[U-Boot] [PATCH v5 1/3] arm: tegra: initial support for apalis tk1

Marcel Ziswiler marcel.ziswiler at toradex.com
Sat Apr 1 20:17:52 UTC 2017


On Fri, 2017-03-31 at 22:22 -0600, Simon Glass wrote:
> Hi Marcel,
> 
> On 24 March 2017 at 18:18, Marcel Ziswiler <marcel at ziswiler.com>
> wrote:
> > From: Marcel Ziswiler <marcel.ziswiler at toradex.com>
> > 
> > This patch adds board support for the Toradex Apalis TK1 a computer
> > on
> > module which can be used on different carrier boards.
> > 
> > The module consists of a Tegra TK1 SoC, a PMIC solution, 2 GB of
> > DDR3L
> > RAM, a bunch of level shifters, an eMMC, a TMP451 temperature
> > sensor
> > chip, an I210 gigabit Ethernet controller and a SGTL5000 audio
> > codec.
> > Furthermore, there is a Kinetis MK20DN512 companion micro
> > controller for
> > analogue, CAN and resistive touch functionality.
> > 
> > For the sake of ease of use we do not distinguish between different
> > carrier boards for now as the base module features are deemed
> > sufficient enough for regular booting.
> > 
> > The following functionality is working so far:
> > - eMMC boot, environment storage and Toradex factory config block
> > - Gigabit Ethernet
> > - MMC/SD cards (both MMC1 as well as SD1 slot)
> > - USB client/host (dual role OTG port as client e.g. for DFU/UMS or
> > host,
> >   other two ports as host)
> > 
> > Signed-off-by: Marcel Ziswiler <marcel.ziswiler at toradex.com>
> > Reviewed-by: Simon Glass <sjg at chromium.org>
> > 
> > Signed-off-by: Marcel Ziswiler <marcel at ziswiler.com>
> > ---
> > 
> > Changes in v5:
> > - Re-enabled EFI loader support after discussion with Alexander.
> 
> Well OK, either way is fine with me.

Thanks, Simon.

Do you happen to know whether anybody will actually pick that series up
and apply it any time soon?

> Regards,
> Simon


More information about the U-Boot mailing list