[U-Boot] [RFC Patch 1/5] armv8: ls1046a: Convert CONFIG_LS1046A to Kconfig option ARCH_LS1046A
York Sun
york.sun at nxp.com
Thu Sep 22 00:51:14 CEST 2016
Move this option to Kconfig and clean up existing uses.
Signed-off-by: York Sun <york.sun at nxp.com>
CC: Mingkai Hu <mingkai.hu at nxp.com>
CC: Gong Qianyu <Qianyu.Gong at nxp.com>
---
arch/arm/Kconfig | 4 ++++
arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 2 ++
arch/arm/cpu/armv8/fsl-layerscape/Makefile | 2 +-
arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S | 2 +-
arch/arm/cpu/armv8/fsl-layerscape/soc.c | 2 +-
arch/arm/include/asm/arch-fsl-layerscape/config.h | 3 ++-
drivers/net/fm/Makefile | 2 +-
include/configs/ls1046a_common.h | 1 -
8 files changed, 12 insertions(+), 6 deletions(-)
create mode 100644 arch/arm/cpu/armv8/fsl-layerscape/Kconfig
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 1560bcc..aed89c9 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -843,6 +843,7 @@ config TARGET_LS1043ARDB
config TARGET_LS1046AQDS
bool "Support ls1046aqds"
+ select ARCH_LS1046A
select ARM64
select ARMV8_MULTIENTRY
select SUPPORT_SPL
@@ -855,6 +856,7 @@ config TARGET_LS1046AQDS
config TARGET_LS1046ARDB
bool "Support ls1046ardb"
+ select ARCH_LS1046A
select ARM64
select ARMV8_MULTIENTRY
select SUPPORT_SPL
@@ -951,6 +953,8 @@ source "arch/arm/cpu/armv7/mx5/Kconfig"
source "arch/arm/cpu/armv7/omap-common/Kconfig"
+source "arch/arm/cpu/armv8/fsl-layerscape/Kconfig"
+
source "arch/arm/mach-orion5x/Kconfig"
source "arch/arm/mach-rmobile/Kconfig"
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
new file mode 100644
index 0000000..c234eff
--- /dev/null
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
@@ -0,0 +1,2 @@
+config ARCH_LS1046A
+ bool "Freescale Layerscape LS1046A SoC"
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Makefile b/arch/arm/cpu/armv8/fsl-layerscape/Makefile
index 8c1317f..f9590af 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/Makefile
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Makefile
@@ -34,6 +34,6 @@ ifneq ($(CONFIG_LS1012A),)
obj-$(CONFIG_SYS_HAS_SERDES) += ls1012a_serdes.o
endif
-ifneq ($(CONFIG_LS1046A),)
+ifneq ($(CONFIG_ARCH_LS1046A),)
obj-$(CONFIG_SYS_HAS_SERDES) += ls1046a_serdes.o
endif
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S b/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S
index 6451a36..5d0b7a4 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S
+++ b/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S
@@ -180,7 +180,7 @@ ENTRY(lowlevel_init)
dsb sy
#endif
-#ifdef CONFIG_LS1046A
+#ifdef CONFIG_ARCH_LS1046A
/* Initialize the L2 RAM latency */
mrs x1, S3_1_c11_c0_2
mov x0, #0x1C7
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/soc.c b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
index 5ca721d..463d1e3 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/soc.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
@@ -228,7 +228,7 @@ int sata_init(void)
{
struct ccsr_ahci __iomem *ccsr_ahci = (void *)CONFIG_SYS_SATA;
-#ifdef CONFIG_LS1046A
+#ifdef CONFIG_ARCH_LS1046A
/* Disable SATA ECC */
out_le32((void *)CONFIG_SYS_DCSR_DCFG_ADDR + 0x520, 0x80000000);
#endif
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/config.h b/arch/arm/include/asm/arch-fsl-layerscape/config.h
index 81a5e7c..e7c7d98 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/config.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/config.h
@@ -7,6 +7,7 @@
#ifndef _ASM_ARMV8_FSL_LAYERSCAPE_CONFIG_H_
#define _ASM_ARMV8_FSL_LAYERSCAPE_CONFIG_H_
+#include <linux/kconfig.h>
#include <fsl_ddrc_version.h>
#define CONFIG_STANDALONE_LOAD_ADDR 0x80300000
@@ -213,7 +214,7 @@
#define GICD_BASE 0x01401000
#define GICC_BASE 0x01402000
-#elif defined(CONFIG_LS1046A)
+#elif defined(CONFIG_ARCH_LS1046A)
#define CONFIG_MAX_CPUS 4
#define CONFIG_SYS_FMAN_V3
#define CONFIG_SYS_NUM_FMAN 1
diff --git a/drivers/net/fm/Makefile b/drivers/net/fm/Makefile
index 344fbe2..316fef4 100644
--- a/drivers/net/fm/Makefile
+++ b/drivers/net/fm/Makefile
@@ -39,4 +39,4 @@ obj-$(CONFIG_PPC_T4080) += t4240.o
obj-$(CONFIG_PPC_B4420) += b4860.o
obj-$(CONFIG_PPC_B4860) += b4860.o
obj-$(CONFIG_LS1043A) += ls1043.o
-obj-$(CONFIG_LS1046A) += ls1046.o
+obj-$(CONFIG_ARCH_LS1046A) += ls1046.o
diff --git a/include/configs/ls1046a_common.h b/include/configs/ls1046a_common.h
index 5856de8..7c5e635 100644
--- a/include/configs/ls1046a_common.h
+++ b/include/configs/ls1046a_common.h
@@ -10,7 +10,6 @@
#define CONFIG_REMAKE_ELF
#define CONFIG_FSL_LAYERSCAPE
#define CONFIG_FSL_LSCH2
-#define CONFIG_LS1046A
#define CONFIG_MP
#define CONFIG_SYS_FSL_CLK
#define CONFIG_GICV2
--
2.7.4
More information about the U-Boot
mailing list