[U-Boot] [PATCH 0/6] at91: at91sam9g15 improvements
Heiko Schocher
hs at denx.de
Fri Sep 30 07:14:45 CEST 2016
Hello Andreas,
Am 17.08.2016 um 09:13 schrieb Heiko Schocher:
> This series add some missing things for an at91sam9g15
> board, which gets not mainlined, but there are common
> fixes, which are posted with this patchserie.
>
> 2 important things:
> - enable icache for AT91 based boards
> speeds up them a lot, for example reading 8MiB from
> an SPI NOR flash into RAM takes with icache off ~15 seconds
> with icache enabled only ~5 seconds.
>
> gurnard board defines a board specific enable_caches()
> function which enables dcache .. with acomment that this
> breaks Ethernet MAC ... I removed this board specific
> function, and dcache enable functions should be
> added in arch/arm/mach-at91/arm926ejs/cache.c
>
> - SPL clock fix, posted as RFC, as it may breaks other boards.
> If so, we may make clock settings in SPL board configurable
> through a weak function?
>
> buildman finds no new errors/warnings with the patches
> from this patchseries applied.
>
>
> Heiko Schocher (6):
> arm: at91: mpddrc: add missing MPDDRC_MD defines
> ARM: at91: clock: correct PRES offset for at91sam9x5
> arm, at91: add icache support
> arm, at91: add some missing fields in PIO struct
> at91: add function to set IO drive
> [RFC] at91: SPL clock fix for AT91SAM9G15 based boards.
>
> arch/arm/mach-at91/arm926ejs/Makefile | 1 +
> arch/arm/mach-at91/arm926ejs/cache.c | 29 ++++++++++++++++++++++++++
> arch/arm/mach-at91/arm926ejs/clock.c | 6 ++++++
> arch/arm/mach-at91/include/mach/at91_pio.h | 11 +++++++++-
> arch/arm/mach-at91/include/mach/atmel_mpddrc.h | 3 +++
> arch/arm/mach-at91/include/mach/gpio.h | 2 ++
> arch/arm/mach-at91/spl_at91.c | 13 +++++++++---
> board/bluewater/gurnard/gurnard.c | 6 ------
> drivers/gpio/at91_gpio.c | 29 ++++++++++++++++++++++++++
> 9 files changed, 90 insertions(+), 10 deletions(-)
> create mode 100644 arch/arm/mach-at91/arm926ejs/cache.c
>
This patchset is now pending for more than 1 month ... are there
any issues, or do you plan to apply it?
Thanks!
bye,
Heiko
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
More information about the U-Boot
mailing list