[U-Boot] [PATCH v3 00/16] imx6: Add Engicam i.CoreM6 QDL support
Jagan Teki
jagannadh.teki at gmail.com
Thu Sep 22 17:22:49 CEST 2016
This series supports Engicam i.CoreM6 QDL modules on top of u-boot-imx.git/next
and test on the respective starter kits as well.
Changes for v3:
- Remove "v2 01/17 imx: iomux-v3: Fix build error with snvs base" patch
- Remove 'default n' on Kconfig DEFAULT_FDT_FILE patch
- Add minimal devicetree support for Engicam i.CoreM6 QDL
- Add is_mx6dl()
- Add is_mx6solo()
- Use is_mx6dq()
- Add last commit sha1 and header in pull devicetree files from Linux
Changes for v2:
- Make static to local iomux structure in board file
- Corrected rowaddr in mx6_ddr3_cfg
- Used imx_ddr_size
- Add FEC support and tested the same
- Add DM_GPIO, DM_MMC support
- Add pinctrl support
- Add devicetree support
Jagan Teki (16):
serial: Kconfig: Add MXC_UART entry
thermal: Kconfig: Add IMX_THERMAL entry
Kconfig: Add DEFAULT_FDT_FILE entry
arm: imx: Add Engicam i.CoreM6 QDL Starter Kit initial support
imx6: icorem6: Add ENET support
imx: s/docs\/README.imximage/doc\/README.imximage/g
arm: dts: Add devicetree for i.MX6DL
arm: dts: Add devicetree for i.MX6DQL
arm: dts: imx6dl: Add pinctrl defines
dt-bindings: clock: imx6qdl: Add clock defines
arm: imx6q: Add devicetree support for Engicam i.CoreM6 DualLite/Solo
imx6q: icorem6: Enable pinctrl driver
engicam: icorem6: Add DM_GPIO, DM_MMC support
arm: dts: Add devicetree for i.MX6Q
arm: dts: imx6q: Add pinctrl defines
arm: imx6q: Add devicetree support for Engicam i.CoreM6 Quad/Dual
arch/arm/cpu/armv7/mx6/Kconfig | 11 +
arch/arm/dts/Makefile | 4 +-
arch/arm/dts/imx6dl-icore.dts | 59 ++
arch/arm/dts/imx6dl-pinfunc.h | 1091 +++++++++++++++++++++++
arch/arm/dts/imx6dl.dtsi | 133 +++
arch/arm/dts/imx6q-icore.dts | 59 ++
arch/arm/dts/imx6q-pinfunc.h | 1047 ++++++++++++++++++++++
arch/arm/dts/imx6q.dtsi | 300 +++++++
arch/arm/dts/imx6qdl-icore.dtsi | 196 ++++
arch/arm/dts/imx6qdl.dtsi | 1281 +++++++++++++++++++++++++++
arch/arm/include/asm/imx-common/sys_proto.h | 2 +
board/barco/titanium/imximage.cfg | 2 +-
board/ccv/xpress/imximage.cfg | 2 +-
board/denx/m53evk/imximage.cfg | 2 +-
board/engicam/icorem6/Kconfig | 12 +
board/engicam/icorem6/MAINTAINERS | 6 +
board/engicam/icorem6/Makefile | 6 +
board/engicam/icorem6/README | 38 +
board/engicam/icorem6/icorem6.c | 474 ++++++++++
board/freescale/mx6sabresd/mx6dlsabresd.cfg | 2 +-
board/freescale/mx6slevk/imximage.cfg | 2 +-
board/freescale/mx6ullevk/imximage.cfg | 2 +-
board/freescale/mx7dsabresd/imximage.cfg | 2 +-
board/freescale/s32v234evb/s32v234evb.cfg | 2 +-
board/freescale/vf610twr/imximage.cfg | 2 +-
board/phytec/pcm052/imximage.cfg | 2 +-
board/technexion/pico-imx6ul/imximage.cfg | 2 +-
board/toradex/colibri_imx7/imximage.cfg | 2 +-
board/toradex/colibri_vf/imximage.cfg | 2 +-
board/warp/imximage.cfg | 2 +-
board/warp7/imximage.cfg | 2 +-
common/Kconfig | 5 +
configs/imx6qdl_icore_defconfig | 32 +
drivers/serial/Kconfig | 7 +
drivers/thermal/Kconfig | 13 +
include/configs/imx6qdl_icore.h | 131 +++
include/dt-bindings/clock/imx6qdl-clock.h | 274 ++++++
37 files changed, 5195 insertions(+), 16 deletions(-)
create mode 100644 arch/arm/dts/imx6dl-icore.dts
create mode 100644 arch/arm/dts/imx6dl-pinfunc.h
create mode 100644 arch/arm/dts/imx6dl.dtsi
create mode 100644 arch/arm/dts/imx6q-icore.dts
create mode 100644 arch/arm/dts/imx6q-pinfunc.h
create mode 100644 arch/arm/dts/imx6q.dtsi
create mode 100644 arch/arm/dts/imx6qdl-icore.dtsi
create mode 100644 arch/arm/dts/imx6qdl.dtsi
create mode 100644 board/engicam/icorem6/Kconfig
create mode 100644 board/engicam/icorem6/MAINTAINERS
create mode 100644 board/engicam/icorem6/Makefile
create mode 100644 board/engicam/icorem6/README
create mode 100644 board/engicam/icorem6/icorem6.c
create mode 100644 configs/imx6qdl_icore_defconfig
create mode 100644 include/configs/imx6qdl_icore.h
create mode 100644 include/dt-bindings/clock/imx6qdl-clock.h
--
2.7.4
More information about the U-Boot
mailing list