[U-Boot] [PATCH v3 2/6] power: regulator: Add ctrl_reg and volt_reg fields for pmic

Keerthy j-keerthy at ti.com
Mon Sep 19 08:17:34 CEST 2016


The ctrl reg contains bit fields to enable and disable regulators,
and volt_reg has the bit fields to configure the voltage values.
The registers are frequently accessed hence make them part
of dm_regulator_uclass_platdata structure.

Signed-off-by: Keerthy <j-keerthy at ti.com>
---
 include/power/regulator.h | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/include/power/regulator.h b/include/power/regulator.h
index 9bcd728..2117f55 100644
--- a/include/power/regulator.h
+++ b/include/power/regulator.h
@@ -152,6 +152,8 @@ enum regulator_flag {
  * TODO(sjg at chromium.org): Consider putting the above two into @flags
  * @flags:     - flags value (see REGULATOR_FLAG_...)
  * @name**     - fdt regulator name - should be taken from the device tree
+ * ctrl_reg:   - Control register offset used to enable/disable regulator
+ * volt_reg:   - register offset for writing voltage vsel values
  *
  * Note:
  * *  - set automatically on device probe by the uclass's '.pre_probe' method.
@@ -171,6 +173,8 @@ struct dm_regulator_uclass_platdata {
 	bool boot_on;
 	const char *name;
 	int flags;
+	u8 ctrl_reg;
+	u8 volt_reg;
 };
 
 /* Regulator device operations */
-- 
1.9.1



More information about the U-Boot mailing list