[U-Boot] [PATCH 3/3] sunxi: Enable USB gadget support for Sinlinx SinA33

[Chen-Yu Tsai]

Sinlinx SinA33 has a USB OTG port, but VBUS is controlled manually from
a jumper pad.

Enable OTG in gadget mode, as well as the download gadget and related
functions.

Signed-off-by: Chen-Yu Tsai <wens at csie.org>
---
 configs/Sinlinx_SinA33_defconfig | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/configs/Sinlinx_SinA33_defconfig b/configs/Sinlinx_SinA33_defconfig
index 673f3210a1b5..a3a234fb875a 100644
--- a/configs/Sinlinx_SinA33_defconfig
+++ b/configs/Sinlinx_SinA33_defconfig
@@ -4,11 +4,19 @@ CONFIG_MACH_SUN8I_A33=y
 CONFIG_DRAM_CLK=552
 CONFIG_DRAM_ZQ=15291
 CONFIG_MMC0_CD_PIN="PB4"
+CONFIG_USB0_ID_DET="PH8"
 CONFIG_DEFAULT_DEVICE_TREE="sun8i-a33-sinlinx-sina33"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
+CONFIG_CMD_DFU=y
 CONFIG_CMD_USB_MASS_STORAGE=y
 # CONFIG_CMD_FPGA is not set
 CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_MUSB_GADGET=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_DOWNLOAD=y
+CONFIG_G_DNL_MANUFACTURER="Allwinner Technology"
+CONFIG_G_DNL_VENDOR_NUM=0x1f3a
+CONFIG_G_DNL_PRODUCT_NUM=0x1010
-- 
2.9.3