[U-Boot] [PATCH] A20-OLinuXino-Lime2: Enable USB gadget support

[Tom Rini]

Based on A13-OLinuXino, enable DFU and UMS support.

Signed-off-by: Tom Rini <trini at konsulko.com>
---
With this change I've added DFU to my tests on this board, and assuming a
follow up test with the SD image that kicks the board into FEL works, I'll
then enable the UMS tests on this board (and add DFU to SD, not just DFU to
RAM).

 configs/A20-OLinuXino-Lime2_defconfig | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/configs/A20-OLinuXino-Lime2_defconfig b/configs/A20-OLinuXino-Lime2_defconfig
index 23db07380624..54343de7f351 100644
--- a/configs/A20-OLinuXino-Lime2_defconfig
+++ b/configs/A20-OLinuXino-Lime2_defconfig
@@ -12,9 +12,17 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPC(3)"
 CONFIG_SPL=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
+CONFIG_CMD_DFU=y
+CONFIG_CMD_USB_MASS_STORAGE=y
 # CONFIG_CMD_FPGA is not set
 CONFIG_RTL8211X_PHY_FORCE_MASTER=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_AXP_ALDO3_VOLT=2800
 CONFIG_AXP_ALDO4_VOLT=2800
 CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_MUSB_GADGET=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_DOWNLOAD=y
+CONFIG_G_DNL_MANUFACTURER="Allwinner Technology"
+CONFIG_G_DNL_VENDOR_NUM=0x1f3a
+CONFIG_G_DNL_PRODUCT_NUM=0x1010
-- 
1.9.1