[U-Boot] [PULL] Resend: Please pull u-boot-imx
Stefano Babic
sbabic at denx.de
Tue Sep 6 18:54:52 CEST 2016
Hi Tom,
apart of patches that I should put to -next and not in -master, there
was something wrong in my tree. I had to rebase it (sorry for that..)
and I moved all new features into -next. Just bug fixes remain, with the
exception of:
Akshay Bhat (1):
arm: imx: Add support for Advantech DMS-BA16 board
I applied this one month ago, I do not know why it was slipped in
previous PR.
-master builds clean - I will check then in -next the breakage. Sorry
for inconvenience.
The following changes since commit b615267633996a9410a88b54a55965d8b021f6f8:
ARM: tegra: Add support for TK1-SOM board from Colorado Engineering
(2016-09-01 09:24:30 -0700)
are available in the git repository at:
git://www.denx.de/git/u-boot-imx.git master
for you to fetch changes up to d4ee5043f36e7a418c3fb5be2e76eb5f6ee2cd9f:
warp7: Print secure/non-secure mode info (2016-09-06 18:22:48 +0200)
----------------------------------------------------------------
Akshay Bhat (1):
arm: imx: Add support for Advantech DMS-BA16 board
Breno Lima (1):
warp7: Modify fdt_file environment variable
Christopher Spinrath (1):
ARM: board: cm_fx6: fix mtd partition fixup
Eric Nelson (1):
mx6ul_14x14_evk: don't use array for SD2 card detect pad
Fabio Estevam (12):
mx7dsabresd: Print secure/non-secure mode info
warp: Fix RAM size runtime detection
pico-imx6ul: Directly write to register LDOGCTL
mx7dsabresd: Directly write to register LDOGCTL
mx7dsabresd: Directly write to register LDOGCTL
mx6: ddr: Allow changing REFSEL and REFR fields
mx6ul_14x14_evk: Pass refsel and refr fields to avoid hang
mx6ul_14x14_evk: Adjust SPL DDR3 settings
mx6ul_14x14_ev: Enable the CCGR clocks earlier
warp7: Add a secure mode target
warp7: Use PARTUUID to specify the rootfs location
warp7: Print secure/non-secure mode info
Soeren Moch (2):
board: tbs2910: always enable usbkbd
board: tbs2910: fix HDMI pre-console buffer
Stefan Agner (1):
mtd: nand: mxs: fix cache alignment for cache lines >32
Tim Harvey (1):
imx: ventana: enable splashscreen support
Vanessa Maegima (1):
warp7: Add PMIC support
arch/arm/cpu/armv7/mx6/Kconfig | 5 +
arch/arm/cpu/armv7/mx6/ddr.c | 6 +-
arch/arm/include/asm/arch-mx6/mx6-ddr.h | 2 +
board/advantech/dms-ba16/Kconfig | 31 +++++
board/advantech/dms-ba16/MAINTAINERS | 8 ++
board/advantech/dms-ba16/Makefile | 8 ++
board/advantech/dms-ba16/clocks.cfg | 25 ++++
board/advantech/dms-ba16/ddr-setup.cfg | 39 ++++++
board/advantech/dms-ba16/dms-ba16.c | 570
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
board/advantech/dms-ba16/dms-ba16_1g.cfg | 25 ++++
board/advantech/dms-ba16/dms-ba16_2g.cfg | 25 ++++
board/advantech/dms-ba16/micron-1g.cfg | 63 ++++++++++
board/advantech/dms-ba16/samsung-2g.cfg | 63 ++++++++++
board/bachmann/ot1200/ot1200_spl.c | 2 +
board/barco/platinum/spl_picon.c | 2 +
board/barco/platinum/spl_titanium.c | 2 +
board/ccv/xpress/spl.c | 2 +
board/compulab/cm_fx6/cm_fx6.c | 6 +-
board/compulab/cm_fx6/spl.c | 4 +
board/congatec/cgtqmx6eval/cgtqmx6eval.c | 2 +
board/el/el6x/el6x.c | 2 +
board/freescale/mx6sabresd/mx6sabresd.c | 2 +
board/freescale/mx6slevk/mx6slevk.c | 2 +
board/freescale/mx6sxsabresd/mx6sxsabresd.c | 2 +
board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c | 50 ++++----
board/freescale/mx7dsabresd/mx7dsabresd.c | 13 +-
board/gateworks/gw_ventana/gw_ventana_spl.c | 2 +
board/kosagi/novena/novena_spl.c | 2 +
board/phytec/pcm058/pcm058.c | 2 +
board/solidrun/mx6cuboxi/mx6cuboxi.c | 2 +
board/technexion/pico-imx6ul/pico-imx6ul.c | 4 +-
board/udoo/udoo_spl.c | 2 +
board/wandboard/spl.c | 6 +
board/warp/imximage.cfg | 115 ++++++++++++++++++
board/warp7/warp7.c | 66 +++++++++-
configs/dms-ba16-1g_defconfig | 34 ++++++
configs/dms-ba16_defconfig | 33 +++++
configs/warp7_secure_defconfig | 36 ++++++
configs/warp_defconfig | 2 +-
drivers/mtd/nand/mxs_nand.c | 5 +
include/configs/advantech_dms-ba16.h | 315
+++++++++++++++++++++++++++++++++++++++++++++++
include/configs/gw_ventana.h | 7 +-
include/configs/tbs2910.h | 15 +--
include/configs/warp7.h | 23 +++-
tools/logos/gateworks.bmp | Bin 0 -> 56202 bytes
45 files changed, 1576 insertions(+), 56 deletions(-)
create mode 100644 board/advantech/dms-ba16/Kconfig
create mode 100644 board/advantech/dms-ba16/MAINTAINERS
create mode 100644 board/advantech/dms-ba16/Makefile
create mode 100644 board/advantech/dms-ba16/clocks.cfg
create mode 100644 board/advantech/dms-ba16/ddr-setup.cfg
create mode 100644 board/advantech/dms-ba16/dms-ba16.c
create mode 100644 board/advantech/dms-ba16/dms-ba16_1g.cfg
create mode 100644 board/advantech/dms-ba16/dms-ba16_2g.cfg
create mode 100644 board/advantech/dms-ba16/micron-1g.cfg
create mode 100644 board/advantech/dms-ba16/samsung-2g.cfg
create mode 100644 board/warp/imximage.cfg
create mode 100644 configs/dms-ba16-1g_defconfig
create mode 100644 configs/dms-ba16_defconfig
create mode 100644 configs/warp7_secure_defconfig
create mode 100644 include/configs/advantech_dms-ba16.h
create mode 100644 tools/logos/gateworks.bmp
Regards,
Stefano
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
More information about the U-Boot
mailing list