[U-Boot] [PATCH v2 6/7] doc: Updates info on using keystone secure devices from TI
Madan Srinivas
madans at ti.com
Thu Sep 1 07:04:41 CEST 2016
Add a section describing the secure boot image used on
keystone secure devices.
This patch applies on top of the patch
doc: Update info on using AM33xx secure devices from TI
submitted by Andrew Davis
Signed-off-by: Madan Srinivas <madans at ti.com>
---
Changes in v2:
- Updates the secure keystone image name to u-boot_HS_MLO
in README.ti-secure to match with the changes made to
config.mk in this series version.
doc/README.ti-secure | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/doc/README.ti-secure b/doc/README.ti-secure
index 9b0fbf9..84c7206 100644
--- a/doc/README.ti-secure
+++ b/doc/README.ti-secure
@@ -133,6 +133,26 @@ Booting of U-Boot SPL
u-boot-spl_HS_X-LOADER - boot image for all other flash memories
including QSPI and NOR flash
+ Invoking the script for Keystone Secure Devices
+ =============================================
+
+ create-boot-image.sh \
+ <UNUSED> <INPUT_FILE> <OUTPUT_FILE> <UNUSED>
+
+ <UNUSED> is currently ignored and reserved for future use.
+
+ <INPUT_FILE> is the full path and filename of the public world boot
+ loader binary file (only u-boot.bin is currently supported on
+ keystone devices, u-boot-spl.bin is not currently supported).
+
+ <OUTPUT_FILE> is the full path and filename of the final secure
+ image. The output binary images should be used in place of the standard
+ non-secure binary images (see the platform-specific user's guides and
+ releases notes for how the non-secure images are typically used)
+ u-boot_HS_MLO - signed and encrypted boot image that can
+ be used to boot from all media. Secure boot from SPI NOR
+ flash is not currently supported.
+
Booting of Primary U-Boot (u-boot.img)
======================================
--
2.7.4
More information about the U-Boot
mailing list