[U-Boot] [PATCH] armv8: ls1043a: Extend the size for SPL

[Gong Qianyu]

The SPL images are growing much bigger especially when DEBUG is ON.
So need to fix the values for them.

Signed-off-by: Gong Qianyu <Qianyu.Gong at nxp.com>
---
 include/configs/ls1043a_common.h | 25 ++++++++++++++++---------
 1 file changed, 16 insertions(+), 9 deletions(-)

diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h
index e55fcb2..fa20e6d 100644
--- a/include/configs/ls1043a_common.h
+++ b/include/configs/ls1043a_common.h
@@ -69,16 +69,22 @@
 #define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_DRIVERS_MISC_SUPPORT
 #define CONFIG_SPL_MMC_SUPPORT
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR		0xf0
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR		0x110
 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS		0x500
 
 #define CONFIG_SPL_TEXT_BASE		0x10000000
-#define CONFIG_SPL_MAX_SIZE		0x1d000
-#define CONFIG_SPL_STACK		0x1001e000
-#define CONFIG_SPL_PAD_TO		0x1d000
+/*
+ * CONFIG_SPL_MAX_SIZE is limited by OCRAM memory size(128 KiB) and
+ * a reserved stack size(4 KiB).
+ * So notice that even if DEBUG is ON, the SPL image(spl/u-boot-spl.bin)
+ * should not be > 124 KiB.
+ */
+#define CONFIG_SPL_MAX_SIZE		0x1f000		/* 124 KiB */
+#define CONFIG_SPL_STACK		0x10020000
+#define CONFIG_SPL_PAD_TO		0x21000		/* 132 KiB */
 
-#define CONFIG_SYS_SPL_MALLOC_START	(CONFIG_SYS_TEXT_BASE + \
-					CONFIG_SYS_MONITOR_LEN)
+#define CONFIG_SYS_SPL_MALLOC_START	(CONFIG_SPL_BSS_START_ADDR + \
+					CONFIG_SPL_BSS_MAX_SIZE)
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000
 #define CONFIG_SPL_BSS_START_ADDR	0x80100000
 #define CONFIG_SPL_BSS_MAX_SIZE		0x80000
@@ -101,11 +107,12 @@
 #define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SPL_DRIVERS_MISC_SUPPORT
 #define CONFIG_SPL_TEXT_BASE		0x10000000
-#define CONFIG_SPL_MAX_SIZE		0x1a000
-#define CONFIG_SPL_STACK		0x1001d000
+#define CONFIG_SPL_MAX_SIZE		0x1d000		/* 116 KiB */
+#define CONFIG_SPL_STACK		0x1001f000
 #define CONFIG_SYS_NAND_U_BOOT_DST	CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_SPL_MALLOC_START	0x80200000
+#define CONFIG_SYS_SPL_MALLOC_START	(CONFIG_SPL_BSS_START_ADDR + \
+					CONFIG_SPL_BSS_MAX_SIZE)
 #define CONFIG_SPL_BSS_START_ADDR	0x80100000
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000
 #define CONFIG_SPL_BSS_MAX_SIZE		0x80000
-- 
2.1.0.27.g96db324