[U-Boot] [PATCH v3] fsl-ifc-nand : Corrected the programming of chip select
Matt Weber
matthew.weber at rockwellcollins.com
Tue Sep 27 04:48:09 CEST 2016
Corrected the chip selection in IFC_NAND_CSEL register. Due to this
issue in multi-chip nand use-case, IFC was always pointing to the last
probed chip even though the user select another device through "nand
device <dev>" command.
Also, remove the usage of ifc_ctrl->cs_nand from driver as chipselect
is a property of the chip not the controller.
Signed-off-by: Matthew Weber <matthew.weber at rockwellcollins.com>
Signed-off-by: Ronak Desai <ronak.desai at rockwellcollins.com>
--
v1 -> v2
[ Scott W
- Update fsl_ifc_sram_init() with correct csel and
cs_nand removed.
v2 -> v3
[ Prabhakar
- Remove braces around if in fsl_ifc_chip_init()
---
drivers/mtd/nand/fsl_ifc_nand.c | 16 +++++++---------
1 file changed, 7 insertions(+), 9 deletions(-)
diff --git a/drivers/mtd/nand/fsl_ifc_nand.c b/drivers/mtd/nand/fsl_ifc_nand.c
index bc6bdc9..990b698 100644
--- a/drivers/mtd/nand/fsl_ifc_nand.c
+++ b/drivers/mtd/nand/fsl_ifc_nand.c
@@ -48,7 +48,7 @@ struct fsl_ifc_ctrl {
/* device info */
struct fsl_ifc regs;
void __iomem *addr; /* Address of assigned IFC buffer */
- unsigned int cs_nand; /* On which chipsel NAND is connected */
+ unsigned int cs_nand; /* On which chipsel NAND is connected */
unsigned int page; /* Last page written to / read from */
unsigned int read_bytes; /* Number of bytes read during command */
unsigned int column; /* Saved column from SEQIN */
@@ -296,7 +296,7 @@ static int fsl_ifc_run_command(struct mtd_info *mtd)
int i;
/* set the chip select for NAND Transaction */
- ifc_out32(&ifc->ifc_nand.nand_csel, ifc_ctrl->cs_nand);
+ ifc_out32(&ifc->ifc_nand.nand_csel, priv->bank << IFC_NAND_CSEL_SHIFT);
/* start read/write seq */
ifc_out32(&ifc->ifc_nand.nandseq_strt,
@@ -798,7 +798,7 @@ static void fsl_ifc_select_chip(struct mtd_info *mtd, int chip)
{
}
-static int fsl_ifc_sram_init(uint32_t ver)
+static int fsl_ifc_sram_init(uint32_t ver, struct fsl_ifc_mtd *priv)
{
struct fsl_ifc_runtime *ifc = ifc_ctrl->regs.rregs;
uint32_t cs = 0, csor = 0, csor_8k = 0, csor_ext = 0;
@@ -823,7 +823,7 @@ static int fsl_ifc_sram_init(uint32_t ver)
return 1;
}
- cs = ifc_ctrl->cs_nand >> IFC_NAND_CSEL_SHIFT;
+ cs = priv->bank;
/* Save CSOR and CSOR_ext */
csor = ifc_in32(&ifc_ctrl->regs.gregs->csor_cs[cs].csor);
@@ -850,7 +850,7 @@ static int fsl_ifc_sram_init(uint32_t ver)
ifc_out32(&ifc->ifc_nand.col0, 0x0);
/* set the chip select for NAND Transaction */
- ifc_out32(&ifc->ifc_nand.nand_csel, ifc_ctrl->cs_nand);
+ ifc_out32(&ifc->ifc_nand.nand_csel, priv->bank << IFC_NAND_CSEL_SHIFT);
/* start read seq */
ifc_out32(&ifc->ifc_nand.nandseq_strt, IFC_NAND_SEQ_STRT_FIR_STRT);
@@ -911,10 +911,8 @@ static int fsl_ifc_chip_init(int devnum, u8 *addr)
csor = ifc_in32(&gregs->csor_cs[priv->bank].csor);
if ((cspr & CSPR_V) && (cspr & CSPR_MSEL) == CSPR_MSEL_NAND &&
- (cspr & CSPR_BA) == CSPR_PHYS_ADDR(phys_addr)) {
- ifc_ctrl->cs_nand = priv->bank << IFC_NAND_CSEL_SHIFT;
+ (cspr & CSPR_BA) == CSPR_PHYS_ADDR(phys_addr))
break;
- }
}
if (priv->bank >= MAX_BANKS) {
@@ -1029,7 +1027,7 @@ static int fsl_ifc_chip_init(int devnum, u8 *addr)
ver = ifc_in32(&gregs->ifc_rev);
if (ver >= FSL_IFC_V1_1_0)
- ret = fsl_ifc_sram_init(ver);
+ ret = fsl_ifc_sram_init(ver, priv);
if (ret)
return ret;
--
1.9.1
More information about the U-Boot
mailing list