[U-Boot] UBI and UBIFS on ARM64

[Heiko Schocher]

Hello Adam,

Am 07.09.2016 um 11:26 schrieb Adam Oleksy:
> Hi Heiko,
> Thank you, and I understand that you can't say nothing more about this.
> Anyway, I've found workaround... I've just disabled compression for
> ubifs, and problem disappeared.
> I believe I can live with it:).

Sounds risky to me, as I think you have some problem with your nand
driver or io functions ...

bye,
Heiko
>
> 2016-09-07 6:49 GMT+02:00 Heiko Schocher <hs at denx.de>:
>> Hello Adam,
>>
>>
>> Am 07.09.2016 um 06:39 schrieb Heiko Schocher:
>>>
>>> Hello Adam,
>>>
>>> Am 06.09.2016 um 16:44 schrieb Adam Oleksy:
>>>>
>>>> Dear U-Boot community,
>>>> I'm developing software for Xilinx ZynqMP platform, which is made in
>>>> 64-bit architecture. I would like to store every artifact needed to
>>>> boot up on the UBIFS partition. I faced problem, that u-boot does not
>>>> want to compile with enabled UBI/UBIFS support, due to lack of some
>>>> atomic operations on longs. So, I've written them (see
>>>> http://pastebin.com/ibp0Zt99). Please note, that I've written only
>>>> that functions, which are needed by UBI/UBIFS. Then UBIFS started work
>>>> on the target. Almost... because I've found that large files (~20MiB)
>>>> can't be read. I've enabled debug messages, but I don't know how to
>>>> interpret them (please see http://pastebin.com/gByDcdvw). Maybe you
>>>> are able to help me?
>>>> I've also checked how the UBIFS behaves in the Linux, and the result
>>>> is that everything works as expected. It means that I can write large
>>>> files to UBIFS, and read them back successfully.
>>>> Should you need any further information, please do not hesitate to
>>>> contact me.
>>>
>>>
>>> Hard to say ... here an extract of your debug log:
>>>
>>> UBI DBG io (pid 1): read 509 bytes from PEB 1059:10040
>>> UBIFS error (ubi0:0 pid 0): ubifs_check_node: bad magic 0x61018ce,
>>> expected 0x6101831
>>>
>>> Here begin your problem ... for some reasons you do not read the
>>> correct magic number ... I tend to say some problem with your nand
>>> driver and/or io functions, maybe cache setup? Sorry, more I cannot say
>>> ...
>>
>>
>> I am quite sure now:
>> bad magic 0x61018ce, expected 0x6101831
>>                   ^^                  ^^
>>
>> 0xce = !0x31
>>
>> You have read problems ...
>>
>> bye,
>> Heiko
>>
>>
>>> UBIFS error (ubi0:0 pid 0): ubifs_check_node: bad node at LEB 417:9912
>>> Not a node, first 24 bytes:UBIFS error (ubi0:0 pid 0): ubifs_read_node:
>>> expected node type 1
>>> UBIFS DBG tnc: key (67, data, 4679)
>>> UBIFS error (ubi0:0 pid 0): do_readpage: cannot read page 4679 of inode
>>> 67, error -117
>>> Error reading file 'rfsw-image_ramdisk.itb'
>>> UBI DBG gen (pid 1): close device 0, volume 0, mode 1
>>>
>>> bye,
>>> Heiko
>>
>>
>> --
>> DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
>> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
>
>
>

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany