[U-Boot] [PATCH 3/4] ARM: tegra: add DWC EQoS (ethernet) to Tegra186 DT

[Stephen Warren]

From: Stephen Warren <swarren at nvidia.com>

Tegra186 includes a Synopsys DWC EQoS (Ethernet) device. Add this to the
Tegra186 SoC DT so that boards can make use of it.

Signed-off-by: Stephen Warren <swarren at nvidia.com>
---
 arch/arm/dts/tegra186.dtsi | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/arch/arm/dts/tegra186.dtsi b/arch/arm/dts/tegra186.dtsi
index f878b6532510..dd9e3b869de7 100644
--- a/arch/arm/dts/tegra186.dtsi
+++ b/arch/arm/dts/tegra186.dtsi
@@ -31,6 +31,26 @@
 		#interrupt-cells = <2>;
 	};
 
+	ethernet at 2490000 {
+		compatible = "nvidia,tegra186-eqos", "snps,dwc-qos-ethernet-4.10";
+		reg = <0x0 0x02490000 0x0 0x10000>;
+		interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&bpmp TEGRA186_CLK_AXI_CBB>,
+			<&bpmp TEGRA186_CLK_EQOS_AXI>,
+			<&bpmp TEGRA186_CLK_EQOS_RX>,
+			<&bpmp TEGRA186_CLK_EQOS_PTP_REF>,
+			<&bpmp TEGRA186_CLK_EQOS_TX>;
+		clock-names = "slave_bus",
+			"master_bus",
+			"rx",
+			"ptp_ref",
+			"tx";
+		resets = <&bpmp TEGRA186_RESET_EQOS>;
+		reset-names = "eqos";
+		phy-mode = "rgmii";
+		status = "disabled";
+	};
+
 	uarta: serial at 3100000 {
 		compatible = "nvidia,tegra186-uart", "nvidia,tegra20-uart";
 		reg = <0x0 0x03100000 0x0 0x10000>;
-- 
2.9.3