[U-Boot] [PATCH 12/82] spl: Allow PCI drivers to be used in SPL

[Simon Glass]

Add a new Kconfig option to allow PCI drivers to be used in SPL.

Signed-off-by: Simon Glass <sjg at chromium.org>
---

 common/spl/Kconfig | 9 +++++++++
 drivers/Makefile   | 1 +
 2 files changed, 10 insertions(+)

diff --git a/common/spl/Kconfig b/common/spl/Kconfig
index 3c33c9e..0c83ff1 100644
--- a/common/spl/Kconfig
+++ b/common/spl/Kconfig
@@ -378,6 +378,15 @@ config SPL_ONENAND_SUPPORT
 	  load U-Boot from supported devices. This enables the drivers in
 	  drivers/mtd/onenand as part of an SPL build.
 
+config SPL_PCI_SUPPORT
+	bool "Support PCI drivers"
+	depends on SPL
+	help
+	  Enable support for PCI in SPL. For platforms that need PCI to boot,
+	  or must perform some init using PCI in SPL, this provides the
+	  necessary driver support. This enables the drivers in drivers/pci
+	  as part of an SPL build.
+
 config SPL_POST_MEM_SUPPORT
 	bool "Support POST drivers"
 	depends on SPL
diff --git a/drivers/Makefile b/drivers/Makefile
index b4fd0c4..ae3c76a 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -33,6 +33,7 @@ obj-$(CONFIG_SPL_DMA_SUPPORT) += dma/
 obj-$(CONFIG_SPL_ETH_SUPPORT) += net/
 obj-$(CONFIG_SPL_ETH_SUPPORT) += net/phy/
 obj-$(CONFIG_SPL_USBETH_SUPPORT) += net/phy/
+obj-$(CONFIG_SPL_PCI_SUPPORT) += pci/
 obj-$(CONFIG_SPL_MUSB_NEW_SUPPORT) += usb/musb-new/
 obj-$(CONFIG_SPL_USBETH_SUPPORT) += usb/gadget/
 obj-$(CONFIG_SPL_WATCHDOG_SUPPORT) += watchdog/
-- 
2.8.0.rc3.226.g39d4020