[U-Boot] [PATCH v2 11/12] RFC: Use binman for a sunxi board

Simon Glass sjg at chromium.org
Sun Sep 25 23:52:27 CEST 2016


Add an example usage of binman for a sunxi board. This involves adding the
image definition to the device tree and using it in the Makefile.

This is for example only.

Signed-off-by: Simon Glass <sjg at chromium.org>
---

Changes in v2: None

 Makefile                            |  4 +---
 arch/arm/dts/sun7i-a20-pcduino3.dts | 12 ++++++++++++
 2 files changed, 13 insertions(+), 3 deletions(-)

diff --git a/Makefile b/Makefile
index a5428a2..31c9483 100644
--- a/Makefile
+++ b/Makefile
@@ -1121,10 +1121,8 @@ u-boot-x86-16bit.bin: u-boot FORCE
 endif
 
 ifneq ($(CONFIG_SUNXI),)
-OBJCOPYFLAGS_u-boot-sunxi-with-spl.bin = -I binary -O binary \
-				   --pad-to=$(CONFIG_SPL_PAD_TO) --gap-fill=0xff
 u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin u-boot.img FORCE
-	$(call if_changed,pad_cat)
+	$(call if_changed,binman)
 endif
 
 ifneq ($(CONFIG_TEGRA),)
diff --git a/arch/arm/dts/sun7i-a20-pcduino3.dts b/arch/arm/dts/sun7i-a20-pcduino3.dts
index 1a8b39b..141044e 100644
--- a/arch/arm/dts/sun7i-a20-pcduino3.dts
+++ b/arch/arm/dts/sun7i-a20-pcduino3.dts
@@ -42,6 +42,7 @@
  */
 
 /dts-v1/;
+#include <config.h>
 #include "sun7i-a20.dtsi"
 #include "sunxi-common-regulators.dtsi"
 
@@ -62,6 +63,17 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	binman {
+		filename = "u-boot-sunxi-with-spl.bin";
+		pad-byte = <0xff>;
+		blob {
+			filename = "spl/sunxi-spl.bin";
+		};
+		u-boot-img {
+			pos = <CONFIG_SPL_PAD_TO>;
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
-- 
2.8.0.rc3.226.g39d4020



More information about the U-Boot mailing list