[U-Boot] [PATCH 2/4] ARM: tegra: configure Ethernet address on Tegra186
Stephen Warren
swarren at wwwdotorg.org
Mon Sep 12 19:51:13 CEST 2016
From: Stephen Warren <swarren at nvidia.com>
On Tegra186, the bootloader which runs before U-Boot passes the Ethernet
MAC address to U-Boot using device tree. Extract this value and write it
to the environment, so that the Ethernet uclass picks it up and uses it
for the built-in Ethernet device.
Signed-off-by: Stephen Warren <swarren at nvidia.com>
---
arch/arm/mach-tegra/tegra186/Makefile | 1 +
arch/arm/mach-tegra/tegra186/nvtboot_board.c | 54 ++++++++++++++++++++++++++++
2 files changed, 55 insertions(+)
create mode 100644 arch/arm/mach-tegra/tegra186/nvtboot_board.c
diff --git a/arch/arm/mach-tegra/tegra186/Makefile b/arch/arm/mach-tegra/tegra186/Makefile
index 033d6005fb44..26bc462930c1 100644
--- a/arch/arm/mach-tegra/tegra186/Makefile
+++ b/arch/arm/mach-tegra/tegra186/Makefile
@@ -3,5 +3,6 @@
# SPDX-License-Identifier: GPL-2.0
obj-y += ../board186.o
+obj-y += nvtboot_board.o
obj-y += nvtboot_ll.o
obj-y += nvtboot_mem.o
diff --git a/arch/arm/mach-tegra/tegra186/nvtboot_board.c b/arch/arm/mach-tegra/tegra186/nvtboot_board.c
new file mode 100644
index 000000000000..1d78346f9843
--- /dev/null
+++ b/arch/arm/mach-tegra/tegra186/nvtboot_board.c
@@ -0,0 +1,54 @@
+/*
+ * Copyright (c) 2016, NVIDIA CORPORATION.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <fdt_support.h>
+#include <fdtdec.h>
+#include <asm/arch/tegra.h>
+
+extern unsigned long nvtboot_boot_x0;
+
+/*
+ * Attempt to use /chosen/nvidia,ether-mac in the nvtboot DTB to U-Boot's
+ * ethaddr environment variable if possible.
+ */
+static int set_ethaddr_from_nvtboot(void)
+{
+ const void *nvtboot_blob = (void *)nvtboot_boot_x0;
+ int ret, node, len;
+ const u32 *prop;
+
+ /* Already a valid address in the environment? If so, keep it */
+ if (getenv("ethaddr"))
+ return 0;
+
+ node = fdt_path_offset(nvtboot_blob, "/chosen");
+ if (node < 0) {
+ printf("Can't find /chosen node in nvtboot DTB\n");
+ return node;
+ }
+ prop = fdt_getprop(nvtboot_blob, node, "nvidia,ether-mac", &len);
+ if (!prop) {
+ printf("Can't find nvidia,ether-mac property in nvtboot DTB\n");
+ return -ENOENT;
+ }
+
+ ret = setenv("ethaddr", (void *)prop);
+ if (ret) {
+ printf("Failed to set ethaddr from nvtboot DTB: %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+int tegra_soc_board_init_late(void)
+{
+ /* Ignore errors here; not all cases care about Ethernet addresses */
+ set_ethaddr_from_nvtboot();
+
+ return 0;
+}
--
2.9.3
More information about the U-Boot
mailing list