[U-Boot] [PATCH v2 07/29] ARM: i.MX6QP: sabresd: Add initial devicetree support

[Fabio Estevam]

On Mon, Apr 3, 2017 at 10:53 AM, Jagan Teki <jagan at openedev.com> wrote:
> From: Jagan Teki <jagan at amarulasolutions.com>
>
> Add initial dts support for i.MX6 Quad Plus Sabresd board.
>
> Boot from MMC:
> -------------
> U-Boot SPL 2017.03-33690-ga80e4f6-dirty (Mar 30 2017 - 00:40:29)
> Trying to boot from MMC1
>
> U-Boot 2017.03-33690-ga80e4f6-dirty (Mar 30 2017 - 00:40:29 +0530)
>
> CPU:   Freescale i.MX6QP rev1.0 996 MHz (running at 792 MHz)
> CPU:   Automotive temperature grade (-40C to 125C) at 29C
> Reset cause: POR
> Model: Freescale i.MX6 Quad Plus SABRE Smart Device Board
> Board: MX6-SabreSD
> I2C:   ready
> DRAM:  1 GiB
> PMIC:  PFUZE100 ID=0x10
> MMC:   FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2
> *** Warning - bad CRC, using default environment
>
> gpio at 020a4000: dir_output: error: gpio GPIO3_19 not reserved
> gpio at 020a4000: set_value: error: gpio GPIO3_19 not reserved
> gpio at 020b4000: dir_output: error: gpio GPIO7_12 not reserved
> gpio at 020b4000: set_value: error: gpio GPIO7_12 not reserved

Do you plan to fix these errors?