[U-Boot] [PATCH v3 03/14] MIPS: Probe cache line sizes once during boot
Paul Burton
paul.burton at imgtec.com
Wed Sep 21 12:18:48 CEST 2016
Rather than probing the cache line sizes on every call of any cache
maintenance function, probe them once during boot & store the values in
the global data structure for later use. This will reduce the overhead
of the cache maintenance functions, which isn't a big deal yet but
becomes more important once L2 caches which may expose their properties
via coprocessor 2 or the CM are supported.
Signed-off-by: Paul Burton <paul.burton at imgtec.com>
---
Changes in v3: None
Changes in v2: None
arch/mips/cpu/cpu.c | 7 ++++++
arch/mips/include/asm/cache.h | 9 ++++++++
arch/mips/include/asm/global_data.h | 4 ++++
arch/mips/lib/cache.c | 43 +++++++++++++++++++++----------------
4 files changed, 45 insertions(+), 18 deletions(-)
diff --git a/arch/mips/cpu/cpu.c b/arch/mips/cpu/cpu.c
index 391feb3..1b919ed 100644
--- a/arch/mips/cpu/cpu.c
+++ b/arch/mips/cpu/cpu.c
@@ -8,6 +8,7 @@
#include <common.h>
#include <command.h>
#include <linux/compiler.h>
+#include <asm/cache.h>
#include <asm/mipsregs.h>
#include <asm/reboot.h>
@@ -35,3 +36,9 @@ void write_one_tlb(int index, u32 pagemask, u32 hi, u32 low0, u32 low1)
write_c0_index(index);
tlb_write_indexed();
}
+
+int arch_cpu_init(void)
+{
+ mips_cache_probe();
+ return 0;
+}
diff --git a/arch/mips/include/asm/cache.h b/arch/mips/include/asm/cache.h
index 0cea581..669c362 100644
--- a/arch/mips/include/asm/cache.h
+++ b/arch/mips/include/asm/cache.h
@@ -19,4 +19,13 @@
*/
#define CONFIG_SYS_CACHELINE_SIZE ARCH_DMA_MINALIGN
+/**
+ * mips_cache_probe() - Probe the properties of the caches
+ *
+ * Call this to probe the properties such as line sizes of the caches
+ * present in the system, if any. This must be done before cache maintenance
+ * functions such as flush_cache may be called.
+ */
+void mips_cache_probe(void);
+
#endif /* __MIPS_CACHE_H__ */
diff --git a/arch/mips/include/asm/global_data.h b/arch/mips/include/asm/global_data.h
index 37f8ed5..8533b69 100644
--- a/arch/mips/include/asm/global_data.h
+++ b/arch/mips/include/asm/global_data.h
@@ -21,6 +21,10 @@ struct arch_global_data {
unsigned long rev;
unsigned long ver;
#endif
+#ifdef CONFIG_SYS_CACHE_SIZE_AUTO
+ unsigned short l1i_line_size;
+ unsigned short l1d_line_size;
+#endif
};
#include <asm-generic/global_data.h>
diff --git a/arch/mips/lib/cache.c b/arch/mips/lib/cache.c
index db81953..d8baf08 100644
--- a/arch/mips/lib/cache.c
+++ b/arch/mips/lib/cache.c
@@ -9,32 +9,39 @@
#include <asm/cacheops.h>
#include <asm/mipsregs.h>
-static inline unsigned long icache_line_size(void)
-{
- unsigned long conf1, il;
+DECLARE_GLOBAL_DATA_PTR;
- if (!config_enabled(CONFIG_SYS_CACHE_SIZE_AUTO))
- return CONFIG_SYS_ICACHE_LINE_SIZE;
+void mips_cache_probe(void)
+{
+#ifdef CONFIG_SYS_CACHE_SIZE_AUTO
+ unsigned long conf1, il, dl;
conf1 = read_c0_config1();
+
il = (conf1 & MIPS_CONF1_IL) >> MIPS_CONF1_IL_SHF;
- if (!il)
- return 0;
- return 2 << il;
+ dl = (conf1 & MIPS_CONF1_DL) >> MIPS_CONF1_DL_SHF;
+
+ gd->arch.l1i_line_size = il ? (2 << il) : 0;
+ gd->arch.l1d_line_size = dl ? (2 << dl) : 0;
+#endif
}
-static inline unsigned long dcache_line_size(void)
+static inline unsigned long icache_line_size(void)
{
- unsigned long conf1, dl;
-
- if (!config_enabled(CONFIG_SYS_CACHE_SIZE_AUTO))
- return CONFIG_SYS_DCACHE_LINE_SIZE;
+#ifdef CONFIG_SYS_CACHE_SIZE_AUTO
+ return gd->arch.l1i_line_size;
+#else
+ return CONFIG_SYS_ICACHE_LINE_SIZE;
+#endif
+}
- conf1 = read_c0_config1();
- dl = (conf1 & MIPS_CONF1_DL) >> MIPS_CONF1_DL_SHF;
- if (!dl)
- return 0;
- return 2 << dl;
+static inline unsigned long dcache_line_size(void)
+{
+#ifdef CONFIG_SYS_CACHE_SIZE_AUTO
+ return gd->arch.l1d_line_size;
+#else
+ return CONFIG_SYS_DCACHE_LINE_SIZE;
+#endif
}
#define cache_loop(start, end, lsize, ops...) do { \
--
2.10.0
More information about the U-Boot
mailing list