[U-Boot] [PATCH v5 06/21] imx6: icorem6: Add ENET support

[Joe Hershberger]

On Wed, Sep 28, 2016 at 1:28 PM, Jagan Teki <jteki at openedev.com> wrote:
> From: Jagan Teki <jagan at amarulasolutions.com>
>
> Add enet support for engicam icorem6 qdl starter kit.
> - Add pinmux settings
> - Add board_eth_init
>
> TFTP log:
> --------
> Net:   FEC [PRIME]
> Hit any key to stop autoboot:  0
> icorem6qdl> tftpboot {fdt_addr} imx6dl-icore.dtb
> Using FEC device
> TFTP from server 192.168.2.96; our IP address is 192.168.2.75
> Filename 'imx6dl-icore.dtb'.
> Load address: 0x0
> Loading: ######
>          1.3 MiB/s
> done
> Bytes transferred = 28976 (7130 hex)
> CACHE: Misaligned operation at range [00000000, 00007130]
> icorem6qdl>
>
> Cc: Joe Hershberger <joe.hershberger at ni.com>
> Cc: Peng Fan <peng.fan at nxp.com>
> Cc: Stefano Babic <sbabic at denx.de>
> Cc: Fabio Estevam <fabio.estevam at nxp.com>
> Cc: Matteo Lisi <matteo.lisi at engicam.com>
> Cc: Michael Trimarchi <michael at amarulasolutions.com>
> Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
> ---
>  board/engicam/icorem6/icorem6.c     | 72 +++++++++++++++++++++++++++++++++++++
>  configs/imx6qdl_icore_mmc_defconfig |  4 +++
>  include/configs/imx6qdl_icore.h     | 12 +++++++
>  3 files changed, 88 insertions(+)
>

...

> diff --git a/configs/imx6qdl_icore_mmc_defconfig b/configs/imx6qdl_icore_mmc_defconfig
> index a658f4b..d304693 100644
> --- a/configs/imx6qdl_icore_mmc_defconfig
> +++ b/configs/imx6qdl_icore_mmc_defconfig
> @@ -14,6 +14,8 @@ CONFIG_SYS_MAXARGS=32
>  # CONFIG_CMD_IMLS is not set
>  CONFIG_CMD_BOOTZ=y
>  CONFIG_CMD_GPIO=y
> +CONFIG_CMD_MII=y
> +CONFIG_CMD_PING=y
>  CONFIG_CMD_MEMTEST=y
>  CONFIG_CMD_MMC=y
>  CONFIG_CMD_CACHE=y
> @@ -23,5 +25,7 @@ CONFIG_CMD_EXT4_WRITE=y
>  CONFIG_CMD_FAT=y
>  CONFIG_CMD_FS_GENERIC=y
>  CONFIG_OF_LIBFDT=y
> +CONFIG_FEC_MXC=y
>  CONFIG_MXC_UART=y
> +CONFIG_NETDEVICES=y
>  CONFIG_IMX_THERMAL=y

I guess this board can't use CONFIG_DM_ETH for some reason?