[U-Boot] ?==?utf-8?q? ?==?utf-8?q? [PATCH v6]?==?utf-8?q? spi:?==?utf-8?q? pl022_spi: Add support for ARM PL022 spi controller
Michael Brandl
Michael.Brandl at HS-Augsburg.DE
Mon Sep 19 13:59:25 CEST 2016
Ciao Armando,
Hi Jagan,
On Friday I found another driver implementation already on my desktop, by grepping for pl022 in the upper level ../, but it is more general and not easy to understand. But maybe it helps us to find the information we need.
This is how I started! Now as patchset based on u-boot-spi.git:
diff --git a/arch/arm/cpu/armv8/hisilicon/pinmux.c b/arch/arm/cpu/armv8/hisilicon/pinmux.c
index 3e4c9ce..83f02db 100644
--- a/arch/arm/cpu/armv8/hisilicon/pinmux.c
+++ b/arch/arm/cpu/armv8/hisilicon/pinmux.c
@@ -17,6 +17,24 @@ struct hi6220_pinmux0_regs *pmx0 =
struct hi6220_pinmux1_regs *pmx1 =
(struct hi6220_pinmux1_regs *)HI6220_PINMUX1_BASE;
+static void hi6220_spi_config(int peripheral)
+{
+ switch (peripheral) {
+ case PERIPH_ID_SPI0:
+// at91_set_a_periph(AT91_PIO_PORTC, 0, 0); /* SPI0_MISO */
+// at91_set_a_periph(AT91_PIO_PORTC, 1, 0); /* SPI0_MOSI */
+// at91_set_a_periph(AT91_PIO_PORTC, 2, 0); /* SPI0_SPCK */
+ break;
+
+ case PERIPH_ID_SPI1:
+ break;
+
+ default:
+ debug("%s: invalid peripheral %d", __func__, peripheral);
+ return;
+ }
+}
+
static void hi6220_uart_config(int peripheral)
{
switch (peripheral) {
@@ -164,6 +182,9 @@ static int hi6220_mmc_config(int peripheral)
int hi6220_pinmux_config(int peripheral)
{
switch (peripheral) {
+ case PERIPH_ID_SPI0:
+ hi6220_spi_config(peripheral);
+ break;
case PERIPH_ID_UART0:
case PERIPH_ID_UART1:
case PERIPH_ID_UART2:
diff --git a/arch/arm/include/asm/arch-hi6220/hi6220.h b/arch/arm/include/asm/arch-hi6220/hi6220.h
index 3a12c75..1b73f42 100644
--- a/arch/arm/include/asm/arch-hi6220/hi6220.h
+++ b/arch/arm/include/asm/arch-hi6220/hi6220.h
@@ -19,6 +19,8 @@
#define HI6220_PMUSSI_BASE 0xF8000000
#define HI6220_PERI_BASE 0xF7030000
+/*Hi6220V100_Multi-Mode_Application_Processor_Function_Description on p.5-45*/
+#define HI6220_SPI_BASE 0xF7106000
struct peri_sc_periph_regs {
u32 ctrl1; /*0x0*/
diff --git a/arch/arm/include/asm/arch-hi6220/periph.h b/arch/arm/include/asm/arch-hi6220/periph.h
index 7155f60..b58a0f7 100644
--- a/arch/arm/include/asm/arch-hi6220/periph.h
+++ b/arch/arm/include/asm/arch-hi6220/periph.h
@@ -25,6 +25,8 @@ enum periph_id {
PERIPH_ID_SDMMC1,
PERIPH_ID_NONE = -1,
+ PERIPH_ID_SPI0,
+ PERIPH_ID_SPI1,
};
#endif /* __ASM_ARM_ARCH_PERIPH_H */
diff --git a/board/hisilicon/hikey/hikey.c b/board/hisilicon/hikey/hikey.c
index 72d6334..e90ea74 100644
--- a/board/hisilicon/hikey/hikey.c
+++ b/board/hisilicon/hikey/hikey.c
@@ -21,6 +21,10 @@
#include <asm/arch/hi6220.h>
#include <asm/armv8/mmu.h>
+#ifdef CONFIG_PL022_SPI
+#include <spi.h>
+#endif
+
/*TODO drop this table in favour of device tree */
static const struct hikey_gpio_platdata hi6220_gpio[] = {
{ 0, HI6220_GPIO_BASE(0)},
@@ -335,9 +339,46 @@ int misc_init_r(void)
{
return 0;
}
+#ifdef CONFIG_PL022_SPI
+int spi_cs_is_valid(unsigned int bus, unsigned int cs)
+{
+ return bus == 0 && cs == 0;
+}
+
+void spi_cs_activate(struct spi_slave *slave)
+{
+// at91_set_pio_output(AT91_PIO_PORTC, 3, 0);
+ gpio_request(0, "PWR_HOLD_GPIO0_0");
+ gpio_direction_output(0, 1);
+}
+
+void spi_cs_deactivate(struct spi_slave *slave)
+{
+// at91_set_pio_output(AT91_PIO_PORTC, 3, 1);
+ gpio_request(0, "PWR_HOLD_GPIO0_0");
+ gpio_direction_output(0, 1);
+}
+
+static void hikey_spi0_hw_init(void)
+{
+ hi6220_pinmux_config(PERIPH_ID_SPI0);
+// at91_set_pio_output(AT91_PIO_PORTC, 3, 1); /* SPI0_CS0 */
+ gpio_request(0, "PWR_HOLD_GPIO0_0");
+ gpio_direction_output(0, 1);
+
+ /* Enable clock */
+// at91_periph_clk_enable(ATMEL_ID_SPI0);
+/* from Kernel { HI6220_SPI_CLK, "spi_clk", "clk_150m", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x230, 9, 0, }, */
+// hi6220_clk_enable(PERI_CLK0_SPI0, &peri_sc->clk3_en);
+
+}
+#endif /* CONFIG_PL022_SPI */
int board_init(void)
{
+#ifdef CONFIG_PL022_SPI
+ hikey_spi0_hw_init();
+#endif
return 0;
}
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index b1d9e20..a509d93 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -6,6 +6,8 @@
#
# There are many options which enable SPI, so make this library available
+obj-$(CONFIG_PL022_SPI) += pl022_spi.o
+
ifdef CONFIG_DM_SPI
obj-y += spi-uclass.o
obj-$(CONFIG_SANDBOX) += spi-emul-uclass.o
diff --git a/drivers/spi/pl022_spi.c b/drivers/spi/pl022_spi.c
index e69de29..e80fed3 100644
--- a/drivers/spi/pl022_spi.c
+++ b/drivers/spi/pl022_spi.c
@@ -0,0 +1,321 @@
+/*
+ * (C) Copyright 2012
+ * Armando Visconti, ST Microelectronics, armando.visconti at st.com.
+ *
+ * Driver for ARM PL022 SPI Controller. Based on atmel_spi.c
+ * by Atmel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+/* Comment by Jagan: Use latest SPDX-License-Identifier: >> check for any existing one. */
+
+#include <common.h>
+#include <malloc.h>
+#include <spi.h>
+#include <asm/io.h>
+//#include <asm/arch/hardware.h>
+
+/* SSP registers mapping */
+/* Comment by Jagan: Something like pl022_spi_regs*/
+struct pl022 {
+ u32 ssp_cr0; /* 0x000 */
+ u32 ssp_cr1; /* 0x004 */
+ u32 ssp_dr; /* 0x008 */
+ u32 ssp_sr; /* 0x00c */
+ u32 ssp_cpsr; /* 0x010 */
+ u32 ssp_imsc; /* 0x014 */
+ u32 ssp_ris; /* 0x018 */
+ u32 ssp_mis; /* 0x01c */
+ u32 ssp_icr; /* 0x020 */
+ u32 ssp_dmacr; /* 0x024 */
+ u8 reserved_1[0x080 - 0x028];
+ u32 ssp_itcr; /* 0x080 */
+ u32 ssp_itip; /* 0x084 */
+ u32 ssp_itop; /* 0x088 */
+ u32 ssp_tdr; /* 0x08c */
+ u8 reserved_2[0xFE0 - 0x090];
+ u32 ssp_pid0; /* 0xfe0 */
+ u32 ssp_pid1; /* 0xfe4 */
+ u32 ssp_pid2; /* 0xfe8 */
+ u32 ssp_pid3; /* 0xfec */
+ u32 ssp_cid0; /* 0xff0 */
+ u32 ssp_cid1; /* 0xff4 */
+ u32 ssp_cid2; /* 0xff8 */
+ u32 ssp_cid3; /* 0xffc */
+};
+
+/* Comment by Jagan: -- TAG+*/
+/* SSP Control Register 0 - SSP_CR0 */
+#define SSP_CR0_SPO (0x1 << 6)
+#define SSP_CR0_SPH (0x1 << 7)
+#define SSP_CR0_8BIT_MODE (0x07)
+#define SSP_SCR_MAX (0xFF)
+#define SSP_SCR_SHFT 8
+
+/* SSP Control Register 0 - SSP_CR1 */
+#define SSP_CR1_MASK_SSE (0x1 << 1)
+
+#define SSP_CPSR_MAX (0xFE)
+
+/* SSP Status Register - SSP_SR */
+#define SSP_SR_MASK_TFE (0x1 << 0) /* Transmit FIFO empty */
+#define SSP_SR_MASK_TNF (0x1 << 1) /* Transmit FIFO not full */
+#define SSP_SR_MASK_RNE (0x1 << 2) /* Receive FIFO not empty */
+#define SSP_SR_MASK_RFF (0x1 << 3) /* Receive FIFO full */
+#define SSP_SR_MASK_BSY (0x1 << 4) /* Busy Flag */
+
+/* Comment by Jagan: --- TAG -*/
+/* Comment by Jagan:
+ * Bit mask macros - please place after headers.
+ * We follow a simple format to write spi driver - please check
+ * http://patchwork.ozlabs.org/patch/265683/
+ *
+ * And try to verify your code w.r.t above format - let me know any comments.
+ */
+struct pl022_spi_slave {
+ struct spi_slave slave;
+ void *regs;
+/* Comment by Jagan: Please use the structure pointer instead of void. */
+
+ unsigned int freq;
+};
+
+static inline struct pl022_spi_slave *to_pl022_spi(struct spi_slave *slave)
+{
+ return container_of(slave, struct pl022_spi_slave, slave);
+}
+
+/*
+ * Following three functions should be provided by the
+ * board support package.
+ */
+int __weak spi_cs_is_valid(unsigned int bus, unsigned int cs)
+{
+ return 1;
+}
+
+void __weak spi_cs_activate(struct spi_slave *slave)
+{
+ /* do nothing */
+}
+
+void __weak spi_cs_deactivate(struct spi_slave *slave)
+{
+ /* do nothing */
+}
+
+void spi_init(void)
+{
+ /* do nothing */
+}
+
+/*
+ * ARM PL022 exists in different 'flavors'.
+ * This drivers currently support the standard variant (0x00041022), that has a
+ * 16bit wide and 8 locations deep TX/RX FIFO.
+ */
+static int pl022_is_supported(struct pl022_spi_slave *ps)
+{
+ struct pl022 *pl022 = (struct pl022 *)ps->regs;
+
+ /* PL022 version is 0x00041022 */
+ if ((readl(&pl022->ssp_pid0) == 0x22) &&
+ (readl(&pl022->ssp_pid1) == 0x10) &&
+ ((readl(&pl022->ssp_pid2) & 0xf) == 0x04) &&
+ (readl(&pl022->ssp_pid3) == 0x00))
+ return 1;
+
+ return 0;
+}
+
+struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
+ unsigned int max_hz, unsigned int mode)
+{
+ struct pl022_spi_slave *ps;
+ struct pl022 *pl022;
+ u16 scr = 1, prescaler, cr0 = 0, cpsr = 0;
+
+ if (!spi_cs_is_valid(bus, cs))
+ return NULL;
+
+ ps = spi_alloc_slave(struct pl022_spi_slave, bus, cs);
+ if (!ps)
+ return NULL;
+
+ ps->freq = max_hz;
+
+ switch (bus) {
+ case 0:
+ ps->regs = (void *)CONFIG_SYS_SPI_BASE;
+ break;
+#ifdef CONFIG_SYS_SPI_BASE1
+ case 1:
+ ps->regs = (void *)CONFIG_SYS_SPI_BASE1;
+ break;
+#endif
+#ifdef CONFIG_SYS_SPI_BASE2
+ case 2:
+ ps->regs = (void *)CONFIG_SYS_SPI_BASE2;
+ break;
+#endif
+#ifdef CONFIG_SYS_SPI_BASE3
+ case 3:
+ ps->regs = (void *)CONFIG_SYS_SPI_BASE3;
+ break;
+#endif
+ default:
+ free(ps);
+ return NULL;
+ }
+
+ pl022 = (struct pl022 *)ps->regs;
+
+ /* Check the PL022 version */
+ if (!pl022_is_supported(ps)) {
+ free(ps);
+ return NULL;
+ }
+
+ /* Set requested polarity and 8bit mode */
+ cr0 = SSP_CR0_8BIT_MODE;
+ cr0 |= (mode & SPI_CPHA) ? SSP_CR0_SPH : 0;
+ cr0 |= (mode & SPI_CPOL) ? SSP_CR0_SPO : 0;
+
+ writel(cr0, &pl022->ssp_cr0);
+
+ /* Program the SSPClk frequency */
+ prescaler = CONFIG_SYS_SPI_CLK / ps->freq;
+
+ if (prescaler <= 0xFF) {
+ cpsr = prescaler;
+ } else {
+ for (scr = 1; scr <= SSP_SCR_MAX; scr++) {
+ if (!(prescaler % scr)) {
+ cpsr = prescaler / scr;
+ if (cpsr <= SSP_CPSR_MAX)
+ break;
+ }
+ }
+
+ if (scr > SSP_SCR_MAX) {
+ scr = SSP_SCR_MAX;
+ cpsr = prescaler / scr;
+ cpsr &= SSP_CPSR_MAX;
+ }
+ }
+
+ if (cpsr & 0x1)
+ cpsr++;
+
+ writel(cpsr, &pl022->ssp_cpsr);
+ cr0 = readl(&pl022->ssp_cr0);
+ writel(cr0 | (scr - 1) << SSP_SCR_SHFT, &pl022->ssp_cr0);
+
+ return &ps->slave;
+}
+
+void spi_free_slave(struct spi_slave *slave)
+{
+ struct pl022_spi_slave *ps = to_pl022_spi(slave);
+
+ free(ps);
+}
+
+int spi_claim_bus(struct spi_slave *slave)
+{
+ struct pl022_spi_slave *ps = to_pl022_spi(slave);
+ struct pl022 *pl022 = (struct pl022 *)ps->regs;
+
+ /* Enable the SPI hardware */
+ setbits_le32(&pl022->ssp_cr1, SSP_CR1_MASK_SSE);
+
+ return 0;
+}
+
+void spi_release_bus(struct spi_slave *slave)
+{
+ struct pl022_spi_slave *ps = to_pl022_spi(slave);
+ struct pl022 *pl022 = (struct pl022 *)ps->regs;
+
+ /* Disable the SPI hardware */
+ writel(0x0, &pl022->ssp_cr1);
+}
+
+int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
+ const void *dout, void *din, unsigned long flags)
+{
+ struct pl022_spi_slave *ps = to_pl022_spi(slave);
+ struct pl022 *pl022 = (struct pl022 *)ps->regs;
+ u32 len_tx = 0, len_rx = 0, len;
+ u32 ret = 0;
+ const u8 *txp = dout;
+ u8 *rxp = din, value;
+
+ if (bitlen == 0)
+ /* Finish any previously submitted transfers */
+ goto out;
+
+ /*
+ * TODO: The controller can do non-multiple-of-8 bit
+ * transfers, but this driver currently doesn't support it.
+ *
+ * It's also not clear how such transfers are supposed to be
+ * represented as a stream of bytes...this is a limitation of
+ * the current SPI interface.
+ */
+ if (bitlen % 8) {
+ ret = -1;
+
+ /* Errors always terminate an ongoing transfer */
+ flags |= SPI_XFER_END;
+ goto out;
+ }
+
+ len = bitlen / 8;
+
+ if (flags & SPI_XFER_BEGIN)
+ spi_cs_activate(slave);
+
+ while (len_tx < len) {
+ if (readl(&pl022->ssp_sr) & SSP_SR_MASK_TNF) {
+ value = (txp != NULL) ? *txp++ : 0;
+ writel(value, &pl022->ssp_dr);
+ len_tx++;
+ }
+
+ if (readl(&pl022->ssp_sr) & SSP_SR_MASK_RNE) {
+ value = readl(&pl022->ssp_dr);
+ if (rxp)
+ *rxp++ = value;
+ len_rx++;
+ }
+ }
+
+ while (len_rx < len_tx) {
+ if (readl(&pl022->ssp_sr) & SSP_SR_MASK_RNE) {
+ value = readl(&pl022->ssp_dr);
+ if (rxp)
+ *rxp++ = value;
+ len_rx++;
+ }
+ }
+
+out:
+ if (flags & SPI_XFER_END)
+ spi_cs_deactivate(slave);
+
+ return ret;
+}
diff --git a/include/configs/hikey.h b/include/configs/hikey.h
index ffcc4d2..5ac8997 100644
--- a/include/configs/hikey.h
+++ b/include/configs/hikey.h
@@ -76,6 +76,24 @@
#define CONFIG_HIKEY_GPIO
+/* Synchronous Serial Port PL022 for SPI */
+#define CONFIG_PL022_SPI
+
+/* SPI Configuration */
+#define CONFIG_SYS_SPI_BASE 0xF7106000
+//#define CONFIG_DAVINCI_SPI
+//#define CONFIG_SYS_SPI_CLK clk_get_rate(KS2_CLK1_6)
+//#define CONFIG_SYS_SPI_CLK 24000000
+//#define CONFIG_SYS_SPI_CLK 83000000
+#define CONFIG_SYS_SPI_CLK 121000000
+//#define CONFIG_SF_DEFAULT_SPEED 30000000
+//#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
+#ifdef CONFIG_SPL_BUILD
+#undef CONFIG_DM_SPI
+#undef CONFIG_DM_SPI_FLASH
+#endif
+
+
Am Mittwoch, September 14, 2016 16:39 CEST, Armando Visconti <armando.visconti at st.com> schrieb:
> Ciao Michael,
>
> On 09/08/2016 04:21 PM, Michael Brandl wrote:
> > Dear U-Boot (SPI) Developers,
> >
> > this patch seems to be my only chance to get spi working without/before Linux.
>
> I wrote and used this code for u-boot for a asic
> specified by one of our customers. The patch was generic
> enough to be pushed in u-boot, but I didn't have
> much time to test it on a different, more generic
> platform. So the maintainer decided to drop it...
>
> Would be nice if you could work on it and resurrect it...
> :)
>
> Let me know if you have progressed on this or abandoned it.
>
> >
> > I'm a student from Augsburg (Germany) experimenting with the Hikey Board from 96boards.
> > The hi6220 processor from HiSilicon isn't fully documented, there is just one document called Function Description:
> > http://mirror.lemaker.org/Hi6220V100_Multi-Mode_Application_Processor_Function_Description.pdf
> >
>
> Yes, I'm currently using HiKey platform for doing my day by day
> job here in office. Nevertheless, I don't think I have enough
> time to take a look into testing this commit.
>
> > U-Boot already supports the Hikey Board to be loaded from ARM Trusted Firmware (ATF) but only UART and SDMMC is supported by now.
> > I cloned the u-boot-spi.git and tried to integrate this patch but I'm not experienced enough to adjust the specific config for the Hikey Board.
> >
>
> Maybe I can try to recover the work that was done to integrate
> this commit into the customer platform I was talking about.
> I'll take a look into it right now...
>
> > Taking a look at armv7 devices with spi support I started like this:
> >
> > +++ b/arch/arm/include/asm/arch-hi6220/hi6220.h
> >
> > +/*Hi6220V100_Multi-Mode_Application_Processor_Function_Description on p.5-45*/
> > +#define HI6220_SPI_BASE 0xF7106000
> >
> >
> > +++ b/include/configs/hikey.h
> >
> > +/* Synchronous Serial Port PL022 for SPI */
> > +#define CONFIG_PL022_SPI
> >
> >
> > +++ b/board/hisilicon/hikey/hikey.c
> >
> > int board_init(void)
> > {
> > +#ifdef CONFIG_PL022_SPI
> > + hikey_spi0_hw_init();
> > +#endif
> > return 0;
> > }
> >
> >
> > +static void hikey_spi0_hw_init(void)
> > +{
> > + hi6220_pinmux_config(PERIPH_ID_SPI0)
> > +// at91_set_pio_output(AT91_PIO_PORTC, 3, 1); /* SPI0_CS0 */
> > + gpio_request(0, "PWR_HOLD_GPIO0_0");
> > + gpio_direction_output(0, 1);
> > +
> > + /* Enable clock */
> > +// at91_periph_clk_enable(ATMEL_ID_SPI0);
> > +/* from Kernel { HI6220_SPI_CLK, "spi_clk", "clk_150m", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x230, 9, 0, }, */
> > + hi6220_clk_enable(PERI_CLK0_SPI0, &peri_sc->clk3_en);
> > +
> > +}
> > +#endif /* CONFIG_PL022_SPI */
> > +
> >
> >
> > +++ b/arch/arm/cpu/armv8/hisilicon/pinmux.c
> >
> > +static void hi6220_spi_config(int peripheral)
> > +{
> > + switch (peripheral) {
> > + case PERIPH_ID_SPI0:
> > +// at91_set_a_periph(AT91_PIO_PORTC, 0, 0); /* SPI0_MISO */
> > +// at91_set_a_periph(AT91_PIO_PORTC, 1, 0); /* SPI0_MOSI */
> > +// at91_set_a_periph(AT91_PIO_PORTC, 2, 0); /* SPI0_SPCK */
> > + break;
> > +
> > + case PERIPH_ID_SPI1:
> > + break;
> > +
> > + default:
> > + debug("%s: invalid peripheral %d", __func__, peripheral);
> > + return;
> > + }
> > +}
> >
> > Maybe you can help me to get spi working on Hikey. My overall aim is to port the pl022 driver then to ARM TF ... maybe also that could be interessing for you.
> >
> > With kind Regards,
> > Michael Brandl
> >
> >
> >
> >
>
> Rgds,
> Armando
>
More information about the U-Boot
mailing list