ucode_ptr.py
create mode 100644 tools/binman/etype/x86_start16.py
create mode 100644 tools/binman/etype/x86_start16_spl.py
create mode 100644 tools/binman/fdt_test.py
create mode 100644 tools/binman/func_test.py
create mode 100644 tools/binman/image.py
create mode 100644 tools/binman/test/01_invalid.dts
create mode 100644 tools/binman/test/02_missing_node.dts
create mode 100644 tools/binman/test/03_empty.dts
create mode 100644 tools/binman/test/04_invalid_entry.dts
create mode 100644 tools/binman/test/05_simple.dts
create mode 100644 tools/binman/test/06_dual_image.dts
create mode 100644 tools/binman/test/07_bad_align.dts
create mode 100644 tools/binman/test/08_pack.dts
create mode 100644 tools/binman/test/09_pack_extra.dts
create mode 100644 tools/binman/test/10_pack_align_power2.dts
create mode 100644 tools/binman/test/11_pack_align_size_power2.dts
create mode 100644 tools/binman/test/12_pack_inv_align.dts
create mode 100644 tools/binman/test/13_pack_inv_size_align.dts
create mode 100644 tools/binman/test/14_pack_overlap.dts
create mode 100644 tools/binman/test/15_pack_overflow.dts
create mode 100644 tools/binman/test/16_pack_image_overflow.dts
create mode 100644 tools/binman/test/17_pack_image_size.dts
create mode 100644 tools/binman/test/18_pack_image_align.dts
create mode 100644 tools/binman/test/19_pack_inv_image_align.dts
create mode 100644 tools/binman/test/20_pack_inv_image_align_power2.dts
create mode 100644 tools/binman/test/21_image_pad.dts
create mode 100644 tools/binman/test/22_image_name.dts
create mode 100644 tools/binman/test/23_blob.dts
create mode 100644 tools/binman/test/24_sorted.dts
create mode 100644 tools/binman/test/25_pack_zero_size.dts
create mode 100644 tools/binman/test/26_pack_u_boot_dtb.dts
create mode 100644 tools/binman/test/27_pack_4gb_no_size.dts
create mode 100644 tools/binman/test/28_pack_4gb_outside.dts
create mode 100644 tools/binman/test/29_x86-rom.dts
create mode 100644 tools/binman/test/30_x86-rom-me-no-desc.dts
create mode 100644 tools/binman/test/31_x86-rom-me.dts
create mode 100644 tools/binman/test/32_intel-vga.dts
create mode 100644 tools/binman/test/33_x86-start16.dts
create mode 100644 tools/binman/test/34_x86_ucode.dts
create mode 100644 tools/binman/test/35_x86_single_ucode.dts
create mode 100644 tools/binman/test/36_u_boot_img.dts
create mode 100644 tools/binman/test/37_x86_no_ucode.dts
create mode 100644 tools/binman/test/38_x86_ucode_missing_node.dts
create mode 100644 tools/binman/test/39_x86_ucode_missing_node2.dts
create mode 100644 tools/binman/test/40_x86_ucode_not_in_image.dts
create mode 100644 tools/binman/test/41_unknown_pos_size.dts
create mode 100755 tools/binman/test/u_boot_no_ucode_ptr
create mode 100644 tools/binman/test/u_boot_no_ucode_ptr.c
create mode 100755 tools/binman/test/u_boot_ucode_ptr
create mode 100644 tools/binman/test/u_boot_ucode_ptr.c
create mode 100644 tools/binman/test/u_boot_ucode_ptr.lds
--
2.8.0.rc3.226.g39d4020
More information about the U-Boot
mailing list