[U-Boot] [PATCH 8/8] dts: rk3399-puma: enable spi1 and spi5, add /spi1/spiflash

[Simon Glass]

On 28 March 2017 at 02:58, Philipp Tomsich
<philipp.tomsich at theobroma-systems.com> wrote:
> From: Jakob Unterwurzacher <jakob.unterwurzacher at theobroma-systems.com>
>
> The RK3399-Q7 (Puma) unsually (this is a build-time option for
> customised boards) has an on-module SPI-flash connected to SPI1.
> As of today, this is a Winbond W25Q32DW (32MBit) device.
>
> The SPI5 controller is routed to the Q7 edge connector and provides
> general-purpose SPI connectivity for customer base-boards.
>
> With some minor improvements on integration into our outbound tree
>  - explicitly modelled the SPI flash as 'spiflash' under spi0
>    [dts: rk3399-puma: explicitly model spi-flash under spi1]
>  - renamed the aliases to spi0 and spi1 to allow easier use of
>    commands and legacy (SPL) infrastructure... i.e. the controllers
>    will be 0 and 1 for 'sf probe', 'sspi', etc.
>    [dts: rk3399-puma: rename aliases to number spi as 0 and 1 for commands]
>
> X-AffectedPlatforms: RK3399-Q7
> Signed-off-by: Philipp Tomsich <philipp.tomsich at theobroma-systems.com>
> Tested-by: Jakob Unterwurzacher <jakob.unterwurzacher at theobroma-systems.com>
> ---
>
>  arch/arm/dts/rk3399-puma.dts | 26 ++++++++++++++++++++++++++
>  1 file changed, 26 insertions(+)

Acked-by: Simon Glass <sjg at chromium.org>