[U-Boot] [Patch v2 0/7] Add LS1046ARDB board support

[Zhiqiang Hou]

> -----Original Message-----
> From: Gong Qianyu [mailto:Qianyu.Gong at nxp.com]
> Sent: 2016年8月31日 18:04
> To: u-boot at lists.denx.de; york sun <york.sun at nxp.com>
> Cc: Prabhakar Kushwaha <prabhakar.kushwaha at nxp.com>; Mingkai Hu
> <mingkai.hu at nxp.com>; Shaohui Xie <shaohui.xie at nxp.com>; Zhiqiang Hou
> <zhiqiang.hou at nxp.com>; Wenbin Song <wenbin.song at nxp.com>;
> Shengzhou Liu <shengzhou.liu at nxp.com>; Qianyu Gong
> <qianyu.gong at nxp.com>
> Subject: [Patch v2 0/7] Add LS1046ARDB board support
> 
> Hi all,
> 
> This is version 2 patchset mainly to add support for LS1046ARDB board.
> It should be based on two DDR patches to work well on LS1046ARDB.
> The two patches are:
> http://patchwork.ozlabs.org/patch/663534/
> http://patchwork.ozlabs.org/patch/663535/
> 
> PCIe and USB are not supported yet due to lack of some driver patches and I'll
> add them once they're ready for upstream.
> Please help to review. Thanks very much!
> 
> Changes in v2:
>  - Add ERRATUM_A008511.
>  - Use values directly instead of macros for SATA ECC.
>  - Add >60 characters' paragraph for the board help.
>  - Fix the memory map in readme.
>  - Remove unused flash r/w functions.
>  - Remove DDR3 defines.
>  - Revise some commit messages.

Qianyu, the peripherals' input clock are different between LS1043A and LS1046A,
so please add the patch http://sw-stash.freescale.net/users/b48286/repos/ls1046a-uboot/commits/777371b0697318ed14a7eabaf46c97d683dfce61 to fix it.

Thanks,
Zhiqiang