[U-Boot] configs: am4xhs: Modify SPL load address to fix UART boot issue

Tom Rini trini at konsulko.com
Wed Sep 7 19:58:35 CEST 2016


On Wed, Aug 24, 2016 at 04:41:22PM -0400, Srinivas, Madan wrote:

> From: Madan Srinivas <madans at ti.com>
> 
> An issue in the TI secure image generation tool causes the ROM to
> load the SPL at a different load address than what is specified by
> CONFIG_ISW_ENTRY_ADDR while doing a peripheral boot on HS devices.
> 
> This causes the SPL to fail on secure devices during peripheral
> boot.
> 
> The TI secure image generation tool has been fixed so that the SPL
> will always be loaded at 0x403018E0 by the ROM code for both
> peripheral and memory boot modes.
> 
> Signed-off-by: Madan Srinivas <madans at ti.com>
> Reviewed-by: Nishanth Menon <nm at ti.com>
> Acked-by: Lokesh Vutla <lokeshvutla at ti.com>
> Reviewed-by: Tom Rini <trini at konsulko.com>

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160907/5e350f81/attachment.sig>


More information about the U-Boot mailing list