[U-Boot] [PATCH v2 0/2] Detect and reject new ad-hoc CONFIG options
Simon Glass
sjg at chromium.org
Tue Sep 13 20:38:45 CEST 2016
Hi Tom,
On 13 September 2016 at 07:49, Tom Rini <trini at konsulko.com> wrote:
> On Tue, Sep 13, 2016 at 07:35:42AM -0600, Simon Glass wrote:
>> Hi Tom,
>>
>> On 13 September 2016 at 07:16, Tom Rini <trini at konsulko.com> wrote:
>> > On Mon, Sep 12, 2016 at 11:20:00PM -0600, Simon Glass wrote:
>> >
>> >> Despite the availability of Kconfig, the number of ad-hoc CONFIG options in
>> >> U-Boot is still at over 8000.
>> >>
>> >> In February 2015 (commit 741e58e0) there were around 8387 ad-hoc CONFIGs.
>> >> As of this patch there are about 8336, only a little fewer.
>> >>
>> >> One problem is that new ones are still being added, admittedly at a slower
>> >> rate. This series adds a Makefile check to detect that and produce a build
>> >> error. This provides immediate feedback that new CONFIG options should go in
>> >> Kconfig.
>> >>
>> >> Changes in v2:
>> >> - Rebase to mainline
>> >> - Fix scripts so that there are no errors
>> >> - Add the 'build-whitelist.sh' script to the tree
>> >>
>> >> Simon Glass (2):
>> >> Kconfig: Add a whitelist of ad-hoc CONFIG options
>> >> Makefile: Give a build error if ad-hoc CONFIG options are added
>> >
>> > OK, this is still a little fragile. When I do:
>> > ./tools/buildman/buildman -b master --force-build --step 0 \
>> > -SCdvel 'avr32|nds32|bfin|m68k|microblaze|or32|sh4|sparc|mips|mips64|xtensa'
>> >
>> > vs kconfig-working2 I'm seeing a bunch of failures:
>> > +(M5475GFE) make[1]: *** [no_new_adhoc_configs_check] Error 1
>> > +(M5475GFE) make: *** [sub-make] Error 2
>>
>> Yes it looks like I was testing it incorrectly, relying on running on
>> from the SPL series. One problem is that it misses configs with lower
>> case which are defined in Kconfig and then used. I've updated
>> u-boot-dm/kconfig-working2 to deal with that.
>>
>> I'll take another look at this and have an update out today. But we
>> can decouple this from the painful SPL series if you like, since in
>> principle we can run the generation script to create the first of the
>> two patches.
>
> Yes, we can de-couple this. However, you might want to take a look at
> say xtensa as in my check with before/after kconfig-working2 there's a
> tiny size difference and I don't see that normally for a Kconfig
> migration. I'm doing my arm/powerpc build now to see if there's a
> similar set of size changes there and will then start poking at map
> files.
Here's a full list of config changes for the SPL series as far as I can tell:
$ buildman -b kc4-conf -fC --step 0 -DI -s
boards.cfg is up to date. Nothing to do.
Summary of 2 commits for 1196 boards (32 threads, 1 job per thread)
01: buildman
openrisc: + openrisc-generic
sparc: + grsim grsim_leon2 gr_cpci_ax2000 gr_xc3s_1500 gr_ep2s60
blackfin: + bf609-ezkit
46: Convert CONFIG_SPL_YMODEM_SUPPORT to Kconfig
arm:
+ u-boot.cfg: CONFIG_ENV_ADDR=(CONFIG_SYS_FLASH_BASE +
CONFIG_SYS_MONITOR_LEN) CONFIG_ENV_IS_IN_FLASH=1
CONFIG_ENV_SECT_SIZE=0x00010000 CONFIG_NAND=1 CONFIG_SPL_ENV_SUPPORT=1
CONFIG_SPL_NET_SUPPORT=1 CONFIG_SPL_NET_VCI_STRING="" CONFIG_STV0991=1
CONFIG_SYS_MONITOR_LEN=0x00040000 CONFIG_USBTTY=1
- u-boot.cfg: CONFIG_DW_UDC=1 CONFIG_ENV_IS_IN_NAND=1
CONFIG_ENV_OFFSET=0x60000 CONFIG_ENV_RANGE=0x10000
CONFIG_SPEAR_USBTTY=1 CONFIG_SPL_NET_VCI_STRING="AM43xx U-Boot SPL"
CONFIG_USBD_HS=1 CONFIG_USBD_MANUFACTURER="ST Microelectronics"
CONFIG_USBD_PRODUCT_NAME="SPEAr SoC" CONFIG_USB_DEVICE=1
CONFIG_USB_TTY=1 CONFIG_nand=1 CONFIG_spear300=1 CONFIG_spear310=1
CONFIG_spear320=1 CONFIG_spear600=1 CONFIG_stv0991=1 CONFIG_usbtty=1
+ u-boot-spl.cfg: CONFIG_SPL_MMC_SUPPORT=1
CONFIG_SPL_NAND_SUPPORT=1 CONFIG_SPL_YMODEM_SUPPORT=1
- u-boot-spl.cfg: CONFIG_SPL_NET_VCI_STRING="AM43xx U-Boot SPL"
+ all: CONFIG_ENV_ADDR=(CONFIG_SYS_FLASH_BASE +
CONFIG_SYS_MONITOR_LEN) CONFIG_ENV_IS_IN_FLASH=1
CONFIG_ENV_SECT_SIZE=0x00010000 CONFIG_NAND=1 CONFIG_SPL_ENV_SUPPORT=1
CONFIG_SPL_MMC_SUPPORT=1 CONFIG_SPL_NAND_SUPPORT=1
CONFIG_SPL_NET_SUPPORT=1 CONFIG_SPL_NET_VCI_STRING=""
CONFIG_SPL_YMODEM_SUPPORT=1 CONFIG_STV0991=1
CONFIG_SYS_MONITOR_LEN=0x00040000 CONFIG_USBTTY=1
- all: CONFIG_DW_UDC=1 CONFIG_ENV_IS_IN_NAND=1
CONFIG_ENV_OFFSET=0x60000 CONFIG_ENV_RANGE=0x10000
CONFIG_SPEAR_USBTTY=1 CONFIG_SPL_NET_VCI_STRING="AM43xx U-Boot SPL"
CONFIG_USBD_HS=1 CONFIG_USBD_MANUFACTURER="ST Microelectronics"
CONFIG_USBD_PRODUCT_NAME="SPEAr SoC" CONFIG_USB_DEVICE=1
CONFIG_USB_TTY=1 CONFIG_nand=1 CONFIG_spear300=1 CONFIG_spear310=1
CONFIG_spear320=1 CONFIG_spear600=1 CONFIG_stv0991=1 CONFIG_usbtty=1
spear320_usbtty spear320_usbtty_pnor :
+ u-boot.cfg: CONFIG_USBTTY=1
- u-boot.cfg: CONFIG_DW_UDC=1 CONFIG_SPEAR_USBTTY=1
CONFIG_USBD_HS=1 CONFIG_USBD_MANUFACTURER="ST Microelectronics"
CONFIG_USBD_PRODUCT_NAME="SPEAr SoC" CONFIG_USB_DEVICE=1
CONFIG_USB_TTY=1 CONFIG_spear320=1 CONFIG_usbtty=1
+ all: CONFIG_USBTTY=1
- all: CONFIG_DW_UDC=1 CONFIG_SPEAR_USBTTY=1 CONFIG_USBD_HS=1
CONFIG_USBD_MANUFACTURER="ST Microelectronics"
CONFIG_USBD_PRODUCT_NAME="SPEAr SoC" CONFIG_USB_DEVICE=1
CONFIG_USB_TTY=1 CONFIG_spear320=1 CONFIG_usbtty=1
spear600_nand :
+ u-boot.cfg: CONFIG_NAND=1
- u-boot.cfg: CONFIG_nand=1 CONFIG_spear600=1
+ all: CONFIG_NAND=1
- all: CONFIG_nand=1 CONFIG_spear600=1
spear300_nand :
+ u-boot.cfg: CONFIG_ENV_ADDR=(CONFIG_SYS_FLASH_BASE +
CONFIG_SYS_MONITOR_LEN) CONFIG_ENV_IS_IN_FLASH=1
CONFIG_ENV_SECT_SIZE=0x00010000 CONFIG_NAND=1
CONFIG_SYS_MONITOR_LEN=0x00040000
- u-boot.cfg: CONFIG_ENV_IS_IN_NAND=1 CONFIG_ENV_OFFSET=0x60000
CONFIG_ENV_RANGE=0x10000 CONFIG_nand=1 CONFIG_spear300=1
+ all: CONFIG_ENV_ADDR=(CONFIG_SYS_FLASH_BASE +
CONFIG_SYS_MONITOR_LEN) CONFIG_ENV_IS_IN_FLASH=1
CONFIG_ENV_SECT_SIZE=0x00010000 CONFIG_NAND=1
CONFIG_SYS_MONITOR_LEN=0x00040000
- all: CONFIG_ENV_IS_IN_NAND=1 CONFIG_ENV_OFFSET=0x60000
CONFIG_ENV_RANGE=0x10000 CONFIG_nand=1 CONFIG_spear300=1
am43xx_evm_usbhost_boot :
- u-boot.cfg: CONFIG_SPL_NET_VCI_STRING="AM43xx U-Boot SPL"
- u-boot-spl.cfg: CONFIG_SPL_NET_VCI_STRING="AM43xx U-Boot SPL"
- all: CONFIG_SPL_NET_VCI_STRING="AM43xx U-Boot SPL"
am335x_evm_usbspl :
+ u-boot.cfg: CONFIG_SPL_ENV_SUPPORT=1 CONFIG_SPL_NET_SUPPORT=1
CONFIG_SPL_NET_VCI_STRING=""
+ u-boot-spl.cfg: CONFIG_SPL_MMC_SUPPORT=1
CONFIG_SPL_NAND_SUPPORT=1 CONFIG_SPL_YMODEM_SUPPORT=1
+ all: CONFIG_SPL_ENV_SUPPORT=1 CONFIG_SPL_MMC_SUPPORT=1
CONFIG_SPL_NAND_SUPPORT=1 CONFIG_SPL_NET_SUPPORT=1
CONFIG_SPL_NET_VCI_STRING="" CONFIG_SPL_YMODEM_SUPPORT=1
spear320_usbtty_nand :
+ u-boot.cfg: CONFIG_ENV_ADDR=(CONFIG_SYS_FLASH_BASE +
CONFIG_SYS_MONITOR_LEN) CONFIG_ENV_IS_IN_FLASH=1
CONFIG_ENV_SECT_SIZE=0x00010000 CONFIG_NAND=1
CONFIG_SYS_MONITOR_LEN=0x00040000 CONFIG_USBTTY=1
- u-boot.cfg: CONFIG_DW_UDC=1 CONFIG_ENV_IS_IN_NAND=1
CONFIG_ENV_OFFSET=0x60000 CONFIG_ENV_RANGE=0x10000
CONFIG_SPEAR_USBTTY=1 CONFIG_USBD_HS=1 CONFIG_USBD_MANUFACTURER="ST
Microelectronics" CONFIG_USBD_PRODUCT_NAME="SPEAr SoC"
CONFIG_USB_DEVICE=1 CONFIG_USB_TTY=1 CONFIG_nand=1 CONFIG_spear320=1
CONFIG_usbtty=1
+ all: CONFIG_ENV_ADDR=(CONFIG_SYS_FLASH_BASE +
CONFIG_SYS_MONITOR_LEN) CONFIG_ENV_IS_IN_FLASH=1
CONFIG_ENV_SECT_SIZE=0x00010000 CONFIG_NAND=1
CONFIG_SYS_MONITOR_LEN=0x00040000 CONFIG_USBTTY=1
- all: CONFIG_DW_UDC=1 CONFIG_ENV_IS_IN_NAND=1
CONFIG_ENV_OFFSET=0x60000 CONFIG_ENV_RANGE=0x10000
CONFIG_SPEAR_USBTTY=1 CONFIG_USBD_HS=1 CONFIG_USBD_MANUFACTURER="ST
Microelectronics" CONFIG_USBD_PRODUCT_NAME="SPEAr SoC"
CONFIG_USB_DEVICE=1 CONFIG_USB_TTY=1 CONFIG_nand=1 CONFIG_spear320=1
CONFIG_usbtty=1
am43xx_evm_ethboot :
+ u-boot.cfg: CONFIG_SPL_NET_SUPPORT=1
+ all: CONFIG_SPL_NET_SUPPORT=1
spear310_usbtty_nand :
+ u-boot.cfg: CONFIG_ENV_ADDR=(CONFIG_SYS_FLASH_BASE +
CONFIG_SYS_MONITOR_LEN) CONFIG_ENV_IS_IN_FLASH=1
CONFIG_ENV_SECT_SIZE=0x00010000 CONFIG_NAND=1
CONFIG_SYS_MONITOR_LEN=0x00040000 CONFIG_USBTTY=1
- u-boot.cfg: CONFIG_DW_UDC=1 CONFIG_ENV_IS_IN_NAND=1
CONFIG_ENV_OFFSET=0x60000 CONFIG_ENV_RANGE=0x10000
CONFIG_SPEAR_USBTTY=1 CONFIG_USBD_HS=1 CONFIG_USBD_MANUFACTURER="ST
Microelectronics" CONFIG_USBD_PRODUCT_NAME="SPEAr SoC"
CONFIG_USB_DEVICE=1 CONFIG_USB_TTY=1 CONFIG_nand=1 CONFIG_spear310=1
CONFIG_usbtty=1
+ all: CONFIG_ENV_ADDR=(CONFIG_SYS_FLASH_BASE +
CONFIG_SYS_MONITOR_LEN) CONFIG_ENV_IS_IN_FLASH=1
CONFIG_ENV_SECT_SIZE=0x00010000 CONFIG_NAND=1
CONFIG_SYS_MONITOR_LEN=0x00040000 CONFIG_USBTTY=1
- all: CONFIG_DW_UDC=1 CONFIG_ENV_IS_IN_NAND=1
CONFIG_ENV_OFFSET=0x60000 CONFIG_ENV_RANGE=0x10000
CONFIG_SPEAR_USBTTY=1 CONFIG_USBD_HS=1 CONFIG_USBD_MANUFACTURER="ST
Microelectronics" CONFIG_USBD_PRODUCT_NAME="SPEAr SoC"
CONFIG_USB_DEVICE=1 CONFIG_USB_TTY=1 CONFIG_nand=1 CONFIG_spear310=1
CONFIG_usbtty=1
spear310_usbtty spear310_usbtty_pnor :
+ u-boot.cfg: CONFIG_USBTTY=1
- u-boot.cfg: CONFIG_DW_UDC=1 CONFIG_SPEAR_USBTTY=1
CONFIG_USBD_HS=1 CONFIG_USBD_MANUFACTURER="ST Microelectronics"
CONFIG_USBD_PRODUCT_NAME="SPEAr SoC" CONFIG_USB_DEVICE=1
CONFIG_USB_TTY=1 CONFIG_spear310=1 CONFIG_usbtty=1
+ all: CONFIG_USBTTY=1
- all: CONFIG_DW_UDC=1 CONFIG_SPEAR_USBTTY=1 CONFIG_USBD_HS=1
CONFIG_USBD_MANUFACTURER="ST Microelectronics"
CONFIG_USBD_PRODUCT_NAME="SPEAr SoC" CONFIG_USB_DEVICE=1
CONFIG_USB_TTY=1 CONFIG_spear310=1 CONFIG_usbtty=1
spear300 :
- u-boot.cfg: CONFIG_spear300=1
- all: CONFIG_spear300=1
spear600_usbtty :
+ u-boot.cfg: CONFIG_USBTTY=1
- u-boot.cfg: CONFIG_spear600=1 CONFIG_usbtty=1
+ all: CONFIG_USBTTY=1
- all: CONFIG_spear600=1 CONFIG_usbtty=1
spear320_nand :
+ u-boot.cfg: CONFIG_ENV_ADDR=(CONFIG_SYS_FLASH_BASE +
CONFIG_SYS_MONITOR_LEN) CONFIG_ENV_IS_IN_FLASH=1
CONFIG_ENV_SECT_SIZE=0x00010000 CONFIG_NAND=1
CONFIG_SYS_MONITOR_LEN=0x00040000
- u-boot.cfg: CONFIG_ENV_IS_IN_NAND=1 CONFIG_ENV_OFFSET=0x60000
CONFIG_ENV_RANGE=0x10000 CONFIG_nand=1 CONFIG_spear320=1
+ all: CONFIG_ENV_ADDR=(CONFIG_SYS_FLASH_BASE +
CONFIG_SYS_MONITOR_LEN) CONFIG_ENV_IS_IN_FLASH=1
CONFIG_ENV_SECT_SIZE=0x00010000 CONFIG_NAND=1
CONFIG_SYS_MONITOR_LEN=0x00040000
- all: CONFIG_ENV_IS_IN_NAND=1 CONFIG_ENV_OFFSET=0x60000
CONFIG_ENV_RANGE=0x10000 CONFIG_nand=1 CONFIG_spear320=1
stv0991 :
+ u-boot.cfg: CONFIG_STV0991=1
- u-boot.cfg: CONFIG_stv0991=1
+ all: CONFIG_STV0991=1
- all: CONFIG_stv0991=1
spear320 spear320_pnor :
- u-boot.cfg: CONFIG_spear320=1
- all: CONFIG_spear320=1
spear310_nand :
+ u-boot.cfg: CONFIG_ENV_ADDR=(CONFIG_SYS_FLASH_BASE +
CONFIG_SYS_MONITOR_LEN) CONFIG_ENV_IS_IN_FLASH=1
CONFIG_ENV_SECT_SIZE=0x00010000 CONFIG_NAND=1
CONFIG_SYS_MONITOR_LEN=0x00040000
- u-boot.cfg: CONFIG_ENV_IS_IN_NAND=1 CONFIG_ENV_OFFSET=0x60000
CONFIG_ENV_RANGE=0x10000 CONFIG_nand=1 CONFIG_spear310=1
+ all: CONFIG_ENV_ADDR=(CONFIG_SYS_FLASH_BASE +
CONFIG_SYS_MONITOR_LEN) CONFIG_ENV_IS_IN_FLASH=1
CONFIG_ENV_SECT_SIZE=0x00010000 CONFIG_NAND=1
CONFIG_SYS_MONITOR_LEN=0x00040000
- all: CONFIG_ENV_IS_IN_NAND=1 CONFIG_ENV_OFFSET=0x60000
CONFIG_ENV_RANGE=0x10000 CONFIG_nand=1 CONFIG_spear310=1
spear300_usbtty :
+ u-boot.cfg: CONFIG_USBTTY=1
- u-boot.cfg: CONFIG_DW_UDC=1 CONFIG_SPEAR_USBTTY=1
CONFIG_USBD_HS=1 CONFIG_USBD_MANUFACTURER="ST Microelectronics"
CONFIG_USBD_PRODUCT_NAME="SPEAr SoC" CONFIG_USB_DEVICE=1
CONFIG_USB_TTY=1 CONFIG_spear300=1 CONFIG_usbtty=1
+ all: CONFIG_USBTTY=1
- all: CONFIG_DW_UDC=1 CONFIG_SPEAR_USBTTY=1 CONFIG_USBD_HS=1
CONFIG_USBD_MANUFACTURER="ST Microelectronics"
CONFIG_USBD_PRODUCT_NAME="SPEAr SoC" CONFIG_USB_DEVICE=1
CONFIG_USB_TTY=1 CONFIG_spear300=1 CONFIG_usbtty=1
spear600 :
- u-boot.cfg: CONFIG_spear600=1
- all: CONFIG_spear600=1
spear300_usbtty_nand :
+ u-boot.cfg: CONFIG_ENV_ADDR=(CONFIG_SYS_FLASH_BASE +
CONFIG_SYS_MONITOR_LEN) CONFIG_ENV_IS_IN_FLASH=1
CONFIG_ENV_SECT_SIZE=0x00010000 CONFIG_NAND=1
CONFIG_SYS_MONITOR_LEN=0x00040000 CONFIG_USBTTY=1
- u-boot.cfg: CONFIG_DW_UDC=1 CONFIG_ENV_IS_IN_NAND=1
CONFIG_ENV_OFFSET=0x60000 CONFIG_ENV_RANGE=0x10000
CONFIG_SPEAR_USBTTY=1 CONFIG_USBD_HS=1 CONFIG_USBD_MANUFACTURER="ST
Microelectronics" CONFIG_USBD_PRODUCT_NAME="SPEAr SoC"
CONFIG_USB_DEVICE=1 CONFIG_USB_TTY=1 CONFIG_nand=1 CONFIG_spear300=1
CONFIG_usbtty=1
+ all: CONFIG_ENV_ADDR=(CONFIG_SYS_FLASH_BASE +
CONFIG_SYS_MONITOR_LEN) CONFIG_ENV_IS_IN_FLASH=1
CONFIG_ENV_SECT_SIZE=0x00010000 CONFIG_NAND=1
CONFIG_SYS_MONITOR_LEN=0x00040000 CONFIG_USBTTY=1
- all: CONFIG_DW_UDC=1 CONFIG_ENV_IS_IN_NAND=1
CONFIG_ENV_OFFSET=0x60000 CONFIG_ENV_RANGE=0x10000
CONFIG_SPEAR_USBTTY=1 CONFIG_USBD_HS=1 CONFIG_USBD_MANUFACTURER="ST
Microelectronics" CONFIG_USBD_PRODUCT_NAME="SPEAr SoC"
CONFIG_USB_DEVICE=1 CONFIG_USB_TTY=1 CONFIG_nand=1 CONFIG_spear300=1
CONFIG_usbtty=1
spear310 spear310_pnor :
- u-boot.cfg: CONFIG_spear310=1
- all: CONFIG_spear310=1
spear600_usbtty_nand :
+ u-boot.cfg: CONFIG_NAND=1 CONFIG_USBTTY=1
- u-boot.cfg: CONFIG_nand=1 CONFIG_spear600=1 CONFIG_usbtty=1
+ all: CONFIG_NAND=1 CONFIG_USBTTY=1
- all: CONFIG_nand=1 CONFIG_spear600=1 CONFIG_usbtty=1
I don't see anything with xtensa. buildman -sS seems happy, and:
$ ls -l ../kc4-conf/01_of_46_g0eb43efbf341e1637f4c5f40ff4afee812d2382c_buildman/xtfpga/
total 180
-rw-r----- 1 sjg eng 2441 Sep 13 12:35 autoconf.h
-rw-r----- 1 sjg eng 3242 Sep 13 12:35 autoconf.mk
-rw-r----- 1 sjg eng 18683 Sep 13 12:34 autoconf-spl.mk
-rw-r----- 1 sjg eng 18961 Sep 13 12:34 autoconf-tpl.mk
-rw-r----- 1 sjg eng 1 Sep 13 12:35 done
-rw-r----- 1 sjg eng 0 Sep 13 12:35 log
-rw-r----- 1 sjg eng 56 Sep 13 12:35 sizes
-rw-r----- 1 sjg eng 190 Sep 13 12:35 toolchain
-rw-r----- 1 sjg eng 26156 Sep 13 12:35 u-boot.cfg
-rw-r----- 1 sjg eng 3097 Sep 13 12:35 u-boot.objdump
-rw-r----- 1 sjg eng 29268 Sep 13 12:35 u-boot.sizes
-rw-r----- 1 sjg eng 27632 Sep 13 12:34 u-boot-spl.cfg
-rw-r----- 1 sjg eng 28141 Sep 13 12:34 u-boot-tpl.cfg
$ ls -l ../kc4-conf/46_of_46_g96f50085eba4631013e7a5774d8da26c25e72d60_Convert-CONFIG_SPL_Y/xtfpga/
total 180
-rw-r----- 1 sjg eng 2441 Sep 13 12:35 autoconf.h
-rw-r----- 1 sjg eng 3242 Sep 13 12:35 autoconf.mk
-rw-r----- 1 sjg eng 18683 Sep 13 12:34 autoconf-spl.mk
-rw-r----- 1 sjg eng 18961 Sep 13 12:34 autoconf-tpl.mk
-rw-r----- 1 sjg eng 1 Sep 13 12:35 done
-rw-r----- 1 sjg eng 0 Sep 13 12:35 log
-rw-r----- 1 sjg eng 56 Sep 13 12:35 sizes
-rw-r----- 1 sjg eng 190 Sep 13 12:35 toolchain
-rw-r----- 1 sjg eng 26156 Sep 13 12:35 u-boot.cfg
-rw-r----- 1 sjg eng 3097 Sep 13 12:35 u-boot.objdump
-rw-r----- 1 sjg eng 29268 Sep 13 12:35 u-boot.sizes
-rw-r----- 1 sjg eng 27632 Sep 13 12:34 u-boot-spl.cfg
-rw-r----- 1 sjg eng 28141 Sep 13 12:34 u-boot-tpl.cfg
This is for the SPL patches only, not the follow-on series (two
config-check patches).
Any ideas?
Regards,
Simon
More information about the U-Boot
mailing list