[U-Boot] [PATCH v3 1/7] rockchip: rk3399: update PPLL and pmu_pclk frequency

[Kever Yang]

Update PPLL to 676MHz and PMU_PCLK to 48MHz, because:
1. 48MHz can make sure the pwm can get exact 50% duty ratio, but 99MHz
can not,
2. We think 48MHz is fast enough for pmu pclk and it is lower power cost
than 99MHz,
3. PPLL 676 MHz and PMU_PCLK 48MHz are the clock rate we are using
internally for kernel,it suppose not to change the bus clock like pmu_pclk
in kernel, so we want to change it in uboot.

Signed-off-by: Kever Yang <kever.yang at rock-chips.com>
Acked-by: Simon Glass <sjg at chromium.org>
---

Changes in v3: None
Changes in v2: None

 arch/arm/include/asm/arch-rockchip/cru_rk3399.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/include/asm/arch-rockchip/cru_rk3399.h b/arch/arm/include/asm/arch-rockchip/cru_rk3399.h
index c919f47..6776e48 100644
--- a/arch/arm/include/asm/arch-rockchip/cru_rk3399.h
+++ b/arch/arm/include/asm/arch-rockchip/cru_rk3399.h
@@ -64,9 +64,9 @@ check_member(rk3399_cru, sdio1_con[1], 0x594);
 #define APLL_HZ		(600*MHz)
 #define GPLL_HZ		(594*MHz)
 #define CPLL_HZ		(384*MHz)
-#define PPLL_HZ		(594*MHz)
+#define PPLL_HZ		(676*MHz)
 
-#define PMU_PCLK_HZ	(99*MHz)
+#define PMU_PCLK_HZ	(48*MHz)
 
 #define ACLKM_CORE_HZ	(300*MHz)
 #define ATCLK_CORE_HZ	(300*MHz)
-- 
1.9.1