[U-Boot] [PATCH v5 1/3] arm: tegra: initial support for apalis tk1

[Tom Warren]

Marcel,

u-boot-tegra is my repo, I've been monitoring the discussion here to see if any more changes were in-bound.

I'll apply your 3 v5 patches on Monday and post a new u-boot-tegra/master if it all looks good (applies cleanly, all Tegra boards build OK). 

Thanks,

Tom

> -----Original Message-----
> From: Marcel Ziswiler [mailto:marcel.ziswiler at toradex.com]
> Sent: Saturday, April 01, 2017 1:18 PM
> To: sjg at chromium.org
> Cc: jh80.chung at samsung.com; Peter.Chubb at data61.csiro.au; Tom Warren
> <TWarren at nvidia.com>; hdegoede at redhat.com; agraf at suse.de; u-
> boot at lists.denx.de; Stephen Warren <swarren at nvidia.com>;
> york.sun at nxp.com; Max Krummenacher <max.krummenacher at toradex.com>;
> hs at denx.de; yamada.masahiro at socionext.com; jagan at amarulasolutions.com;
> lokeshvutla at ti.com; albert.u.boot at aribaud.net; Stefan Agner
> <stefan.agner at toradex.com>
> Subject: Re: [PATCH v5 1/3] arm: tegra: initial support for apalis tk1
> 
> On Fri, 2017-03-31 at 22:22 -0600, Simon Glass wrote:
> > Hi Marcel,
> >
> > On 24 March 2017 at 18:18, Marcel Ziswiler <marcel at ziswiler.com>
> > wrote:
> > > From: Marcel Ziswiler <marcel.ziswiler at toradex.com>
> > >
> > > This patch adds board support for the Toradex Apalis TK1 a computer
> > > on module which can be used on different carrier boards.
> > >
> > > The module consists of a Tegra TK1 SoC, a PMIC solution, 2 GB of
> > > DDR3L RAM, a bunch of level shifters, an eMMC, a TMP451 temperature
> > > sensor chip, an I210 gigabit Ethernet controller and a SGTL5000
> > > audio codec.
> > > Furthermore, there is a Kinetis MK20DN512 companion micro controller
> > > for analogue, CAN and resistive touch functionality.
> > >
> > > For the sake of ease of use we do not distinguish between different
> > > carrier boards for now as the base module features are deemed
> > > sufficient enough for regular booting.
> > >
> > > The following functionality is working so far:
> > > - eMMC boot, environment storage and Toradex factory config block
> > > - Gigabit Ethernet
> > > - MMC/SD cards (both MMC1 as well as SD1 slot)
> > > - USB client/host (dual role OTG port as client e.g. for DFU/UMS or
> > > host,
> > >   other two ports as host)
> > >
> > > Signed-off-by: Marcel Ziswiler <marcel.ziswiler at toradex.com>
> > > Reviewed-by: Simon Glass <sjg at chromium.org>
> > >
> > > Signed-off-by: Marcel Ziswiler <marcel at ziswiler.com>
> > > ---
> > >
> > > Changes in v5:
> > > - Re-enabled EFI loader support after discussion with Alexander.
> >
> > Well OK, either way is fine with me.
> 
> Thanks, Simon.
> 
> Do you happen to know whether anybody will actually pick that series up and
> apply it any time soon?
> 
> > Regards,
> > Simon

-----------------------------------------------------------------------------------
This email message is for the sole use of the intended recipient(s) and may contain
confidential information.  Any unauthorized review, use, disclosure or distribution
is prohibited.  If you are not the intended recipient, please contact the sender by
reply email and destroy all copies of the original message.
-----------------------------------------------------------------------------------