[U-Boot] [PATCH] fsl-ifc-nand : Corrected the programming of chip select
Ronak Desai
ronak.desai at rockwellcollins.com
Tue Sep 6 21:31:41 CEST 2016
We don't need to update fsl_ifc_sram_init() as fsl_ifc_sram_init is called
from the fsl_ifc_chip_init which configures the ifc_ctrl->cs_nand
with correct value based on the chip-select under initialization.
Best Regards,
Ronak Desai
On Tue, Sep 6, 2016 at 12:01 PM, Scott Wood <scott.wood at nxp.com> wrote:
> On 09/06/2016 08:44 AM, Matt Weber wrote:
> > Corrected the chip selection in IFC_NAND_CSEL register. Due to this
> > issue in multi-chip nand use-case, IFC was always pointing to the last
> > probed chip even though the user select another device through "nand
> > device" command.
> >
> > Signed-off-by: Ronak Desai <ronak.desai at rockwellcollins.com>
> > Signed-off-by: Matthew Weber <matthew.weber at rockwellcollins.com>
> > ---
> > drivers/mtd/nand/fsl_ifc_nand.c | 2 +-
> > 1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/drivers/mtd/nand/fsl_ifc_nand.c b/drivers/mtd/nand/fsl_ifc_
> nand.c
> > index 7001cbd..2ce4a7d 100644
> > --- a/drivers/mtd/nand/fsl_ifc_nand.c
> > +++ b/drivers/mtd/nand/fsl_ifc_nand.c
> > @@ -296,7 +296,7 @@ static int fsl_ifc_run_command(struct mtd_info *mtd)
> > int i;
> >
> > /* set the chip select for NAND Transaction */
> > - ifc_out32(&ifc->ifc_nand.nand_csel, ifc_ctrl->cs_nand);
> > + ifc_out32(&ifc->ifc_nand.nand_csel, priv->bank <<
> IFC_NAND_CSEL_SHIFT);
> >
> > /* start read/write seq */
> > ifc_out32(&ifc->ifc_nand.nandseq_strt,
>
> Ouch. fsl_ifc_sram_init() should also be updated and cs_nand removed.
>
> -Scott
>
>
More information about the U-Boot
mailing list