[U-Boot] [PATCH 3/3] igep00x0: add Hynix timings

[Ladislav Michl]

Tested on IGEPv2 with Micron MT29F4G16ABBDA3W and
Hynix H27S4G6F2DKA-BM

Signed-off-by: Ladislav Michl <ladis at linux-mips.org>
---
 board/isee/igep00x0/igep00x0.c | 20 ++++++++++++++++----
 1 file changed, 16 insertions(+), 4 deletions(-)

diff --git a/board/isee/igep00x0/igep00x0.c b/board/isee/igep00x0/igep00x0.c
index 71688cc..669f3dd 100644
--- a/board/isee/igep00x0/igep00x0.c
+++ b/board/isee/igep00x0/igep00x0.c
@@ -84,10 +84,22 @@ void get_board_mem_timings(struct board_sdrc_timings *timings)
 	int mfr, id, err = identify_nand_chip(&mfr, &id);
 
 	timings->mr = MICRON_V_MR_165;
-	if (!err && mfr == NAND_MFR_MICRON) {
-		timings->mcfg = MICRON_V_MCFG_200(256 << 20);
-		timings->ctrla = MICRON_V_ACTIMA_200;
-		timings->ctrlb = MICRON_V_ACTIMB_200;
+	if (!err) {
+		switch (mfr) {
+		case NAND_MFR_HYNIX:
+			timings->mcfg = HYNIX_V_MCFG_200(256 << 20);
+			timings->ctrla = HYNIX_V_ACTIMA_200;
+			timings->ctrlb = HYNIX_V_ACTIMB_200;
+			break;
+		case NAND_MFR_MICRON:
+			timings->mcfg = MICRON_V_MCFG_200(256 << 20);
+			timings->ctrla = MICRON_V_ACTIMA_200;
+			timings->ctrlb = MICRON_V_ACTIMB_200;
+			break;
+		default:
+			/* Should not happen... */
+			break;
+		}
 		timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz;
 		gpmc_cs0_flash = MTD_DEV_TYPE_NAND;
 	} else {
-- 
2.1.4