[U-Boot] [Patch v6 0/9] Add LS1046ARDB&QDS board support

york sun york.sun at nxp.com
Tue Sep 20 20:06:44 CEST 2016


On 09/07/2016 03:08 AM, Gong Qianyu wrote:
> Hi all,
>
> This is version 6 patchset mainly to add support for both LS1046ARDB&QDS board.
> It should be based on two DDR patches to work well on LS1046ARDB or LS1046AQDS.
> The two patches are:
> http://patchwork.ozlabs.org/patch/663534/
> http://patchwork.ozlabs.org/patch/663535/
>
> PCIe, USB and lpuart are not supported yet due to lack of some driver patches
> and I'll send them to upstream once they're ready.
> Please help to review. Thanks very much!
>
> Changes in v6:
>  - Remove lpuart support for QDS board.
>  - Move CONFIG_FSL_QSPI to defconfig and select DM_SPI_FLASH in Kconfig.
> Changes in v5:
>  - Add a new patch to remove BSS clearing and board_init_r in spl.c.
>  - Fix SPL_PAD_TO size to block aligned value for NAND boot.
>  - Adjust the SPL BSS and MALLOC address for future use.
> Changes in v4:
>  - Extend SPL max size and pad_to size for SD boot.
>  - Add LS1046AQDS board support patch.
> Changes in v3:
>  - Remove redundant sd rcw .cfg files.
>  - Adjust the format of memory map in readme.
>  - Add emmc boot support.
> Changes in v2:
>  - Add ERRATUM_A008511.
>  - Use values directly instead of macros for SATA ECC.
>  - Add >60 characters' paragraph for the board help.
>  - Fix the memory map in readme.
>  - Remove unused flash r/w functions.
>  - Remove DDR3 defines.
>  - Revise some commit messages.
>
> Gong Qianyu (1):
>   armv8: fsl-layerscape: spl: remove BSS clearing and board_init_r
>
> Mingkai Hu (2):
>   armv8: fsl-layerscape: Increase L2 Data RAM latency and L2 Tag RAM
>     latency
>   armv8: ls1046ardb: Add LS1046ARDB board support
>
> Shaohui Xie (5):
>   ddr: fsl: fix a compile issue
>   Export memset for standalone AQ FW load apps
>   armv8: fsl-layerscape: add define CONFIG_STANDALONE_LOAD_ADDR for
>     standalone app
>   armv8: ls1046a: disable SATA ECC in DCSR
>   armv8: ls1046aqds: Add LS1046AQDS board support
>
> Shengzhou Liu (1):
>   armv8: ls1046a: Enable DDR erratum for ls1046a
>

This set has been applied to fsl-qoriq master. Awaiting upstream. Thanks.

York



More information about the U-Boot mailing list