[U-Boot] [PATCH v1 3/3] arm: mvebu: NAND support for DB-88F6820-AMC

Chris Packham judge.packham at gmail.com
Wed Sep 14 03:42:43 CEST 2016


Enable the NAND interface on this board.

Signed-off-by: Chris Packham <judge.packham at gmail.com>
---

 arch/arm/dts/armada-385-amc.dts  | 8 ++++++++
 configs/db-88f6820-amc_defconfig | 2 ++
 include/configs/db-88f6820-amc.h | 4 ++++
 3 files changed, 14 insertions(+)

diff --git a/arch/arm/dts/armada-385-amc.dts b/arch/arm/dts/armada-385-amc.dts
index 858138a3376b..a5a8a7f186db 100644
--- a/arch/arm/dts/armada-385-amc.dts
+++ b/arch/arm/dts/armada-385-amc.dts
@@ -120,6 +120,14 @@
 					reg = <0>;
 				};
 			};
+
+			flash at d0000 {
+				status = "okay";
+				num-cs = <1>;
+				marvell,nand-keep-config;
+				marvell,nand-enable-arbiter;
+				nand-on-flash-bbt;
+			};
 		};
 
 		pcie-controller {
diff --git a/configs/db-88f6820-amc_defconfig b/configs/db-88f6820-amc_defconfig
index 74794fed4766..9a6cf4767d92 100644
--- a/configs/db-88f6820-amc_defconfig
+++ b/configs/db-88f6820-amc_defconfig
@@ -7,6 +7,7 @@ CONFIG_SPL=y
 CONFIG_BOOTDELAY=3
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
+CONFIG_CMD_NAND=y
 CONFIG_CMD_SF=y
 CONFIG_CMD_SPI=y
 CONFIG_CMD_I2C=y
@@ -23,6 +24,7 @@ CONFIG_CMD_EXT4=y
 CONFIG_CMD_FAT=y
 CONFIG_CMD_FS_GENERIC=y
 CONFIG_SPL_OF_TRANSLATE=y
+CONFIG_NAND_PXA3XX=y
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_BAR=y
 CONFIG_SPI_FLASH_MACRONIX=y
diff --git a/include/configs/db-88f6820-amc.h b/include/configs/db-88f6820-amc.h
index b9cb243e402d..97c51c91d9bb 100644
--- a/include/configs/db-88f6820-amc.h
+++ b/include/configs/db-88f6820-amc.h
@@ -68,6 +68,10 @@
 #define CONFIG_PCI_SCAN_SHOW
 #endif
 
+/* NAND */
+#define CONFIG_SYS_NAND_USE_FLASH_BBT
+#define CONFIG_SYS_NAND_ONFI_DETECTION
+
 #define CONFIG_SYS_CONSOLE_INFO_QUIET	/* don't print console @ startup */
 #define CONFIG_SYS_ALT_MEMTEST
 
-- 
2.9.2.518.ged577c6.dirty



More information about the U-Boot mailing list