[U-Boot] [PATCH] wandboard: Remove videoargs script

[Fabio Estevam]

From: Fabio Estevam <fabio.estevam at nxp.com>

The videoargs script is kernel version dependent and since wandboard
uses distro config, there is no need to handle videoargs locally.

In case such video related settings are needed, then the proper
location would be the distro extlinux.conf or boot.scr files.

So remove 'videoargs' script.

Signed-off-by: Fabio Estevam <fabio.estevam at nxp.com>
---
 include/configs/wandboard.h | 26 --------------------------
 1 file changed, 26 deletions(-)

diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h
index 295f834..d504aec 100644
--- a/include/configs/wandboard.h
+++ b/include/configs/wandboard.h
@@ -118,32 +118,6 @@
 				"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
 			"fi; "	\
 		"fi\0" \
-	"videoargs=" \
-		"setenv nextcon 0; " \
-		"if hdmidet; then " \
-			"setenv bootargs ${bootargs} " \
-				"video=mxcfb${nextcon}:dev=hdmi,1280x720M at 60," \
-					"if=RGB24; " \
-			"setenv fbmen fbmem=28M; " \
-			"setexpr nextcon ${nextcon} + 1; " \
-		"else " \
-			"echo - no HDMI monitor;" \
-		"fi; " \
-		"i2c dev 1; " \
-		"if i2c probe 0x10; then " \
-			"setenv bootargs ${bootargs} " \
-				"video=mxcfb${nextcon}:dev=lcd,800x480 at 60," \
-					"if=RGB666,bpp=32; " \
-			"if test 0 -eq ${nextcon}; then " \
-				"setenv fbmem fbmem=10M; " \
-			"else " \
-				"setenv fbmem ${fbmem},10M; " \
-			"fi; " \
-			"setexpr nextcon ${nextcon} + 1; " \
-		"else " \
-			"echo '- no FWBADAPT-7WVGA-LCD-F07A-0102 display';" \
-		"fi; " \
-		"setenv bootargs ${bootargs} ${fbmem}\0" \
 	"findfdt="\
 		"if test $board_name = C1 && test $board_rev = MX6Q ; then " \
 			"setenv fdtfile imx6q-wandboard.dtb; fi; " \
-- 
2.7.4