[U-Boot] [PATCH RFC 5/5] imx: mx6ul: Add initial board support for Engicam GEAM6UL

Jagan Teki jagan at amarulasolutions.com
Sun Sep 4 04:22:24 CEST 2016


On Sun, Sep 4, 2016 at 6:56 AM, Fabio Estevam <festevam at gmail.com> wrote:
> On Sat, Sep 3, 2016 at 5:22 AM, Jagan Teki <jagannadh.teki at gmail.com> wrote:
>> i.MX6UL GEA M6UL modules are system on module solutions manufactured
>> by Engicam with following characteristics:
>> Processor       NXP i.MX 6UltraLite MCIMX6G2, 528 MHz
>> RAM             128MB, 16-bit DDR3
>> NAND SLC        256MB
>> Power supply    Single 5V
>> MAX LCD RES     up to WXGA, 1366x768
>>
>> Cc: Stefano Babic <sbabic at denx.de>
>> Cc: Peng Fan <peng.fan at nxp.com>
>> Cc: Michael Trimarchi <michael at amarulasolutions.com>
>> Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
>> ---
>>  arch/arm/cpu/armv7/mx6/Kconfig    |  6 ++++++
>>  board/freescale/mx6ul/Kconfig     |  2 +-
>
> This file does not exist.
>
>>  board/freescale/mx6ul/MAINTAINERS |  5 +++++
>>  board/freescale/mx6ul/board.c     |  4 +++-
>
> This file does not exist.
>
>>  configs/mx6ul_geam_kit_defconfig  | 11 +++++++++++
>>  include/configs/mx6ul.h           |  1 +
>
> This file does not exist.

These files are the outcomes of previous patches on this series,
please find that.

>
> You should generate a patch against u-boot-imx git tree.

OK, will do that.

thanks!
-- 
Jagan.


More information about the U-Boot mailing list