[U-Boot] [PATCH] eth: asix88179: Reset device during probe with DM_ETH enabled

[Simon Glass]

Hi,

On 30 August 2016 at 08:01, Nikolaus Schulz
<nikolaus.schulz at avionic-design.de> wrote:
> With the ethernet driver model enabled, reset the device before reading
> the MAC address, just like it's done for the non-device-model code path.
> This avoids a timeout when the interface is first used.
>
> Signed-off-by: Nikolaus Schulz <nikolaus.schulz at avionic-design.de>
> ---
>  drivers/usb/eth/asix88179.c | 4 ++++
>  1 file changed, 4 insertions(+)
>
> diff --git a/drivers/usb/eth/asix88179.c b/drivers/usb/eth/asix88179.c
> index 7548269..0725940 100644
> --- a/drivers/usb/eth/asix88179.c
> +++ b/drivers/usb/eth/asix88179.c
> @@ -878,6 +878,10 @@ static int ax88179_eth_probe(struct udevice *dev)
>         usb_dev = priv->ueth.pusb_dev;
>         priv->maxpacketsize = usb_dev->epmaxpacketout[AX_ENDPOINT_OUT];
>
> +       ret = asix_basic_reset(&priv->ueth, priv);
> +       if (ret)
> +               return ret;
> +
>         /* Get the MAC address */
>         ret = asix_read_mac(&priv->ueth, pdata->enetaddr);
>         if (ret)

How come this doesn't happen in ax88179_eth_start()?

> --
> 2.1.4
>

Regards,
Simon